• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.957-965
• /
• 2012

Korean government has been preparing the introduction of Emission Trading as part of the framework convention on Climate Change as a relief of negative downstream effect over electricity industry. This paper develops a mathematical model amenable to analyzing the economic impact of introduced emission trading system on the national generation expansion planning. The developed model was also employed with a case study to verify its applicability.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.339-346
• /
• 2018

A geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is indispensable to assure the disposal safety of high-level radioactive waste. Since the heat generated from spent nuclear fuel in a disposal canister is released to the surrounding buffer materials, the thermal properties of the buffer material are very important in determining the entire disposal safety. Especially, since thermal expansion can cause thermal stress to the intact rock mass in the near-field, it is very important to evaluate thermal expansion characteristics of bentonite buffer materials. Therefore, this paper presents a thermal expansion coefficient prediction model of the Gyeongju bentonite buffer materials which is a Ca-bentonite produced in South Korea. The linear thermal expansion coefficient was measured considering heating rate, dry density and temperature variation using dilatometer equipment. Thermal expansion coefficient values of the Gyeongju bentonite buffer materials were $4.0{\sim}6.0{\times}10^{-6}/^{\circ}C$. Based on the experimental results, a non-linear regression model to predict the thermal expansion coefficient was suggested and fitted according to the dry density.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.206-214
• /
• 2007

The theoretical study is developed for predicting the thermal expansion changes of composites which include complex inclusion, which is used three-dimensional ellipsoid model ($a_1>a_2>a_3$), which has two aspect ratios (the primary aspect ratio, $\rho_{\alpha}=a_1/a_3$ and the secondary aspect ratio, $\rho_{\beta}=a_1/a_2$). We can predict the feature of general thermal expansion factors by theoretical approach of matrix with aligned ellipsoidal inclusion using the Eshelby's equivalent tensor. The coefficients of longitudinal linear thermal expansion ${\alpha}_{11}$ decrease to those of inclusions, ${\alpha}_f$, as both aspect ratios increase. The coefficients of transverse linear thermal expansion of composites ${\alpha}_{33}$ initially increase and show the parabolic corves with maximum values, as the concentrations of filler increase. The coefficient of thermal expansion, ${\alpha}_{22}$ in the transverse direction decreases, as $\rho_{\alpha}$ increases, however, ${\alpha}_{22}$ increases as $\rho_{\beta}$ increases. The coefficient of linear thermal expansion of composites, ${\alpha}_{33}$ in the normal direction increases, as $\rho_{\alpha}$ increases, while ${\alpha}_{33}$ decreases as $\rho_{\beta}$ increases.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.173-180
• /
• 2004

Quadtree, which 11 a hierarchical data structure, is a very important data structure to represent images. The linear quadtree representation as a way to store a quadtree is efficient to save space compared with other representations. Therefore, it has been widely studied to develop efficient algorithms to execute operations related to quadtrees. The region expansion is an operation to expand images by a given distance and the scaling If an operation to scale images by a given scale factor. In this paper, we present algorithms to perform the region expansion and scaling of images represented by quadtrees, using three-dimensional n${\times}$n${\times}$n processors on RMESH(Reconfigurable MESH). These algorithms have constant time complexities by using efficient basic operations to route the locational codes of quadtree on the hierarchical structure of n${\times}$n${\times}$n RMESH.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.147-151
• /
• 2010

Since the kinetic energy is dissipated through plastic deformation energy generated in expanding process of the tube by a die. In order to successfully absorb the kinetic energy there should be no buckling in the expansion tube during expanding process. The buckling instability of the expansion tubes is affected by the initial boundary conditions, tube thickness and length. In this study, the effects of the tube thickness except length and initial boundary condition on the buckling instability are studied using a finite element method. In addition, Analysis procedure for nonlinear post-buckling analysis of expansion tube is established. There are three kinds of finite element analysis procedures for buckling analysis of expansion tube, quasi-static analysis, linear buckling analysis and nonlinear post-buckling analysis. The effect of the geometry imperfections defined as linear superimposition of buckling modes is considered in the nonlinear post-buckling analysis. The results of finite element analysis indicate that the buckling load increase with increase of thickness of tube and geometry imperfection. Finial buckling shapes are changed with respect to the geometry imperfection.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.9-16
• /
• 2011

The feasibility of wave energy extraction from a heaving truncated cylinder and the corresponding response of the linear electric generator (LEG) composed of spring, magnet, and coil has been investigated in the frame of three-dimensional linear potential theory. The heaving motion of a circular cylinder is calculated by means of the matched eigenfunction expansion method. Further, the analytical results are validated by numerical results using the ANSYS AQWA commercial code. By the action of a heaving circular cylinder, the magnet suspended by a spring can slide vertically inside the heaving cylinder. The mechanical power is extracted from the magnet motion relative to the coil/stator which is attached to the cylinder. The coupled ODE of a heaving cylinder and LEG system in waves is derived to obtain the magnet motion relative to a cylinder. To maximize the relative motion of the magnet, both the buoy draft and the LEG system parameters (spring stiffness, damping) should be selected properly for generating the double resonance considering the peak frequency of the target spectrum.

• Communications for Statistical Applications and Methods
• /
• v.2 no.2
• /
• pp.296-302
• /
• 1995

When heteroscedasticity occurs in random effects linear model, the error variance may depend on the values of one or more of the explanatory variables or on other relevant quantities such as time or spatial ordering. In this paper we derive a score test as a diagnostic tool for detecting non-constant error variance in random effefts linear model based on the model expansion on error variance. This score test is compared to loglikelihood ratio test.

• Journal of applied mathematics & informatics
• /
• v.35 no.1_2
• /
• pp.165-180
• /
• 2017

In this study, Taylor matrix algorithm is designed for the approximate solution of linear and non-linear differential equation systems. The algorithm is essentially based on the expansion of the functions in differential equation systems to Taylor series and substituting the matrix forms of these expansions into the given equation systems. Using the Mathematica program, the matrix equations are solved and the unknown Taylor coefficients are found approximately. The presented numerical approach is discussed on samples from various linear and non-linear differential equation systems as well as stiff systems. The computational data are then compared with those of some earlier numerical or exact results. As a result, this comparison demonstrates that the proposed method is accurate and reliable.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.

• Journal of the Korean Ceramic Society
• /
• v.13 no.2
• /
• pp.31-38
• /
• 1976

Korean tremoitic talc, wollastonite and clay have been used to develop a wall tile body to appropriate to the fast firing process. Some of ceramic properties of the raw materials were investigated by X-ray diffraction, thermal analysis and chemical analysis. The body compositions were formulated from the range of 35~75% tremolitic talc, 0~30% wollastonite and 25~35% plastic clay. Thermal gravity analysis and thermal expansion were tested for each of unfired bodies to study the correlation between thermal dehydration and linear shrinkage during the firing procedure. Linear shrinkage and water absorption of the fired bodies at the various temperature were taken as a measures for determining the proper firing range of the bodies. Increasing the content of wollastonite and firing temperature, the thermal expansion of the fired body showed the gradual decrease, and the thermal expansion curves showed a tendency to straighten. These observations may be resulted from the fact that the amounts of diopside and anorthite formed were gradually increased and those of quartz relatively decreased. The optimum compositions of the wall tile bodies for fast firing are 30% clay, 10~20% wollastonite and 50~60% tremolitic talc.