• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.140-149
• /
• 1996

Cursive characters are written on an economical principle to reduce the motion of a pen in the limit of distinction between characters. That is, the pen is not lifted up to move for writing a next stroke, the pen is not moved at all, or connected two strokes chance their shapes to a similar and simple shape which is easy to be written. For these reasons, strokes and korean alphabets are not only easy to be changed, but also difficult to be splitted. In this paper, we propose a curvature stroke modeling method for splitting and matching by using a structural primitive. A curvature stroke is defined as a substroke which does not change its curvanture. Input strokes handwritten in a cursive style are splitted into a sequence of curvature strokes by segmenting the points which change the direction of rotation, which occur a sudden change of direction, and which occur an excessive rotation Each reference of korean alphabets is handwritten in a printed style and is saved as a sequence of curvature strikes which is generated by splitting process. And merging process is used to generate various sequences of curvature strikes for matching. Here, it is also considered that imaginary strokes can be written or omitted. By using a curvature stroke as a unit of recognition, redundant splitting points in input characters are effectively reduced and exact matching is possible by generating a reference curvature stroke, which consists of the parts of adjacent two korean alphasbets, even when the connecting points between korean alphabets are not splitted. The results showed 83.6% as recognition rate of the first candidate and 0.99sec./character (CPU clock:66MHz) as processing time.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.

• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.345-355
• /
• 1993

Anatomical study of the secondary xylem in Araliaceous plants, induding 7 genera and 11 species grown in Korea, was carried out to elucidate the relationship among genera in the family. Wood of Hedera has difbse porous and shows ulmiform pattern of angular vessels, simple perforation plate, and alternate pitting. In addition, its ray is homogeneous type II with only procumbent ray cell. Ring porous wood of Dendropanax shows ulmiform of angular vessels, simple perforation plate, alternate pitting, and heterogeneous type II ray, which has sometimes horizontal secretory cavity. Fatsia has diffuse porous wood, which shows ulmiform of angular vessels, scalariform perforation plate (3-9 bars), scalariform pitting, spiral thickening in the lateral wall of vessel, and heterogeneous type II ray with sheath cells. Kalopanax has ring porous wood, which shows ulmiform of circular vessels, simple perforation plate and alternate pitting, and heterogeneous type II ray. While K pictum appears tylose with septum, K pictum var. maximowczii appears tylose without septum. Echinopanax shows ring porous wood, ulmiform of angular vessels, simple perforation plate, scalariform pitting, and tylose with septum. And the ray of Echinopanax is paedomorphic type I composed of only upright cells. Acanthopanax genus is composed of diffuse porous wood, ulmiform of angular vessels, simple perforation plate and alternate pitting. In this genus, A. sessiliflorus has heterogeneous type II ray, apotracheal axial parenchyma and tylose with septum. A. senticosus appears paedomorphic type I with only upright cells, and tylose with septum. A. koreanum and A. sieboldianum have heterogeneous type II ray but have not tylose. Aralia is composed of ring porous wood, ulmiform of circular vessels, simple perforation plate, alternate pitting, heterogeneous type II ray, and tylose contained both septum and reticulate. On the basis of arrangement, shape, length and diameter of vessel element, the angle of end wall to vessel axis, and ray type, the line of specialization in these genera is as follow: from Fatsia, the most primitive, to the most highly specialized Aralia, throughout Hedera, Acanthopanax, Echinopanax, Dendropanax, and Kalopanax by turns. turns.

• Journal of The Korean Association of Information Education
• /
• v.5 no.1
• /
• pp.33-45
• /
• 2001

In order to adapt ourselves to the Informationalization Society of twenty-first century, it is required to have ability to find quickly the necessary information and solve the problem of our own. In the field of school, it should be educated to develop learner's ability that can cope with the Informationalization Society. When a learner can study in such direction, he or she will be able to plan the learning of his own as the subject of education, and develop his ability to solve the problem by collecting and examining various information. It is self-leading learning that can make education like this possible. Through computer, especially Web site, self-directed learning can develop can develop the individuality and creativity of learners. They can collect and utilize autonomously information and knowledge. To do such an education, the program that can work out self-directed learning is needed. Therefore the program I want to develop is to reconstruct the 'figure' part of mathematics in elementary school into five steps by utilizing Web site. In the first step is to learn the concept of various shape. This step enable learners to know what figure is and how it can be utilized in our real life. The second step of dot, line and angle makes it possible that learners can consolidate the foundation of the study about figure and recognize the relation between angle and figure. In the third step of plane figure, we can study how to calculate the relation of plane figures and the area of figure with various shapes by cutting and adding them. The fourth step is about congruence and symmetry. Learners can learn to know the figure in congruence, reduction and enlargement and how it is used in our real life. In the fifth step of solid figure, we can learn the relation among the plane figure, solid figure, the body of revolution, corn and pyramid etc. controling the speed of learning on the basis of his ability. In the process of the program, it is also possible to develop learner's ability of self-leading learning by solving the problem by himself. Because this program is progressed on the Web site, it is possible to learn anytime and anywhere. In addition to it, a learner can learn beyond the grade as well as do the perfect learning by controling the pace of learning on the basis of his ability. In the process of the program, it is also possible to develop learner's ability of self-leading learning by solving the problem by himself.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.375-383
• /
• 2009

This study was carried out to develop transgenic rice cultivars with the CAX1 (accession no. U57411) gene. We successfully selected the transgenic rice plants over-expressing the Arabidopsis H+/$Ca^{2+}$ antiporter CAX1 (accession no. U57411) gene in T6 generation. The brown rice of the CAX1 expressing rice contained 13.4~68.0 % more calcium $(Ca^{2+})$ than that of the wild type and 5 lines were selected based on the phenotypes compared to the control cultivar at the GMO field. The CAX1 expressing transgenic rice plants were similar in phenotype to the wild type during the whole growth period. Also these selected 4 lines appeared to be resistant to blast, cold and water solution compared with the wild type. Difference in 1,000 grain weight of brown rice was observed among each line but grain shape did not show any morphological alternations. These results suggest the enhanced Ca-substrate specificity of CAX1 exchanger in donor plant. Therefore, intact CAX1 exchanger can be functionally useful for $Ca^{2+}$ nutrient enrichment of rice with reduced accumulation of undesirable cation.

• Journal of Chest Surgery
• /
• v.36 no.10
• /
• pp.711-720
• /
• 2003

Bakground : Complete resection by the surgery has been selected as the treatment of choice in lung cancer patients, but in cases of recurrence after excision or inoperable cases, the importance of anticancer chemotherapy has been emphasized. If one can select a set of the sensitive chemotherapeutic agents before anticancer chemotherapy, it will give more favourable results. Subrenal capsular assay has been recognized as a useful in-vivo chemosensitivity test of thoracic and abdominal tumors and it can be done in a short time for a rapid interpretation of tumor responsiveness to anticancer chemotherapeutic drugs. It has been reported that various kinds of cancer cells can be implantable to the kidney, but so far there is no comparative study of xenogeneic cell implantation on liver, spleen and kidney. The author implanted the human lung cancer cells under the capsule of S.D rat's liver, spleen and kidney respectively and compared the pattern of growth and histology. Material and Method: After incubation of human lung cancer cell line (SW-900 G IV) in RPMI 1640 (Leibovitz L-15 medium) culture media, 3${\times}$3${\times}$3 mm size fibrin clots which contain 108 cancer cells were made. Thereafter the fibrin clots were implanted at subcapsule area of liver, spleen and kidney of S.D. female rat. For immune suppression, cyclosporin-A (80 mg/Kg) was injected subcutaneously daily from post-implantation first day to sixth day. The body weight was measured at pre and post implantation periods. The growth pattern and the size of tumor mass were observed and the pathologic examination and serum tumor marker tests were performed. Result: Body weight increased in both of control and experimental groups. Serum Cyfra 21-1 was not detected. Serum levels of CEA and NSE revealed no significant change. The SCC-Ag increased significantly in implanted group. The growth rate of human lung cancer cells which was implanted on spleen was higher than on liver or kidney. The surface area, thickness, and volume of tumor mass were predominant at spleen. The success rates of implantation were 80% on kidney, 76.7% on spleen and 43.3% on liver. Pathologic examination of implanted tumors showed characteristic findings according to different organs. Tumors that were implanted on kidney grew in a round shape, small and regular pattern. In the spleen, tumors grew well and microscopic neovascularization and tumor thrombi were also found, but the growth pattern was irregular representing frequent daughter mass. Human lung cancer cells that were implanted in the liver, invaded to the liver parenchyme, and had low success rate of implantation. Microscopically, coagulation necrosis and myxoid fibrous lesion were observed. Conclusion: The success rate of implantation was highest in the kidney. And the mass revealed regular growth that could be measured easily. The SCC-Ag was presented earlier than CEA or Cyfra21-1. The Cyfra21-1 was not detected at early time after implantation. The best model for tumor implantation experiment for chemosensitivity test was subrenal capsular analysis than liver and spleen and the useful serum tumor marker in early period of implantation was the SCC-Ag.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.780-783
• /
• 2012

A new strawberry cultivar (Fragaria ${\times}$ ananassa Duch.) 'Okmae' was developed from a cross between 'Toyonoka' and 'Maehyang'. This cultivar has a good fruit quality and suitable number of flowers per cluster for labor saving in fruit thinning. 'Gyoengnam No. 1' was selected as an elite line with vigorous plant growth, higher soluble solids content and fruit firmness after examining its characteristics and productivity in forcing cultures from 2007 to 2009. Farmer's field trial of 'Gyoengnam No. 1' was conducted in 2010 and it was registered as 'Okmae' thereafter. The general characteristics of 'Okmae' are vigorous growth habit, erect plant type, less number of leaf and elliptic leaf shape. 'Okmae' has long peduncle and 9-10 flowers per flower cluster which need less labor for fruit thinning. Fruits of 'Okmae' are conical having a bright red and glossy skin color. Although 'Okmae' has a smaller average fruit number per plant of 21.9 than that of the control cultivars, it's possible to produce high yield because of greater fruit weight of 26.0 g. 'Okmae' showed a high soluble solids content of $11.6^{\circ}Brix$, low acidity of 0.37%, and high firmness of $14.5g{\cdot}mm^{-2}$. It is sensitive to anthracnose and powery mildews, but high-quality strawberry can be harvested by using effective control measure.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.17-26
• /
• 2005

There are several problems in the commercial pound net in the heavy tide ; the breaking and loss of net, steeply variation of net shape and decreasing of fishing efficiency, etc. In order to solve these problems, we introduced method of added sinker used to coastal cultivating cage of Japan and investigated the possibility of application to the Korean pound net. The results are obtained as follows; 1. In case of the upperward flow with fish court net, tension of the frame line was increased about 10${\sim}$25% than that of prototype according to the added sinker from 1.3gf to 5.2gf. The tension of A-type and B-type was similar to the case of the prototype, the tension of C-type and D-type was increased about 10${\sim}$15% than that of prototype. 2. The variation of deformed angle of fish court net was from 0$^{\circ}$ to 70$^{\circ}$ and that of the slope net was from 0$^{\circ}$ to 64$^{\circ}$ and that of the second bag net was from 0$^{\circ}$ to 46$^{\circ}$ and the depth of the second bag net was increased about 10% when the added sinker was changed from 1.3gf to 5.2gf. The depth of the first bag net and the second bag net were decreased about 50% than that of initial depth. 3. For the deformed angle of fish court net according to the attached point of the added sinker, A-type and B-type were decreased about 25% and 10% than the prototype, respectively. C-type was similar to the case of the prototype and D-type was increased about 15% than that of the prototype. The depth of slope net became deep in turn of A-type, B-type, C-type and D-type. For the depth of the second bag net, A-type, B-type, C-type and D-type were increased about 10${\sim}$15% than that of prototype. The depth of the slope net was changed from 0$^{\circ}$ to 63$^{\circ}$ and that of the second bag net was changed from 0${\sim}$44$^{\circ}$ according to the increase of velocity. 4. The optimal weight of added sinker was about 2.6${\sim}$3.6gf and the optimal attached point of added sinker was the case of C-type and D-type.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.521-549
• /
• 2015

We recognize all objects by seeing. However, we are not sure that the things we see through our eyes are their essence. Here comes my question: What does it mean that humans see and recognize things? The things we see are images and so I consider recognizing an object as semiosis via our visual sensation and brain. That is because objects are defined not by their essence but as symbols we recognize. In the era of post-modernism art is a voluntary creative activity that creates a kind of spiritual value and plays an important role for appreciators who realize the fact to enjoy the life value. This paper focused on the art putting aesthetic value on humans' recognition and explored works of art in a visually perceptible way through semiosis. That is because art, an act of creating things, is symbolic and closely linked to semiotic system. Furthermore, derivative visual signs can be considered to be in line with the viewers' visual perception. If we interpreted by recognizing the works of art along with symbol, we can enjoy the works in depth through recognizing their color or shape. Therefore, I intended to discourse on color perception focusing on colors in order to analyze the relationship between art and symbol in the process of recognizing works of art. This paper looked into background of color recognition, status of colors and ways of expression for impressionist who painted with various colors and examined colors as a sensory language. In the process of interpreting art works by communication between the artist and viewers, the role of color is considered as visual symbol through the artist's experience, consciousness, emotions, and their senses. It can be interpreted the visual language through signification of the symbols when the colors are formed in works of art as a recognizable space. Therefore we expect to study in the Visual arts to be the colors symbolic analysis is extended to more effective communication tool.

• Journal of the Korean earth science society
• /
• v.41 no.1
• /
• pp.19-30
• /
• 2020

To understand the impact of typhoons on Gamji gravel beach Taejongdae in Busan, we carried out beach profiling using a VRS-GPS system and a Drone photogrammetry for the typhoons 'Kong-rey' invaded in October 2018 and 'Danas' in July 2019. In addition, grain sizes are analyzed to investigate the overall distribution pattern of gravels on the beach, and the beach topography is surveyed periodically to confirm the recovery rate of the beach. Grain-size analysis reveals that mean gravel sizes, in general, become finer from -6.2Φ to -5.4Φ towards the east in the seashore line direction. Variation in mean sizes is obviously observed in the cross-shore direction. Gravels in the swash zone are relatively fine about -4.5Φ in size and equant in shape, whereas the coarse and oblate gravels ranged from -5Φ to -6Φ are found in the berm. Gamji gravel beach particularly has two lines of berms: a lower berm situated facing beach and an upper berm about 10 m landward. After the typhoon Kong-rey passed by, about 1.4 m of severe erosion in upper berm occurred, and the berm eventually disappeared. On the backshore of the upper berm about 50 cm of erosion took place so that the elevation became lower. However, tangible erosion was not observed in the lower berm. When typhoon Danas hit, rated as mild storm, both upper and lower berm were eroded out. However, about 50 cm of deposition occurred only in the backshore. Only three days later, the new lower berm was formed, meaning that sedimentation rate must be high. This result indicates that Gamji gravel beach is recovered very fast from erosion caused by the typhoons when it is under the fair-weather condition even though beach morphology changes dramatically in a short period of time. Gravel beach is estimated to be or evaluated very resilient to typhoon erosion.