• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.19-26
• /
• 2010

Batch experiments were conducted to investigate growth and nutrient removal performance of microalgae Chlorella vulgaris by using piggery wastewater in different concentration of pollutants and the common growth models (logistic, Gompertz and Richards) were applied to compare microalgal growth parameters. Removal of nitrogen (N) and phosphorus (P) by Chlorella vulgaris showed correlation with biomass increase, implying nutrient uptake coupled with microalgae growth. The higher the levels of suspended solids (SS), COD and ammonia nitrogen were in the wastewater, the worse growth of Chlorella vulgaris was observed, showing the occurrence of growth inhibition in higher concentration of those pollutants. The growth parameters were estimated by non-linear regression of three growth curves for comparative analyses. Determination of growth parameters were more accurate with population as a variable than the logarithm of population in terms of R square. Richards model represented better fit comparing with logistic and Gompertz model. However, Richards model showed some complexity and sensitivity in calculation. In the cases tested, both logistic and Gompertz equation were proper to describe the growth of microalgae on piggery wastewater as well as easy to application.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.89-96
• /
• 2015

Explicit numerical integration methods for power system transient stability simulation require very small time steps to avoid numerical instability. The EXST1 exciter model is a primary source of fast dynamics in power system transients. In case of the EXST1, the required small integration time step for entire system simulation increases the computational demands in terms of running time and storage. This paper presents a practical exciter model reduction approach which allows the increase of the required step size and thus the method can decrease the computational demands. The fast dynamics in the original EXST1 are eliminated in the reduced exciter model. The use of a larger time step improves the computational efficiency. This paper describes the way to eliminate the fast dynamics from the original exciter model based on linear system theory. In order to validate the performance of the proposed method, case studies with the GSO-37 bus system are provided. Comparisons between the original and reduced models are made in simulation accuracy and critical clearing time.

• Earthquakes and Structures
• /
• v.9 no.2
• /
• pp.375-390
• /
• 2015

Staircase is a vertical transportation element commonly used in every multistoried structure. Inclined flights of staircase are usually casted monolithically with RC frame. The structural configuration of stairs generally introduces discontinuities into the typical regular reinforced concrete frame composed of beams and columns. Inclined position of flight transfers both vertical as well as horizontal forces in the frame. Under lateral loading, staircase in a multistory RC frame building develops truss action creating a local stiffening effect. In case of seismic event the stiff area around staircase attracts larger force. Therefore, special attention is required while modeling and analyzing the building with staircase. However, in general design practice, designers usually ignore the staircase while modeling either due to ignorance or to avoid complexity. A numerical study has been conducted to examine the effect of ignoring staircase in modeling and design of RC frame buildings while they are really present in structure, may be at different locations. Linear dynamic analysis is performed on nine separate building models to evaluate influence of staircase on dynamic characteristics of building, followed by nonlinear static analysis on the same models to access their seismic performance. It is observed that effect of ignoring staircase in modeling is severe and leads to unsafe structure. Effect of location and orientation of staircase is also important in determining seismic performance of RC frame buildings.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.627-634
• /
• 2017

Predicting the compressive strength of concrete is important to assess the load-carrying capacity of a structure. However, the use of blended cements to accrue the technical, economic and environmental benefits has increased the complexity of prediction models. Artificial Neural Networks (ANNs) have been used for predicting the compressive strength of ordinary Portland cement concrete, i.e., concrete produced without the addition of supplementary cementing materials. In this study, models to predict the compressive strength of blended cement concrete prepared with a natural pozzolan were developed using regression models and single- and 2-phase learning ANNs. Back-propagation (BP), Levenberg-Marquardt (LM) and Conjugate Gradient Descent (CGD) methods were used for training the ANNs. A 2-phase learning algorithm is proposed for the first time in this study for predictive modeling of the compressive strength of blended cement concrete. The output of these predictive models indicates that the use of a 2-phase learning algorithm will provide better results than the linear regression model or the traditional single-phase ANN models.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1140-1155
• /
• 2021

Up to now, many state-of-arts have been proposed for two-way relaying system with linear modulations. The performances of antenna selection (AS) at both transmit and relay nodes need to be investigated in some two-way relaying multiple-input multiple-output (TWRM) systems. In this paper, the goal is focused on the study of nonlinear modulations, i.e., continuous phase modulation (CPM) in TWRM systems. Firstly, the joint phase trellis are simplified by reversed Rimoldi processing so as to reduce the systems' complexity. Then the performances of joint transmit and receive antenna selection (JTRAS) with CPM modulations in two-way relaying MIMO systems are analyzed. More exactly, the pair wise probability (PEP) is used to evaluate the error performance based on the CPM signal matrix, which is calculated in terms of Laurent expression. Since the channels subject to two terminal nodes share common antennas at relay node R in multiple-access scheme, we revise the JTRAS algorithm and compare it to existing algorithm via simulation. Finally, the error performances for various schemes of antenna selection are simulated and compared to the analysis in this paper.

• Smart Structures and Systems
• /
• v.24 no.1
• /
• pp.27-35
• /
• 2019

This paper proposes a quantitative criterion for optimization of actuator placement for the Prestress-Accumulation Release (PAR) strategy of mitigation of vibrations. The PAR strategy is a recently developed semi-active control approach that relies on controlled redistribution of vibration energy into high-order modes, which are high-frequency and thus effectively dissipated by means of the natural mechanisms of material damping. The energy transfer is achieved by a controlled temporary removal of selected structural constraints. This paper considers a short-time decoupling of rotational degrees of freedom in a frame node so that the bending moments temporarily cease to be transferred between the involved beams. We propose and test a quantitative criterion for placement of such actuators. The criterion is based on local modal strain energy that can be released into high-order modes. The numerical time complexity is linear with respect to the number of actuators and potential placements, which facilitates quick analysis in case of large structures.

• Child Health Nursing Research
• /
• v.25 no.3
• /
• pp.262-272
• /
• 2019

Purpose: We aimed to identify factors influencing physical activity in adolescents with complex congenital heart disease. Methods: We recruited 92 adolescents with complex congenital heart disease from a tertiary medical center in Seoul, measured their levels of physical activity, and identified factors that influenced their physical activity levels using the Global Physical Activity Questionnaire, the New York Heart Association classification, congenital heart disease complexity, the Self-Efficacy Scale, and the Parental Bonding Instrument scale. Stepwise multiple linear regression was used to determine factors influencing physical activity. Results: Total physical activity was higher in males than in females (t=4.46, p<.001). Adolescents who participated in school physical education classes engaged in more physical activity than those who did not (t=6.77, p<.001). Higher self-efficacy (${\beta}=.41$, p<.001), male gender (${\beta}=.37$, p<.001) and participation in school physical education classes (${\beta}=.19$, p=.042) were associated with a higher likelihood of engagement in physical activity. Conclusion: It is necessary to develop nursing interventions that enhance self-efficacy in order to promote physical activity in adolescents with complex congenital heart disease. Physical activity should also be promoted in an individualized manner, taking into account gender, disease severity, and parental attitude.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2454-2468
• /
• 2019

The existing direct position determinations(DPD) for coherently distributed(CD) sources are mostly applicable for uniform linear array(ULA), which result in a low degree of freedom(DOF), and it is difficult for them to realize the effective positioning in underdetermined condition. In this paper, a novel DPD algorithm for coherently distributed sources based on compressed sensing with a moving nested array is present. In this algorithm, the nested array is introduced to DPD firstly, and a positioning model of signal moving station based on nested array is constructed. Owing to the features of coherently distributed sources, the cost function of compressed sensing is established based on vectorization. For the sake of convenience, unconstrained transformation and convex transformation of cost functions are carried out. Finally, the position coordinates of the distribution source signals are obtained according to the theory of optimization. At the same time, the complexity is analyzed, and the simulation results show that, in comparison with two-step positioning algorithms and subspace-based algorithms, the proposed algorithm effectively solves the positioning problem in underdetermined condition with the same physical element number.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.305-326
• /
• 2019

Discriminative correlation filter (DCF) based tracking algorithms have recently shown impressive performance on benchmark datasets. However, amount of recent researches are vulnerable to heavy occlusions, irregular deformations and so on. In this paper, we intend to solve these problems and handle the contradiction between accuracy and real-time in the framework of tracking-by-detection. Firstly, we propose an innovative strategy to combine the template and color-based models instead of a simple linear superposition and rely on the strengths of both to promote the accuracy. Secondly, to enhance the discriminative power of the learned template model, the spatial regularization is introduced in the learning stage to penalize the objective boundary information corresponding to features in the background. Thirdly, we utilize a discriminative multi-scale estimate method to solve the problem of scale variations. Finally, we research strategies to limit the computational complexity of our tracker. Abundant experiments demonstrate that our tracker performs superiorly against several advanced algorithms on both the OTB2013 and OTB2015 datasets while maintaining the high frame rates.

• Journal of Nutrition and Health
• /
• v.52 no.1
• /
• pp.1-5
• /
• 2019

Purpose: This review describes the historical changes in nutrition philosophy from a reductionist to a holistic approach during the $20^{th}$ century. Also, the role and efficient use of a holistic approach to precision nutrition are discussed. Results: Over the past century, significant progress has been made in human nutrition research, unraveling fundamental mechanisms of single nutrients on single targets or pathways. This kind of a reductionist approach has helped to save populations from nutrient deficiency diseases and improve associated health outcomes in large parts of the world. However, a new set of nutrition problems, like obesity and diet-related chronic diseases, are growing each year worldwide, increasing the financial burden on the health care system. A linear cause-effect association between single nutrients and a single physiologic effect, is insufficient to solve the complex nutrition-health relationships. Research that involves a more holistic rather than reductionist approach is needed to tackle a new set of nutrition problems. Recent advances in technology, informatics, and statistical methods are enabling an understanding of the diversity of individuals and the complex interactions between foods and human bodies, leading to the concept of "precision nutrition." Conclusion: The emerging goal of precision nutrition is to provide tailored dietary advice for maintaining health and preventing obesity and diet-related chronic diseases. The parts are already being installed. To grab the complexity, reductionism and holism must be used interdependently.