• Fibers and Polymers
• /
• v.2 no.1
• /
• pp.140-143
• /
• 2001

To better understand the formation of necking in drawing processes of fibers, strain distributions during drawing processes have been analyzed. For simplicity, one-dimensional incompressible steady flow at a constant temperature was assumed and quasi-static model was used. To describe mechanical properties of solid polymers, non-linear visco-plastic material properties were assumed using the power law type hardening and rate-sensitive equation. The effects of various parameters on the neck formation were matematically analyzed. As material property parameters, strain-hardening parameter, visco-elastic coefficient and strain-rate sensitivity were considered and, for process parameters, the drawing ratio and the process length were considered. It was found that rate-insensitive materials do not reach a steady flow state and the rate-sensitivity plays a key role to have a steady flow. Also, the neck formation is mainly affected by material properties, especially for the quasi-static model. If the process length changes, the strain distribution was found to be proportionally re-distributed along the process line by the factor of the total length change.

• Transactions of Materials Processing
• /
• v.23 no.6
• /
• pp.351-356
• /
• 2014

The current study aims to predict the forming limits considering the deformation characteristics of tailor rolled blank(TRB) during hot stamping. The formability of TRB is affected by the TRB line orientation because elongations change due to the intrinsic geometry within the sheet. To evaluate the forming limits, Nakazima tests were conducted at elevated temperatures with different TRB line orientations. Forming limit diagrams(FLD) of TRB can be predicted by an interpolating equation based on the Nakazima test. Predicted FLDs were used in FE-simulations of a rectangular drawing. The predicted limit drawing height was compared with experimental results. The simulation results show good agreement with the experimental ones with an error range of 3%.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.241-249
• /
• 2002

Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super precision technology in sub-micron units is required for optical axis adjustment. We developed the automatic optical fiber by image processing and automatic loading system. we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10{\mu}m$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up and fiber input array and waveguide chip formed in line by automatic.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.720-725
• /
• 1991

This paper is concerned with the program of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical - line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. And the new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in general. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptable elements for the given boundaries. The results of automatic mesh generation can be verified directly by drawing on the computer monitor in executing the program. And it is possible to add the processes - that is, editing, hard copying, etc - using the script file in Auto-CAD.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.55-58
• /
• 1997

In automotive industries, stamping of laser-welded blank gives many merits which brings about dimensional accuracy, strong body assembly and high productivity. However the welding of blanks with different thickness or/and different strength materials introduces many challenging formability problems for process development and tool design. In this paper, the deformation characteristics for deep drawing process of laser-welded blank with different thickness sheets are investigated by experiment and FEM simulation. And also the optimal location of weld line in laser-welded blank with different thickness sheets is calculated to compensate for the movement of weld line on deep drawing process. In addition, the effect of location of weld line is clarified using FEM simulation.

• Korean Journal of Child Studies
• /
• v.26 no.5
• /
• pp.233-244
• /
• 2005

This study examined the effect of visual art appreciation integrated with expression(integrated art appreciation) upon young children's drawing expression. The pretest-posttest control group design was chosen for the study. Twenty kindergarten children assigned to the experimental group were exposed to a program of integrated appreciation activity for 10 sessions. Another group of 20 kindergarten children were assigned to the control group taught by the traditional art teaching methods. Analysis of Covariance was applied for data analysis. Children in the experimental group showed higher scores in such drawing expressions as line, color, shape, composition, and theme.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.151-155
• /
• 2001

The purpose of this study is to investigate the weldline movement of the laser welded sheets during the warm deep drawing process. For this investigation, Five steps of temperature ranges, from room temperature to $200^{\circ}C$, and two kinds of thickness combination, 0.8 mm${\times}$1.2 mm and 0.8 mm${\times}$1.6 mm SCP1 material sheets, were adopted. Also, the numerical analysis using the PAM-STAMP has been carried out with the same models as the specimens. As a result the higher temperature was adopted, the less weld-line movement was observed.

• Journal of Advanced Technology Convergence
• /
• v.3 no.3
• /
• pp.29-35
• /
• 2024

When we look at the history of lines, we see that with the beginning of human civilization, lines were engraved on cave walls or rock surfaces for religious, shamanistic meanings, or to leave records. As time passed, characters were invented, which were used as a means of expression and recording, and had a significant impact on painting. In the East, according to the philosophy of 'Wu Wei Zi Ran (無爲自然)', artists borrowed from nature to express their intentions on the canvas with lines, and sometimes wrote their impressions on the canvas before or after painting. Lines were regarded not just as simple boundaries but as manifestations of the energy that evokes the vitality of the subject. Drawing a single line was considered the first act of life newly born in the cosmic space. The line itself implies the depth of space and elements of expression. Many artists have developed lines using contemporary senses and materials based on theories found in literature. This study aims to research the concept of lines and the linear characteristics of the East and West through recorded literature and data, and to study works using the overlapping nature of lines as a modern expression method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.151-157
• /
• 1990

This paper presents a method for rapid wire frame drawing of the 3D objects represented by the CSG scheme. When the two CSG trees are combined into one, the intersection parts of the polygons constituting the object corresponds to each subtree are computed, and the boundary representation of the combined object is obtained according to the given combinational operator and stored in the root node. The boundary representation in the root node is used in the wireframe drawing of the object and later computation of boundary representation. Bezier surface is taken as one of the primitive object the scan-line algorithm is used, which subdivides each scan-line into the spans where no polygon is intersected, and renders each span with the CSG representation of the object.

• Smart Media Journal
• /
• v.10 no.2
• /
• pp.30-37
• /
• 2021

Recently, 3D contents used in various fields have been attracting people's attention due to the development of virtual reality and augmented reality technology. In order to produce 3D contents, it is necessary to model the objects as vertices. However, high-quality modeling is time-consuming and costly. In order to convert a 2D character into a 3D model, it is necessary to express it as line drawings through feature line extraction. The extraction of consistent line drawings from 2D cartoon cartoons is difficult because the styles and techniques differ depending on the designer who produces them. Therefore, it is necessary to extract the line drawings that show the geometrical characteristics well in 2D cartoon shapes of various styles. This study proposes a method of automatically extracting line drawings. The 2D Cartoon shading image and line drawings are learned by using adversarial network model, which is artificial intelligence technology and outputs 2D cartoon artwork of various styles. Experimental results show the proposed method in this research can be obtained as a result of the line drawings representing the geometric characteristics when a 2D cartoon painting as input.