• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.729-732
• /
• 2003

연구자 및 연구관리기관의 효율적인 연구업무를 지원하기 위해 국내의 많은 연구기관들이 시스템을 도입하여 운용하고 있다. 좀더 효율적인 연구 활동을 지원하고 연구과제의 관리 및 데이터의 공유, 검색, 저장을 위해 XML 기반의 연구과제 제안서 접수 시스템을 개발하였다. 개발된 연구과제제안서 접수시스템은 한글과 같은 워드프로세서로 작성된 문서를 접수 받아서 XML로 변환 후 데이터 베이스에 저장하는 시스템으로 연구과제 관리 업무의 효율성 및 문서관리, 검색, 저장을 용이하게 할 수 있다. 본 연구에서 개발된 시스템은 정부출연연구원 및 21세기 프론티어 사업단에 보급되어 현재 운용되고 있다.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.451-454
• /
• 1990

Room temperature cw operations of a standing wave and a unidirectional Ti:Sapphire laser pumped by a $Ar^+$ laser have been demonstrated in the same pumping cavity configuration. Laser emission at 790 nm was excited with all-line $Ar^+$ laser pump for both cavities. The maximum output power was found to be 600 mW in the standing wave cavity and 210 mW in the ring cavity. Values of (83 ${\pm}$ 10) % for the internal quantum efficiency and (3.0 ${\pm}$ 0.5) % for the round-trip cavity loss for standing wave cavity are obtained from the thresholds and slope efficiencies measured with 2.4 and 11.2 % optput couplers. The measured cavity-loss value at 790 nm gives a meterial figure of merit (FOM) to be 146. Unidirectional operation of the ring Ti:Sapphire laser will be discussed.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.107-115
• /
• 2017

As the industrial society develops, the management of the production line becomes more and more important. There are also diversifying Management methods by industry. In addition, National Competency Standards (NCS) have also been developed. As a result, It has been created standards for each job and provide education and training standards for industrial production management tasks. Customer satisfaction is an ever-growing concern of management throughout the world. In addition, Colleges are focusing on vocational education. Because of the opening of the education market, They are competing in various ways. And, To survive in this competition. They are making great efforts to improve the lecture satisfaction. If education is regarded as an industry, it can be classified as a representative service industry. Because it is formed as a perfect competition between colleges. And then in this paper, This will focus on the mechanical production Manager duties of industrial engineering department related NCS. This study also conducted empirical studies to analyze factors affecting the curriculum using the KANO analysis.

• Korea-Australia Rheology Journal
• /
• v.16 no.4
• /
• pp.169-173
• /
• 2004

The control of the rheological properties of a fluid during processing is important and can determine the efficiency of the production in addition to the performance of the final product. The vast majority of process fluids are viscoelastic, hence an instrument that measures both the viscous and elastic properties of the material during processing would be of great practical use. However, most in-line instruments commercially available to date are only capable of measuring viscosity at a single shear rate. An in-line rheometer that measures both the viscous and elastic properties of fluids over a wide range of shear rates simultaneously has been described in a previous publication (Glasscock et at., 2003) in which the results of measurements on flowing sunflower oil were presented. Before this instrument can be used in an industrial situation, it must be demonstrated that the generated results are the same as, or bear some fixed relationship to, the results obtained by conventional off-line rheometers. To this end, the present investigation describes the measurements of a standard reference fluid, polyisobutylene dissolved in 2,6,10,14-tetramethylpentadecane, labelled SRM2490 by the National Institute of Standards and Technology (NIST) in the USA. The results obtained using the in-line rheometer show remarkably good correlation for viscosity, using a modified Cox­Merz rule, with the results supplied with the reference material from NIST.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.727-732
• /
• 2017

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

• 한국가스학회:학술대회논문집
• /
• 2006.11a
• /
• pp.191-195
• /
• 2006

Because of the continuous growth of energy consumption and also the tendency to site gas pipeline and power line along the same route, the close proximity of power lines and buried metallic pipelines has become more and more frequent. The lightning strokes collected by an electric substation or power line tower might cause arcing through the soil to an adjacent gas pipeline. This paper gives the outline of the resistance coupling and the standards of distance between gas pipeline and tower ground.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.162-166
• /
• 2008

We are developing a sensitive gamma ray spectrometer based on superconducting transition edge sensors. The detector consists of a small piece of high purity Sn as an absorber and a Ti/Au bilayer as a temperature sensor. It is designed to measure the thermal signal caused by absorption of gamma rays. The mechanical support and the thermal contact between the absorber and the thermometer were made with Stycast epoxy. The bilayer was formed by e-beam evaporation and patterned by wet etching on top of a $SiN_X$ membrane. A sharp superconducting transition of the film was measured near 100 mK. When the film was biased to the edge of the transition, signals were observed due to single photon absorption emitted from an $^{241}Am$ source. The measured spectrum showed several characteristic peaks of the source including 59.5 keV gamma line. The full with at half maximum was about 900 eV for the 59.5 keV gamma line. The background was low enough to resolve low energy lines. Considerations to improve the energy resolution of the gamma ray spectrometer are also discussed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.125-133
• /
• 2004

In order to test reflecting the features of a development methodology and domain, it is required to tailor process standards and perform testing according to the tailored process. However, since commercial testing tools support only a part of the tailored process, it is essential to either acquire or develop testing tools appropriate for a development environment. This paper proposes a method to develop a test process execution tool which has common features of standards, and variousness in methodologies and domains. ‘Test Process Execution Tool: Test PET’ which is a test process execution tool developed adapting the concept of product line. Our Test PET generates the test process suitable for the development methodology and domain and then executes the produced test process.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.7-12
• /
• 2005

We have observed the nonlinear magneto-optic effect(NMOE) based on atomic coherence in $^{87}$ Rb D$_1$-line using the Rb vapor cell containing 50 Torr of Ne. The width of the NMOE signal was measured to be 2$\pi$${\times}$464 Hz, when the peak-to-peak B-field variation was 1 mGauss. The result of this work may be applied to a high-sensitivity magnetometer.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.50-55
• /
• 2007

We have installed a 61-channel magnetocardiography (MCG) system inside a magnetically shielded room (MSR) with a size of $2.4\;m\;{\times}2.4\;m\;{\times}2.4\;m$. The MCG system consists of 1st-order axial gradiometers containing double relaxation oscillation SQUIDs (DROSs) with pick-up coils of a base line of 70 mm. The MSR holds a shielding factor of 50 at 0.1 Hz and 10000 at 100 Hz, when its door in the middle on a front wall is closed. On opening the MSR door, we have obtained the characteristics of the MCG system with a 2.9 Hz noise generated from an air conditioning unit at 13 m distance off the MSR. In an open-door MSR ($140^{\circ}$ opening), a noise at the center channel increases up to $700\;fT/Hz^{l/2}$ at 2.9 Hz and $1.7\;pT/Hz^{1/2}$ at 60 Hz. MCG signals for a healthy human do not show distortion until the door opens to $45^{\circ}$, but show the effect of noise when the door opens further at $90^{\circ}$ and $140^{\circ}$. With the door opens to $45^{\circ}$, MCG measurement can be performed with ease of door operation and without creating claustrophobia for the patient.