International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental investigations of higher-order springing and whipping-WILS project

  • Hong, Sa Young (Korea Research Institute of Ships and Ocean Engineering) ;
  • Kim, Byoung Wan (Korea Research Institute of Ships and Ocean Engineering)
  • Published : 2014.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Springing and whipping are becoming increasingly important considerations in ship design as container ships increase in size. In this study, the springing and whipping characteristics of a large container ship were investigated through a series of systematic model tests in waves. A multi-segmented hull model with a backbone was adopted for measurement of springing and whipping signals. A conversion method for extracting torsion springing and whipping is described in this paper for the case of an open-section backbone. Higher-order springing, higher-mode torsion responses, and the effects of linear and nonlinear springing in irregular waves are highlighted in the discussion.

Keywords

References

  1. Bigot, F., Derbanne, Q., Sireta, F.X. and Malenica, S., Tuitman, J.T., 2011. Global hydroelastic ship response comparison of numerical model and WILS model test. Proceeding of $21^{st}$ International Offshore and Polar Engineering Conference, Maui, USA, 19-24 June 2011, pp.477-485.
  2. Hong, S.Y., Kyoung, J.H., Kim, Y.S., Song, K.H., Kim, S., Malenica, S., Lindgren, M., Rathje, H. and GE, C., 2008. Validation of wave loads on a large container ship in oblique waves. Proceeding The $6^{th}$ Osaka Colloquium on Seakeeping and stability of ships, Osaka, Japan, 26-29 March 2008, pp.109-117.
  3. Hong, S.Y., Kim, B.W. and Nam, B.W., 2011. Experimental study on torsion springing and whipping of large container ship. Proceeding of $21^{st}$ International Offshore and Polar Engineering Conference, Maui, USA, 19-24 June 2011, pp.97-107.
  4. Hong, S.Y., Kim, B.W. and Nam, B.W., 2012. Experimental study on torsion springing and whipping of large container ship. International Journal of Offshore and Polar Engineering, 22(2), pp.97-107.
  5. Iijima, K., Hermundstad, O.A., Zhu, S. and Moan, T., 2009. Symmetric and antisymmetric vibrations of a hydroelastically scaled model. Proceedings of$5^{th}$ International Conference on Hydroelasticity in Marine Technology, Southampton, UK, 6-10 September 2009, pp.173-182.
  6. Kim, B.W., Kim, K.H., Kim, Y.S. and Hong, S.Y., 2014. Torsion moment conversion methods in model test with U-shape backbone. Proceefing of the $24^{th}$ International Ocean and Polar Engineering Conference, Busan, Korea, 15-20 June 2014, pp.782-791.
  7. Miyake, R., Matsumoto, T., Zhu, T., Usami, A. and Dobashi, H., 2009. Experimental studies on the hydroelastic response using a flexible mega-container ship model. Proceeding of $51^{th}$ International Conference on Hydroelasticity in Marine Technology, Southampton, UK, 6-10 September 2009, pp.161 -171.
  8. Noran Engineering, Inc., 2011. User's manual and reference manual of NE/NASTRAN. USA: Noran Engineering, Inc.
  9. Oka, M., Oka, S. and Ogawa, Y., 2009. An experimental study on wave loads of a large container ship and its hydroelastic vibration. Proc $5^{th}$ Int Conf on Hydroelasticity in Marine Technology, Southampton, UK, 6-10 September 2009, pp. 183-192.
  10. Oberhagemann, J., Moctar, O. and Rathje, H., 2010. Fluid-structure interaction using free-surface RANSE for springing and whipping. Proceeding of $13^{th}$ Numerical Towing Tank Symposium, Duisburg, Germany, 10-12 October 2010.
  11. Remy, F., Molin, B. and Ledoux, A., 2006. Experimental and numerical study of the wave response of a flexible barge. Proceeding of $4^{th}$ International Conference on Hydroelasticity in Marine Technology, Wuxi, China, 10-14 September 2006, pp.255-264.
  12. Storhaug, G. and Moan, T., 2006. Spring/whipping response of a large ocean-going vessel-investigated by an experimental method. Proc $4^{th}$ Int Conf on Hydroelasticity in Marine Technology, Wuxi, China, 10-14 September 2006, pp.89-101.