• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.273-279
• /
• 2005

To develop cosmetics using Jindalae flowers (Rhododendron mucronulatum), the surface tensions of extracts were measured and the properties and stability of cream with extracts were investigated. The surface tension of 0.1% ethanol extract was 30.42 mN/m and that of distilled water was 72.2 mN/m. The surface tension of cream with 0.1% ethanol extract was similar to that of sample cream and the measured pH were weakly alkalic. The surface tension of 1% ethanol extract was the lowest value of 24.98 mN/m, the measured pH of cream with 1% ethanol extract was weakly acidic and the particle size of cream was stable. According to an oscillatory test, linear viscoelastic region was extended by adding of 1% water extract and 1% ethanol extract to cream, indicating that the cream had greater enhanced resistance for preserving inner structure as compared to outside stress.　Besides, as a result of the diminished loss angle of ethanol extract cream, the elasticity of cream was increased more than that of sample cream and cream with 0.1% ethanol extract. In contrast, in the case of the increased loss angle of water extract cream, the viscosity of cream was increased. In conclusion, Rhododendron mucronulatum can be deliberated as a cosmetic material because 0.1% water and ethanol extracts showed efficacious physiological activities and cream with 1% extracts could extend linear viscoelastic region.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.124-129
• /
• 2007

Prediction methods for a rotor averaged inflow in forward flight are investigated in this study. The investigated methods are Drees linear inflow model, Mangler & Squire model and free vortex wake(FVW) method. Predictions have been performed for a four-blade rotor operating at three different advance ratios i.e. 0.15, 0.23 and 0.30, at which experimental data are available. According to results, Drees model has a limitation for the inflow non-uniformity prediction due to an inherent linear characteristics. Mangler & Squire model has a reasonable accuracy except the disk edge region. KARI FVW method has very good accuracy and has better accuracy than the other FVW method especially in inboard region. However, there are some discrepancies in retreating side due to the dynamic stall effect and in near hub region due to the fuselage upwash effect.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.304-309
• /
• 2002

We propose the computation reduction method of real root method that is mainly used in the CELP (Code Excited Linear Prediction) vocoder. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSP. However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. In this paper, to reduce the computation time of real root, we compare the real root method with two methods. In first method, we use the mal scale of searching frequency region that is linear below 1 kHz and logarithmic above. In second method, The searching frequency region and searching interval are ordered by each coefficient's distribution. In order to compare real root method with proposed methods, we measured the following two. First, we compared the position of transformed LSP (Line Spectrum Pairs) parameters in the proposed methods with these of real root method. Second, we measured how long computation time is reduced. The experimental results of both methods that the searching time was reduced by about 47% in average without the change of LSP parameters.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.351-361
• /
• 2014

Leaf area ($A_0$) and leaf biomass ($M_0$) estimation are significant prerequisites to studying tree physiological processes and modeling in the forest ecosystem. The objective of this study was to develop allometric models for estimating $A_0$ and $M_0$ of Swietenia mahagoni L. from different tree parameters such as DBH and tree height of mahogany plantations in the northeastern region of Bangladesh. A total of 850 healthy and well formed trees were selected randomly for sampling in the five study sites. Then, twenty two models were developed based on different statistical criteria that propose reliable and accurate models for estimating the $A_0$ and $M_0$ using non-destructive measurements. The results exposed that model iv and xv were selected on a single predictor of DBH and showed more statistically accuracy than other models. The selected models were also validated with an additional test data set on the basis of linear regression and t-test for mean difference between observed and predicted values. After that, a comparison between the best logarithmic and non-linear allometric model shows that the non-linear model produces systematic biases and underestimates $A_0$ and $M_0$ for larger trees. As a result, it showed that the bias-corrected logarithmic model iv and xv can be used to help quantify forest structure and functions, particularly valuable in future research for estimating $A_0$ and $M_0$ of S. mahagoni in this region.

• Journal of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2007

About 10 percent of quasars are known to exhibit deep broad absorption troughs blueward of prominent permitted emission lines, which are usually attributed to the existence of outflows slightly above he accretion disk around the supermassive black hole. Typical widths up to 0.2c of these absorption roughs indicate the velocity scales in which special relativistic effects may not be negligible. Under he assumption of the ubiquity of the broad absorption line region in quasars, the broad emission line flux will exhibit Thomson scattered components from these fast outflows. In this paper, we provide our Monte Carlo calculation of linear polarization of singly Thomson scattered line radiation with the careful considerations of special relativistic effects. The scattering region is approximated by a collection of rings that are moving outward with speeds ${\upsilon}=c{\beta}<0.2c$ near the equatorial plane, and the scattered line photons are collected according to its direction and wavelength in the observer's rest frame. We find that the significantly extended red tail appears in the scattered radiation. We also find that the linear degree of polarization of singly Thomson scattered line radiation is wavelength-dependent and hat there are significant differences in the linear degree of polarization from that computed from classical physics in the far red tail. We propose that the semi-forbidden broad emission line C III]1909 may be significantly contributed from Thomson scattering because this line has small resonance scattering optical depth in the broad absorption line region, which leads to distinct and significant polarized flux in this broad emission line.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.60-65
• /
• 2020

The monopulse tracking algorithm can estimate the location of a partner station based on an RF (Radio Frequency) signal. The location of the partner station is estimated based on the monopulse ratio curve (MR-C), which is calculated based on the sum and difference signal patterns of an antenna. Therefore, the range in which the estimated location can be calculated with high accuracy increases in proportion to the linear region of MR-C. In this paper, we proposed a method to extend the linear region of the MR-C curve using the beamforming technique for the tracking antenna system using the active phased array antenna. Simulation results based on the same antenna system, it was confirmed that the linear region of MR-C was enlarged by about twice as much as the general case where the proposed method was not applied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.469-476
• /
• 2023

Soil plasticity models for cyclic and dynamic loads are essential in non-linear numerical analysis of geotechnical structures. While a single yield surface model shows a linear behavior for cyclic loads, J₂-bounding surface plasticity model with zero elastic region can effectively simulate a nonlinearity of the ground response with the same material properties. The radius of the yield surface inside the boundary surface converged to 0 to make the elastic region disappear, and plastic hardening modulus and dilatancy define plastic strain increment. This paper presents the stress-strain incremental equation of the developed model, and derives plastic hardening modulus for the hyperbolic model. The comparative analyses of the triaxial compression test and the shallow foundation under the cyclic load can show stable numerical convergence, consistency with the theoretical solution, and hysteresis behavior. In addition, plastic hardening modulus for the modified hyperbolic function is presented, and a methodology to estimate model variables conforming 1D equivalent linear model is proposed for numerical modeling of the multi-dimensional behavior of the ground.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.3
• /
• pp.187-201
• /
• 1994

This paper introduces an effective hybridization of the usual simplex method and an interior point method in the convergent framework of Dembo and Sahi. We formulate a specific and detailed algorithm (HYBRID) and report the results of some preliminary testing on small dense problems for its viability. By piercing through the feasible region, the newly developed hybrid algorithm avoids the combinatorial structure of linear programs, and several other interesting and important characteristics of this algorithm are also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.884-889
• /
• 1989

In this paper, a new procedure for selecting weighting matrices in linear discrete time quadratic optimal control problem (LQ-problem) is proposed. In LQ-problems, the quadratic weighting matrices are usually decided on trial and error in order to get a good response. But using the proposed method, the quadratic weights are decided in such a way that all poles of the closed loop system are located in a desired region for good responses as well as for stability and values of the quadratic cost function are kept less then a specified value.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.3-10
• /
• 2001

In order to establish the intensity-magnitude relation far the Korean earthquakes, those relations for the earthquakes in the Sino-Korean craton were estimated. In this process, earthquake data of northeastern China region whose geological environment is similar to Korea Peninsula were also utilized. These data were analyzed not only with linear fit, but also with non-linear fit. The fellowing relation, M=0.57 $\times$ 1$_{e}$ + 2.86, seems appropriate for the present, but its validity should be tested more in the future.e.