• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.281-285
• /
• 2017

We present a summary of our spectroscopic redshift catalogue of 404 sources in the AKARI Deep Field South (ADF-S). We have used the AAOmega spectrograph to target mid-infrared and far-infrared sources selected primarily from AKARI observations in this field for which we were able to obtain optical counterparts. Our sources with identified redshifts include 316 with $H{\alpha}$ detections at $z{\leq}0.345$ and 15 sources at z > 1 with MgII or $Ly{\alpha}$ emission lines. About 13% of our $z{\leq}0.345$ sources are dominated by active galactic nuclei (AGN) emission, although many show emission from both star formation and AGNs. The median Balmer decrement is 5.9. Ultra-luminous infrared galaxies (ULIRGs) were found only in the higher-redshift sources. Optical and near infrared data will be available shortly, enabling calibration of the line luminosities and spectral energy distribution (SED) fitting for these sources.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.20.1-20.1
• /
• 2011

We present the results of far-ultraviolet (FUV) observations of comet C/2001 Q4 (NEAT) obtained with Far-ultraviolet Imaging Spectrograph (FIMS) on board the Korean microsatellite STSAT-1, which operated at an altitude of 700 km in a sun-synchronous orbit. FIMS is a dual-channel imaging spectrograph (S channel 900-1150 ${\AA}$, L channel 1350-1750 ${\AA}$, ${\lambda}/{\Box}{\lambda}$ ~ 550) with large image fields of view (S: $4^{\circ}.0{\times}4'.6$, L: $7^{\circ}.5{\times}4'.3$, angular resolution 5'-10') optimized for the observation of diffuse emission of astrophysical radiation. Comet C/2001 Q4 (NEAT) was observed with a scanning survey mode when it was located around the perihelion between 8 and 15 May 2004. Several important emission lines were detected including S I (1425, 1474 ${\AA}$), C I (1561, 1657 ${\AA}$) and several emission lines of CO $A1{\cap}-X1{\sum}+$ system in the L channel. We estimated QCO = ($2.58\;{\pm}\;0.64)\;{\times}\;1028$ s-1 from the production rate of CO 1510 ${\AA}$. We obtained L-channel image which have map size of $5^{\circ}{\times}5^{\circ}$. The image was constructed for the wavelength band of L-channel (1350-1750 ${\AA}$).We also obtained radial profile of S I, C I, CO with line fitting from central coma.

• The KIPS Transactions:PartB
• /
• v.12B no.1 s.97
• /
• pp.17-24
• /
• 2005

In this paper, we will show that a control search methodology is a alternative method of a sequential search which is difficult in finding books for arrangement at library or a bookstore when books are out of place. To solve the problem of the sequential search, we apply a edge operator and the Hough Transform to boundary of a taken photograph image book. We generate histogram by a projected image from boundary range of selected books and select title areas from this and possible areas which are a character number of title, authors, a publishing company and an array sequence. Finally, we can select the final possible area of a book location by a curve fitting and a regression line extraction, and show utility through experiment.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.44-50
• /
• 2010

This study is devoted to understand the basic characteristics of the flowfield around a train in evacuated tube and to suggest an efficient numerical method to calculate the flowfield. To get steady-state solution in minimum calculation domain, various boundary condition have been tried for steady calculation and have been compared to the solution of unsteady calculation. At the train velocity of 300km/h, the aerodynamic drag results of both calculation method agreed very well. The drag ratio between on the open filed and in the tube from the calculation result by the suggested numerical method lied in the same fitting curve with that from the filed test of high-speed trains running in the line.

• Journal of Chest Surgery
• /
• v.45 no.6
• /
• pp.396-400
• /
• 2012

Background: Surgery has been the classical treatment of pectus carinatum (PC), though compressive orthotic braces have shown successful results in recent years. We propose a non-operative approach using a lightweight, patient-controlled dynamic chest-bracing device. Materials and Methods: Eighteen patients with PC were treated between July 2008 and June 2009. The treatment involved fitting of the brace, which was worn for at least 20 hours per day for 6 months. Their degree of satisfaction (1, no correction; 4, remarkable correction) was measured at 12 months after the initiation of the treatment. Results: Thirteen (72.2%) patients completed the treatment (mean time, $4.9{\pm}1.4$ months). In patients who completed the treatment, the mean overall satisfaction score was $3.73{\pm}0.39$. The mean satisfaction score was 4, and there was no recurrence of pectus carinatum in patients who underwent the treatment for at least 6 months. Minimal recurrence of pectus carinatum after removal of the compressive brace occurred in 5 (38.5%) patients who stopped wearing the compressive brace at 4 months. Conclusion: Compressive bracing results in a significant improvement in PC appearance in patients with an immature skeleton. However, patient compliance and diligent follow-up appear to be paramount for the success of this method of treatment. We currently offer this approach as a first-line treatment for PC.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.02a
• /
• pp.43-43
• /
• 1994

We studied chemical reactio of Eu metal on the in situ cleaved CdTe(110) surface by pphotoemission sppectroscoppy using synchrotron radiation. The chamber was maintained with base ppressure $\leq$2${\times}$10-10 mb during the expperiment. The expperiment was carried out in pphoton Factory in Jappan. Core level pphotoemission sppectroscoppy was carried out with Al K${\alpha}$ Line. The CdTe simiconductor was determined to be pp-typpe with low dopping concentration from Hall measurement. We found that there are two reacted pphases of Te with Eu (related to divalent Eu and trivalent Eu, resppectively) from least square fitting of Te 4d sppectra, but three is no indication of Cd reaction. Trivalent Eu exists after roughly one monolayer depposition (600 sec. depposition time is considered as one monolayer), which is also observed at Eu 3d core level sppectra. Overlayer Eu is metallized after roughly 2 monolayers depposition, as can be deduced from the fact that metallic edge near Fermi level begins to appear. The intensity of core-level of Te decreases expponentially at the initial stage (near one monolayer) and after one monolayer depposition it decreases more slowly due to Te out-diffusion. We categorized the growth mode of Eu on CdTe as S-K growth mode (cluster formation after one monolayer deppisition) from the relative intensity pplot of Te 4d normalized to the cleaved surface. At cleaved surface band bending is already established due to surface defects. At first 100 sec. depposition time the shift toward lower binding side by 0.6 eV is found at all core level sppectra of all elements in semiconductor. This shift is considered as the re-adjustment of surface Fermi level to the pposition induced by Eu metal (0.2 eV above the valence band maximum).

• Corrosion Science and Technology
• /
• v.16 no.3
• /
• pp.100-108
• /
• 2017

In this investigation corrosion behavior of newly developed high-pressure die cast Al-Ni (N15) and Al-Ni-Ca (NX1503) alloys was studied in 3.5% NaCl solution. The electrochemical corrosion behavior was evaluated using open circuit potential (OCP) measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization results validated that NX1503 alloy exhibited lower corrosion current density ($i_{corr}$) value ($5.969{\mu}A/cm^2$) compared to N15 ($7.387{\mu}A/cm^2$). EIS-Bode plots revealed a higher impedance (${\mid}Z{\mid}$) value and maximum phase angle value for NX1503 than N15 alloy. Equivalent circuit curve fitting analysis revealed that surface layer ($R_1$) and charge transfer resistance ($R_{ct}$) values of NX1503 alloy was higher compared to N15 alloy. Immersion corrosion studies were also conducted for alloys using fishing line specimen arrangement to simultaneously measure corrosion rates from weight loss ($P_W$) and hydrogen volume ($P_H$) after 72 hours and NX1503 alloy had lower corrosion rate compared to N15 alloy. The addition of Ca to N15 alloy significantly reduced the Al3Ni intermetallic phase and further grain refinement may be attributed for reduction in the corrosion rate.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.157-176
• /
• 1995

The purpose of this treatise is to study external form and internal meaning of minimal expression fashion which appeared as a major stream in modern fashion trends to understand one aspect of modernism in fashion and also to gain insight into internal value of human beings through fashion. The results can be summarized as follows : Firstly , minimalism is a trend in art attempting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means and minimal production process. Secondly, minimal expression in fashion means seeking simplicity an dpurity by using minimum design elements and minimal productive process. Thirdly, external from of minimal expression fashion can be created through application of following minimal expression techniques. 1. Minimal expression techniques in terms of line mean smooth curve flowing along body contours, straight lines of diagonal lines into desciplined silhouette or rendering internal contour lines. 2. Minimum expression techniques in terms of forms mean forms of smooth curves flowing along boyd or forms with simple geometric forms from qualitative aspects, In terms of volume it means quest for essence of pure body itself by revealing body as it is by minimizing the size of dress or its area and herein is contained using simple geometric pattern or utilizing textiles without any patterns.3. Minimal expression techniques by colors mean simple colors such as primary colors, colors without clear distinctions or natural colors and in terms of quantity it means quest for one color within one item of dress or combination of each items when getting dressed. 4. Minimal expression techniques in terms of fabrics mean fabrics with simple surfaced. In terms of quantity it means quest for essence of tight fitting thin textiles to human body or using transparent materials to human body thus exposing body contours as it is. 5. Minimal expression techniques in terms of productive process mean minimizing process of tailoring , sewing or ornamenting and seeking for simplicity and purity. 6. Minimal expression techniques in terms of manufacturing process mean selection of technique conveying simple image with disciplined simple image. Fourthly, minimal expression fashion with external expression as mentioned in the above lay body-priority style and its internal meaning can be asummed as quest for essence and purity of human body.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.145-155
• /
• 2002

In order to investigate how upper limb motion gives influence on clothing, this study measured tests by following standards: Front Vertical motion, Side-Vertical motion, and Horizontal motion. For this study, the procedures in the order of alphabet are applied. A. Eeach of testee's pattern was copied by the motion with a method of tight fitting technique. B. Analyzing each of the size-change on measuring item. C. Studying the moving aspects at each datum points. The results shows that the biggest change can be found in the following items. 1) In vertical motion of F4 (the length to shoulder point from A-point) 2) In horizontal motion of F5 (the length to front-width point from A-point), the check-result gained by checking the notice between motions shows that the most noticeable items are F4 (the length to shoulder point from A-point), F5 (the length to front-width point from A-point), F6 (the length to armpit point from A-point), B7 (the length to side-waist point from B-point). In result of the study of datum point's movement by motion, the items which were measured with the longest on straight-distance in vertical motion are the front and rear-shoulder, and the rear-shoulder, front-armpit in horizontal motion each. In the movement of each datum points by length, the check-result gained by checking the notice between motions shows that the most remarkable item is the front-shoulder.

• Journal of the Korean Society of Costume
• /
• v.53 no.5
• /
• pp.79-95
• /
• 2003

The purpose of this study is firstly to survey the social and cultural background of 20th century and women´s status, and to identify what the ideal body is like and what the elements of outer garment and underwear are and the techniques to incarnate the ideal beauty. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. In 1960´s, ideal beauty was small bust, long legs, which showed extremely slim Mini-skirt look. Thinly or no padded brassiere were worn for small bust, and pants-style short panty girdles were popular as they used to wear pants frequently. Lycra replaced all the closures, bones, seams and gave freedom with light weight. In 1970´s, a natural human body without sex specific was in vogue. Therefore, the non-structural knits without a pad or lining or the shirts dress were widespread for a Natural look and the naturally molded brassiere or girdles were worn as the underwears. In 1980´s, the women with powerful muscle appear which emphasized liveliness and healthfulness. The body conscious represented by wide shoulder, plump breast, accented waist, small hips, and long legs has been embodied. Outer garments emphasized women power and healthy beauty with Power suit and Form-fitting style, and underwears made the breast plump with padded brassiere and emphasized waist and hips with waspie. In 1990´s, ideal beauty was slim body with big bust and the outer garments emphasized body line of women with Hourglass silhouette. Push-up bra which emphasizes the valley of breast and supports the breast upward and the control tights for slim waist, flat abdomen, small hips, and long and slim legs have been useful as underwears. Multi-functional micro-fiber has been ideal for sculpting women body.