• Laser Solutions
• /
• v.16 no.4
• /
• pp.12-16
• /
• 2013

For mass production of electronic devices, the processing of the printing roll is one of the most important key technologies for printed electronics technology. A roll of printing process, the gravure printing that is used to print the electronic device is most often used. The indirect laser processing has been used in order to produce printing roll for gravure printing. It consists of the following processing that is coating of photo polymer or black lacquer on the surface of printing roll, pattering using a laser beam and etching process. In this study, we have carried out study on the coating and etching for $25{\mu}m$ line width on the printing roll. To do this goals, a $4{\mu}m$ coating thickness and 20% average coating thickness of the coating homogeneity of variance is performed. The factors to determine the thickness and homogeneity are a viscosity of coating solution, the liquid injection, the number of injection, feed rate, rotational speed, and the like. After the laser patterning, a line width of $25{\mu}m$ or less was confirmed to be processed through etching and the chromium plating process.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.461-466
• /
• 2007

There has been a great interest in printing technology as a low cost and mass production method for the application of printed electronics such as printed TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatuses of gravure-offset printing are developed for fine line-width/gap printing and examining pattern distortion occurred in gravure-offset printing process. The fine line-width/gap pattern shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. Pattern distortion is modeled, and the amount and shape of the distortion are calculated by using commercial FEM code. The roll-to-roll printing system under development consists of unwinder/rewinder, two printing units, one coating unit, drying units, guiding unit, vision system, and other auxiliary devices. For multi-layer printing, the system is designed to be capable of printing two different materials.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.776-781
• /
• 2017

In this study, we investigated the effect of electrode pattern design on the thermal shock resistance and temperature uniformity of a ceramic heater. A cordierite substrate with a low thermal expansion coefficient was fabricated by tape casting, and a tungsten electrode was printed and used as a heating element. The temperature distribution of the ceramic heater was calculated by a finite-element method (FEM) by considering various electrode patterns, and the tensile stress distribution due to the thermal stress was calculated. In the electrode pattern with a single-line width, the central part of the ceramic heater was heated to the maximum temperature, and the position of the ceramic heater having a double-line width was changed to the maximum temperature, depending on the position of the minimum line width pattern. The highest tensile stress was found along the edges of the ceramic heater. The temperature gradient at the edge determined the tensile stress intensity. The smallest tensile stress was observed for electrode pattern D, which was expected to be advantageous in resisting thermal shock failures in ceramic heaters.

• Laser Solutions
• /
• v.3 no.2
• /
• pp.35-43
• /
• 2000

Laser direct patterning of the coated photoresit (PMER-NSG31B) layer was studied to make halftone dots on gravure printing roll. The selective laser hardening of photoresist by Ar-ion laser(wavelength : 333.6nm∼363.8nm) was controlled by the A/O modulator. The coating thickness in the range of 5㎛∼11㎛ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines formed under laser power of 200∼260㎽ and irradiation time of 4.4∼6.6$\mu$ sec/point were investigated after developing. The hardened width increased according to the increase of coating thickness. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line widths of 10㎛ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6㎛ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.293-298
• /
• 2011

The most widely used method to form an electrode in industrial solar cells are screen printing. Screen printing is characterized by a relatively simple and well-known production sequence with high throughput rates. However the method is difficult to implement a fine line width of high-efficiency solar cells can not be made. The open circuit voltage(Voc) and the short circuit current density(Jsc) and fill factor(FF) need to be further improved to increase the efficiency of silicon solar cells. In this study, gravure offset printing method using the multicrystalline-silicon solar cells were fabricated. Gravure off-set printing method which can print the fine line width of finger electrode can have the ability reduce the shaded area and increase the Jsc. Moreover it can make a high aspect ratio thereby series resistance is reduced and FF is increased. Approximately $50{\mu}m$ line width with $35{\mu}m$ height was achieved. The efficiency of gravure off set was 0.7% higher compare to that of scree printing method.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.59.2-59.2
• /
• 2013

Wilson and Bappu found a tight correlation between the stellar absolute visual magnitude (MV) and the width of the Ca II K emission line for late-type stars in 1957. Here, we revisit the Wilson-Bappu relationship (hereafter, WBR) to claim that WBR can be an excellent indicator of stellar surface gravity of late-type stars as well as a distance indicator. We have measured the width (W) of the Ca II K emission line in high resolution spectra of 125 late-type stars, which were obtained with Bohyunsan Optical Echelle Spectrograph (BOES) and adopted from the UVES archive. Based on our measurement of the emission line width (W), we have obtained a WBR of $M_V=33.76-18.00{\log}W$. In order to extend the WBR to be a surface gravity indicator, the stellar atmospheric parameters such as effective temperature ($T_{eff}$), surface gravity (logg), metallicity ([Fe/H]), and micro-turbulence (${\xi}_{tur}$) have been derived from the self-consistent detailed analysis using the Kurucz stellar atmospheric model and the abundance analysis code, MOOG. Using these stellar parameters and logW, we found that ${\log}g=-5.85\;{\log}W+9.97\;{\log}T_{eff}-23.48$ for late-type stars.

• Journal of the Korean Home Economics Association
• /
• v.32 no.2
• /
• pp.219-230
• /
• 1994

The purpose of this comparative research is to investigate the change of the drafting method of the basic patterns for women in Korea. Followings were the findings of this research: 1) The concept of the basic pattern could be found after the first of the 1950s and there was introduction of the many basic patterns. At first measurement couldn't be found. Gradually the personal body type could be expressed in the basic pattern through the practical measurements such as the width of highest bust level and the length of neck to bust. 2) Through the ages the changes of the basic patterns were between 1950,60s and 1980,90s distinctively at the back width back shoulder angle front and back shoulder height from biceps line back neck ratio(height/width) BP position at the biceps line the amounts of underarm dart underarm dart position from the biceps lines and front ease angle at BP line. 3) 4 Grouping the types of the basic pattern followings are their characters; 1st Munwha or Doreme style 2nd waist dart group 3rd underarm dart and rectangular front ease 4th the usage of many measurements like as front length upper bust girth etc.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.52.1-52.1
• /
• 2011

Black hole masses of Active Galactic Nuclei (AGN) are one of the most important parameters in AGN physics. Based on the virial assumption, black hole masses can be determined from the product of the width of the broad emission lines and the continuum/line luminosities. Using the Low Resolution Imaging Spectrometer(LRIS) at the Keck telescope, we obtained high quality spectra (S/N~100), covering 2300-5500A in the rest-frame, for a sample of 37 intermediate-luminosity AGN at z~0.4, in order to calibrate various black hole mass estimators based on the Mg II (2798A) and the Hbeta (4861A) emission lines. After subtracting continuum and complex FeII emission under Mg II and Hbeta, we fit the broad emission lines using high order Guass-Hermite models to best constrain the profile and the width of the emission lines. Combining the SDSS spectra covering Halpha emission line with the Keck spectra, we determine a set of 6 black hole masses for each object, based on the line width (MgII, Hbeta, and Halpha) and the luminosity (LMgII, LHbeta, LHalpha, L3000, L5100), and calibrate each black hole mass estimator. We will present uncertainties and limitations of each mass estimator.

• Journal of the Korean Home Economics Association
• /
• v.45 no.3
• /
• pp.23-31
• /
• 2007

This study was conducted to reproduce the four-piece bodice pattern of a ladies' costume of the 1890's for Korean women in their twenties with a standard body type and average size. Eighteen four-piece bodice patterns of the ladies' costume of the 1890's were collected and drawn to actual size. The front width of the bodice was wider than the back width. The front bust line of the bodice was wider than the sum of the back bust line, the side back bust line and the under-arm gore bust line. The front waist line of the bodice was wider than the sum of the back waist line, the side back waist line and the under-arm gore waist line. The angles of the two waist darts of the bodice were very big but the legs of the dart were too short. The center front line of the bodice was oblique and curved. The angle of the back shoulder line of the bodice was bigger than the angle of front shoulder line. The shoulder seam line of the bodice was not placed on the top of the shoulder but behind the shoulder. The pattern characteristics of the bodice created a woman's silhouette that emphasized the volume of the bust, a chicken breast and a slim waist. The study pattern which had the characteristics of the four-piece bodice of the 1890's was designed like for Korean women in their twenties who have a standard body type and an average size through modifications based on the evaluation of two dressing occasions. The study pattern was evaluated to have the silhouette of the 1890's and to fit Korean women.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1196-1204
• /
• 1999

adaption of the model predictions is highly desirable. In general, the width deviation at the head and tail ends of strip may be different from that of the steady state region. Therefore, the dynamic edger corrections can be used to compensate the width deviations which would otherwise occur. For the precise width control, the effect of edger roll gap and rolling conditions on the width deviation of head and tail ends of strip has been investigated and the effective method to decrease width deviation has been proposed. On-line application of dynamic edger control method in this study shows about 50% width compensation at the head end of the strip, and near perfect compensation at the tail end of strip.