• 대한한방부인과학회지
• /
• 제22권3호
• /
• pp.117-134
• /
• 2009

Purpose: In the theory of traditional medicine, Scutellariae Radix (SR) can clear away heat and remove dampness, purge the sthenic fire and remove toxic materials, cool blood and stop bleeding to prevent miscarriage. Recently, SR is known to have anti-cancer activity. For this reason, the present author designed to investigate the effect of SR on proliferation rates of cervical cancer cell line, then effects on genetic profile by SR. Methods: The genetic profile for the effect of SR on human derived cervical cancer cell line, SNU-703, was measured using microarray technique, and the functional analysis on these genes was conducted. Results: Total 519 genes were up-regulated and 606 genes down-regulated in cells treated with SR. Genes induced or suppressed by SR were all mainly concerned with metabolic process, regulation of biological process and protein binding. The network of total protein interactions was measured using cytoscape program, and some key molecules, such as TNFRSF1A, AKT1, MAPK3, and STAT3 that can be used for elucidation of therapeutical mechanism of medicine in future were identified. Conclusion: These results suggest possibility of SR as anti-cancer drug and also suggest that related mechanisms are involved in TNFRSF1A, AKT1, MAPK3, and STAT3 related signalling pathways.

• 천문학회보
• /
• 제44권2호
• /
• pp.50.2-50.2
• /
• 2019

We present the results of high-resolution (R ≥ 30,000) optical and near-infrared spectroscopic monitoring observations of a FU Orionis-type object, 2MASS J06593158-0405277. We have monitored 2MASS J06593158-0405277 with the Bohyunsan Optical Echelle Spectrograph (BOES) and the Immersion GRating INfrared Spectrograph (IGRINS) since December 2014. Various features produced by wind, disk, and outflow/jet were detected. The wind features varied over time and disappeared about a year after the outburst occurred. The double-peaked line profiles were detected in the optical and near-infrared, and the line widths decrease with increasing wavelength. The disk features in the optical spectra are fit well with G2-type or G5-type stellar spectra convolved with a disk rotational profile of about 45 km s^-1, which corresponds to a disk radius of about 71 R_⊙for a central mass of 0.75 M_⊙. Disk features in near-infrared spectra are fit well with a K1-type stellar spectrum convolved with a disk rotational profile of about 35 km s^-1, which corresponds to a disk radius of about 117 R_⊙ for a central mass of 0.75 M_⊙. We also detected [S II] and H2 emission lines, which are rarely found in FUors but are usually found in the earlier stage of young stellar objects. Therefore, we suggest that 2MASS J06593158-0405277 is in the relatively earlier part of Class II stage.

• 천문학회보
• /
• 제45권1호
• /
• pp.61.4-62
• /
• 2020

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (~42.4" × 12") spatial; ~1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into kinematically cold, warm or hot ones with respect to their velocity dispersion: 1) cold: < 4 km/s, 2) warm: 4 ~ 8 km/s, 3) hot: > 8 km/s. We then derive the Toomre-Q parameters of NGC 6822 using the kinematically decomposed H I gas maps. We also correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The kinematically cold component is likely to better follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• 한국지구과학회지
• /
• 제38권4호
• /
• pp.263-268
• /
• 2017

한 개 측선에서 얻어진 중력 변화율 텐서 자료를 이용하여 주향과 경사를 가지는 선형 이상체의 위치를 결정하는 알고리즘을 제시하였다. 기존에 연구된 중력 변화율 텐서를 이용한 선형 이상체의 주향과 경사를 결정하는 방법을 발전시켜서, 선형 이상체의 주향과 경사를 결정한 이후 이상체의 위치를 결정하는 알고리즘을 개발하였다. 선형 이상체의 주향과 경사는 2차원 이상체로부터 얻어지는 중력 변화율 텐서가 회전 변환 후 2개의 독립 성분만을 가진다는 특징을 이용하여, 중력 변화율 텐서의 5개의 독립 성분을 2개의 독립 성분으로 축소시키는 회전 변환 각으로부터 선형 이상체의 주향과 경사를 결정한다. 이상체의 위치를 가리키는 방향 벡터는 중력 변화율 텐서의 회전변환 후 남은 2개 독립 성분의 비를 이용하여 유도하였다. 여러 측점에서 계산된 이상체를 가리키는 방향 벡터가 수렴하는 영역이 선형 이상체의 위치로 결정된다. 최소자승법을 이용하여 방향 벡터의 수렴 영역을 결정하는 알고리즘을 제시하였고, 수치모델링 자료를 통하여 유용성을 검토하였다.

• Wind and Structures
• /
• 제34권2호
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

• 지질공학
• /
• 제12권1호
• /
• pp.89-93
• /
• 2002

본 조사는 "○○항 건설공사 동방파제 지반조사"에서 기시공된 동방파제 구간 중 No.38+0단면과 No.40+0단면에 대해서 사석침하의 확인과 안정성을 검토할 목적으로 공대공 탄성파 토모그래피 탐사를 실시하였으며, 그리고 토모그래피 탐사에 의한 속도분포를 가지고 지반의 성층상태를 정량적으고 표현하였다 탄성파 토모그래피 탐사결과와 시추 결과를 종합분석하여 보면, 탄성파 속도 2100m/sec를 기준으로 투하된 사석층과 원지반 퇴적층이 명확히 구분된다. 설계시 설정한 침하예상선과 현재의 사석침하 상태는 다소 차이가 보이는 것으로 나타나며, 탄성파 토모그래피는 이러한 현재의 침하상태를 정량적으로 잘 표현해 주고 있다.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.95-105
• /
• 1996

Korea Gas Corporation has operated high pressure gas transmission line of about 600 kilometers and, therefore, a series of repair welding processes are required in order to cope with external defects such as dent, gouge, cracking usually due to mechanical attacks. Most of gas pipelines repair processes are performed after completely venting remaining gas. However, in some case, though it is very unusual, repairs require without venting gas. For instance, this case is that damaged pipeline is remedied with split sleeve by welding. In this paper, in an effort to confirm a safe application of the split sleeve welding, residual stress, strain and temperature distributions are evaluated by computer simulation and experiments. The results obtained are as follows : 1) Computer modelling is supposed to be reasonable because microstructure changes due to welding is simulated coincidently as compare to that of real condition. 2) The maximal temperature on inside surface of pipeline is 50$0^{\circ}C$ for the repair welding process. 3) The amount of residual stress is estimated as the stress corresponding to 0.8% strain. 4) The repair process employed is determined to be technically preferable because of its avoiding cracks and fractures in the course of welding.

• Molecular & Cellular Toxicology
• /
• 제1권1호
• /
• pp.52-61
• /
• 2005

Transcript profiling is a particularly valuable tool in the field of steroid receptor biology, as these receptors are ligand-activated transcription factors and therefore exert their initial effects through altering gene expression in responsive cells. Also, an awareness of endocrine disrupting chemicals (EDCs) and their potential screening methods to identify endocrine activity have been increased. Here we developed an in-house cDNA microarray, named KISTCHIP-400 ver. 1.0, with 416 clones, based on public database and research papers. These clones contained estrogen, androgen, thyroid hormone & receptors, sex hormone signal transduction & regulation, c-fos, c-myc, ps2 gene, metabolism related genes etc. Also, to validate the KISTCHIP-400 ver. 1.0, we investigated gene expression profiles with reference hormones, $10^{8}\;M\;17{\beta}-estradiol,\;10^{-7}\;M\;testosterone\;and\;10^{-7}\;M$ progesterone in MCF-7 cell line. As the results, gene expression profiles of three reference hormones were distinguished from each other with significant and identified 33 $17{\beta}-estradiol$ responsive genes. This study is in first step of validation for KISTCHIP-400 ver. 1.0, as following step transcriptional profile analysis on not only low concentrations of EDCs but suspected EDCs using KISTCHIP-400 ver. 1.0 is processing. Our results indicate that the developed microarray may be a useful laboratory tool for screening EDCs and elucidating endocrine disrupting mechanism.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.730-738
• /
• 2007

As well known when the linear machine is operated between two points repeatedly under positioning control, there are various positioning error at the moment of zero speed owing to the non-linear disturbance like as unpredictable friction force. To remove this positioning error, a simple least order disturbance observer is introduced and is actually implemented in this study. Due to this simple algorithm the over-all machine system can be modified to simple arbitrary given one-mass load without any disturbance. So, the total construction process for positioning control system is much easier than old one. Moreover, to generate a proper effective position profile with the limited actual machine force, a very powerful on-line mass identification algorithm using the load force estimator is presented. In the proposed mass identification algorithm, the exact load mass can be calculated during only one moving stage under a normally generated position profile. All presented algorithm is verified with experimental result with commercial linear servo machine system.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.908-912
• /
• 2014

Microgratings whose diffracted field at a fixed angle generate IR spectra of $SF_6$ or $NH_3$ were fabricated by MEMS techniques for the purpose of IR correlation spectroscopy. Each micrograting was composed of 1441 reflecting lines in the area of $19.2{\times}19.2mm^2$. The depth profile of the line elements was determined with a gradient searching method that was described in our previous publication (J. Mod. Opt. 2013, 60, 324-330), and was discretized into 16 levels between 0 and $6.90{\mu}m$. The diffraction field from a given depth profile was calculated with Fraunhofer equation. The fabricated microgratings showed errors in the depth and the width within acceptable ranges. As the result, the diffracted IR spectrum of each micrograting matched well with its target reference spectrum within spectral resolution of our optical setup.