• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.5
• /
• pp.400-404
• /
• 2004

Growth performances of the selected and the non-selected red sea bream (Pagrus major) lines were evaluated up to marketable size. The offspring were mass-produced either from the selected line (the fourth generation of broods from mass selection) or the non-selected line (the second generation of wild broods). Early (59 to 103 days old, trial I) and late growth performances (4 to 24 months old, trial II) were evaluated based on communal rearing in land-based tanks and sea cages, respectively. In trial I, the selected line exhibited significantly higher values in both weight gain (WG) and specific growth rate (SGR) when compared to those observed in the non-selected line (P<0.05). In trial II comprising of three growth phases (4-9, 9-16 and 16-24 months old), selected line showed only slightly improved in WG and SGR at the beginning two growth phases (4-9 and 9-16 months old) (P>0.05), however, displayed significantly higher values at the last growth phase (16-24 months old) (P<0.05). Overall WG and SGR throughout the experiment (4-24 months) were also significantly higher in the selected line than the non-selected line (P<0.05). Consequently, mean body weight of the selected line at 24 months old was 1.4-fold (40.8{\%}\;increased) as compared to that of the non-selected line. This present result indicates that mass selection of this species against the growth traits might be quite effective, and the present advance has important Implication in the productivity enhancement of red sea bream aquaculture.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1010-1026
• /
• 2004

The goal of product line engineering is to support the systematic development of a set of similar software systems by understanding and controlling their common and distinguishing characteristics. The product line engineering is a process that develops reusable core assets and develops a set of software-intensive systems from a common set of core assets in a prescribed way. Currently, many software development technologies are accomplished in context of product line. However, much of the product line engineering research have focused on the reuse of work products relating to the software's architecture, detail design, and code. The product lines fulfill the promise of tailor-made systems built specifically for the needs of particular customers or customer groups. In particular, commonality and variability play central roles in the all product line development processes. These must be treated already during the requirement analysis phase. Requirements in product line engineering are basis of software development just like as traditional system development engineering, and basis of deciding other core assets' property - commonalities and variabilities. However, it is difficult to elicit, analyze and manage correct requirements. Therefore, it is necessary to develop systematic methods which can develop and manage requirement as core asset, which can be stable in anticipative change and can be well adapted to unpredictable change. In this paper, we suggest a method of managing requirements as core asset in product line. Through this method, the reuse of domain requirements can be enhanced. As a result, the cost and time of software development can be reduced and the productivity can be increased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.531-534
• /
• 2005

This paper presents a new data line sharing technique for TFT-LCD panels. This technique reduces the number of data driver IC's to half by having two adjacent pixels share the same data line. This in turn doubles the number of gate lines, which are integrated directly on the glass substrate of amorphous silicon for further cost reduction and more compactness. The proposed technique with new pixel array structure was applied to 15.4 inch WXGA TFT-LCD panels and has proven that the number of driver IC's were halved with nearly 41% circuit cost reduction and 5.3% reduction in power consumption without degrading the image quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.964-973
• /
• 2008

In this study, a short-wavelength coplanar-type transmission line employing periodic ground structure (PGS) was developed for application to miniaturized on-chip passive component on Si Radio Frequency Integrated Circuit (RFIC). The transmission line employing PGS showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PGS structure was 57 % of the conventional coplanar-type transmission line on Si substrate. Using the theoretical analysis. basic characteristics of the transmission line employing PGS (e.g., bandwidth. loss, impedance, and resonance characteristics) were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components on silicon RFIC. According to the results. the bandwidth of the transmission line employing PGS was more than 895 GHz as long as T is less than 20${\mu}m$, and the resonance characteristic was observed in 1239 GHz, which indicates that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.79-87
• /
• 1999

As it is well appreciated plate forming by line heating takes an important role in ship production process. The paper deals with the development of line heating simulator which can produce the resultant deformation due to line heating in a few minute adn with which user can see the result graphically. For the present purpose mechanical modelling is adopted which can explicitly represent the physical resultant of line heating. In developing the present line heating simulator several program modules are integrated by adopting GUI concept such that the simulator can produce resultant deformation with keeping high accuracy. Application example is illustrated for the twisted shape surface which can be frequently seen in ship and offshore structures.

• IE interfaces
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2010

The purpose of this paper is to present the development processes of the assembly line tester of power transmission for lift truck. Because power transmission is most important part of lift truck, all assembled powertrain parts must be inspected for operational defects, pressures and RPM. Developed assembly line tester is designed to take about 25 minutes for inspecting each assembled power transmission and located it at the end of assembled line. The assembly line no-load tester consists of three parts: (1) the driving hardware part; for installing and operating the transmission. (2) control PCB part; send data from sensors to a computer and control driving part, (3) operation software of no-load tester; for an automatic inspection or manual inspection, for database management and printing transcripts.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.238-241
• /
• 2003

The purpose of this study is to improve the frequency response of the Line coupler for Power Line Communication. We separate transmission and reception line coupler and design the reception line coupler using GIC. It was found from the result that separation transmission and reception line coupler using GIC have the advantage of a design and high Q.

• International Journal of CAD/CAM
• /
• v.2 no.1
• /
• pp.23-28
• /
• 2002

This paper presents an efficient line-offset algorithm for general polygonal shapes with islands. A developed sweep-line algorithm (SL) is introduced to find all self-intersection points accurately and quickly. The previous work is limited to handle polygons that having no line-segments in parallel to sweep-line directions. The proposed algorithm has been implemented in Visual C++ and applied to offset point sequence curves, which contain several islands.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.83-88
• /
• 2010

A new live-line insulator tester was developed to detect faulty insulators in 154kV power transmission lines. This paper is the first part of the two-part paper and deals with its tester development. The developed tester has the following characteristics. First, it automates parts of the insulator inspection process by using a sensor and an actuator, and secondly, it sustains its weight by itself, not by a lineman. Finally, it measures the insulation resistance of an insulator together with its distribution voltage to provide more information for its analysis and diagnosis. These leads to the improvement of its operation efficiency, measurement reliability and usability. Its effectiveness was validated by live-line field tests in actual power lines.