• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.39-46
• /
• 2009

Many lip region detection methods have been developed in PC environment. But the existing methods are difficult to run on real-time in resource limited mobile devices. To solve the problem, this paper proposes a real-time lip region detection method for lipreading in Mobile device. It detects face region by using adaptive face color information. After that, it detects lip region by using geometrical relation between eyes and lips. The proposed method is implemented in a smart phone with Intel PXA 270 embedded processor and 386MB memory. Experimental results show that the proposed method runs at the speed 9.5 frame/see and the correct detection rate was 98.8% for 574 images.

• Journal of the Korean Society of Safety
• /
• v.38 no.5
• /
• pp.43-50
• /
• 2023

With the advent of industrialization, consumers and end-users demand more reliable products. Meeting these demands requires a comprehensive approach, involving tasks such as market information collection, planning, reliable raw material procurement, accurate reliability design, and prediction, including various reliability tests. Moreover, this encompasses aspects like reliability management during manufacturing, operational maintenance, and systematic failure information collection, interpretation, and feedback. Improving product reliability requires prioritizing it from the initial development stage. Failure mode and effect analysis (FMEA) is a widely used method to increase product reliability. In this study, we reanalyzed using the FMEA method and proposed an improved method. Domestic railways lack an accurate measurement method or system for maintenance, so maintenance decisions rely on the opinions of experienced personnel, based on their experience with past faults. However, the current selection method is flawed as it relies on human experience and memory capacity, which are limited and ineffective. Therefore, in this study, we further specify qualitative contents to systematically accumulate failure modes based on the Failure Modes Table and create a standardized form based on the Master FMEA form to newly systematize it.

• Imaging Science in Dentistry
• /
• v.53 no.4
• /
• pp.283-289
• /
• 2023

The apnea-hypopnea index is widely regarded as a measure of the severity of obstructive sleep apnea (OSA), a condition characterized by recurrent episodes of apnea or hypopnea during sleep that induce airway collapse. OSA is a catastrophic problem due to the wide range of health issues it can cause, including cardiovascular disease and memory loss. This review was conducted to clarify the roles of various imaging modalities, particularly cone-beam computed tomography (CBCT), in the diagnosis of and preoperative planning for OSA. Unfortunately, 2-dimensional imaging techniques yield insufficient data for a comprehensive diagnosis, given the complex anatomy of the airway. Three-dimensional (3D) imaging is favored as it more accurately represents the patient's airway structure. Although computed tomography and magnetic resonance imaging can depict the actual 3D airway architecture, their use is limited by factors such as high radiation dose and noise associated with the scans. This review indicates that CBCT is a low-radiation imaging technique that can be used to incidentally identify patients with OSA, thereby facilitating early referral and ultimately enhancing the accuracy of surgical outcome predictions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.9
• /
• pp.2764-2781
• /
• 2024

Federated learning (FL) has been proposed as an emerging distributed machine learning framework, which lowers the risk of privacy leakage by training models without uploading original data. Therefore, it has been widely utilized in the Industrial Internet of Things (IIoT). Despite this, FL still faces challenges including the non-independent identically distributed (Non-IID) data and heterogeneity of devices, which may cause difficulties in model convergence. To address these issues, a local surrogate function is initially constructed for each device to ensure a smooth decline in global loss. Subsequently, aiming to minimize the system energy consumption, an FL approach for joint CPU frequency control and bandwidth allocation, called FCBAFL is proposed. Specifically, the maximum delay of a single round is first treated as a uniform delay constraint, and a limited-memory Broyden-Fletcher-Goldfarb-Shanno bounded (L-BFGS-B) algorithm is employed to find the optimal bandwidth allocation with a fixed CPU frequency. Following that, the result is utilized to derive the optimal CPU frequency. Numerical simulation results show that the proposed FCBAFL algorithm exhibits more excellent convergence compared with baseline algorithm, and outperforms other schemes in declining the energy consumption.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.927-930
• /
• 2007

As RFID systems are applied to various fields and applications such as supply chain management, asset management, location based applications etc. the requirements becomes diverse. For example, Much higher performance, TCP/IP protocol stack are required in some applications. However, low end processors based systems such as 8051 processor can not meet such requirements due to their low processing capacity and limited size of memory. In this paper a UHF band RFID system which meets the ISO 18000-6 TYPE C specification with ARM920T-based processor is implemented and tested.

• 한국노년학
• /
• v.38 no.1
• /
• pp.83-102
• /
• 2018

According to socioemotional selectivity theory, if people perceive their time left in life as expanded, they have a future-oriented goal of life, but if perceive as limited the goal of life is changed into the pursuit of present emotional satisfaction. Thus, if we perceive our time left as getting limited as we get older, we pay more attention to the positive stimuli than the negative ones and remember more the positive stimuli in order to maintain the current emotional state as positive. This is known as the positivity effect. This study examined whether the positivity effect is caused by a limited future time perspective. The participants were presented with scenarios for hypothetical situations in which the future time was expanded or limited, and were encouraged to immerse in the virtual situation by talking about what they would like to do and whom they wanted to spend time with. Then the participants were presented with 48 positive, negative, and neutral emotional pictures and were asked to recall after 10 minutes delay. 75 university students and 65 elderly participated in the study. In the control condition where the future time perspective was not manipulated, the elderly showed the positivity effect but the youth showed the bias toward negative pictures. The elderly in the expanded time condition recalled positive pictures less and negative pictures more than the elderly in the control condition. On the other hand, the youth in the limited time condition recalled less the negative pictures than the youth in the control condition. These results demonstrated that the elderly did not show the positive bias when the future time perspective was expanded, and that the youth showed the positive bias when the future time perspective was limited. These results show that the positivity effect is related with the limited future time perspective.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Issues in Feminism
• /
• v.18 no.2
• /
• pp.149-206
• /
• 2018

This essay is focused on finding women's voice in oral narratives of social memory of national violence and resistance. The books of oral narratives of women who had experienced the national violence and participated in the resistance through historic events such as 5.18, have been published recently. This study is based on the materials that have interviewed women experienced the historic event '5.18' in Gwangju. In this study, there are analyses of the materials of the memory of violence and resistance of '5.18', which have contained the texts written by intellectual males and the oral narratives of females directly involved. So far, the memory and experience of women have not been presented in its entirety in the field of social discourse of '5.18'. In the field women's words were translated in men's words, so the real words disappeared and in the end remained unspoken words. And besides, the existence of women are substituted with the limited images (for example women's body destroyed) presented by men's words in memorial materials. In narratives of '5.18', women are reduced to the images of bodies destroyed by national violence. The destroyed bodies are places for exhibition and disclosure of national violence. Women are not presented as the subjects of the social resistance in oral or written narratives of '5.18'. The images of females are only vehicles to urge the male subjects to resist against unjust violence. In this context, men are interpreted for the protectors of sisters, daughters, wives. Since 1980s, the symbol of '5.18 Gwangju' has represented the most ideal community in Korean society. But women have been on the borderline or outside of the community in fact. However, women intend to construct themselves as the subjects of resistance through the spoken words. They have tried to make the politic places for themselves in the social field by speaking and speaking constantly. The desire to speak out is becoming stronger for women, so these days more words are spoken by more women and more oral narratives made by women are revealed in social discoursive field. So the place for women's voice is expanding in social memorial field of '5.18'.

• Cartoon and Animation Studies
• /
• s.13
• /
• pp.255-267
• /
• 2008

Recently in the field of information design use of multimedia Including animation has been rapidly increased. And its application is expanding in the field of design nevertheless relevant research in this field is scant. In particular research on which characteristics contribute to improvement for effect of information communication is negligible. Until now designers' interest was mainly focused on visual perfection of screen such as diversity and originality. Actually the aspect of recognition of design was mostly overlooked. But considering ultimate purpose of Information design is accurate communication of information thus there should be more endeavor for research on man's visual recognitive faculty and memory in order to Improve power of communication of information for the purpose of reducing confusion of user before its originality and diversity. For this reason this author in this treatise attempted to examine possible impact of multimedia in information design on recognition of user and communication based on theory of effectiveness of media and also attempted to identify how maximize its effect under different circumstances. Theories on effectiveness of media can be summed up as that well- advanced information of multimedia should be analysed from diverse standpoints on relevancy to tasks and recognitive relevancy rather than its simplification from the standpoint of richness of media. For optimal interface design unnecessary recognitive load should be eliminated and information should be structured by laking maximum advantage of working memory of limited quantity. Also there will be need for selection of proper media and suggestion of expressive method to enable building accurate and successful mental image. In this treatise this author attempted to contribute to designer's decision making in future through examining theories on effectiveness of media in connection with the question of which information technology should be used in order to heighten effect of information communication appropriate to information design.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.407-415
• /
• 2007

In parallel cluster computing systems, the efficiency of communication between computing nodes is one of important factors that decide overall system performance. Accordingly, many researchers have studied on high-performance inter-node communication. The recently launched multi-core processor, however. increases the importance of intra-node communication as well because the more the number of cores in a node, the more the number of parallel processes running in the same node. Though there have been studies on intra-node communications, these have limited considerations on the state-of-the-art systems. In this paper, we propose a Linux kernel module that minimizes the number of data copy by exploiting the memory mapping mechanism for high-performance intra-node communication. The proposed kernel module supports the Linux kernel version 2.6. The performance measurements over a multi-core system present that the proposed kernel module can achieve lower latency up to 62% and higher throughput up to 144% than an existing kernel module approach. In addition, the measurements reveal that the performance of intra-node communication can vary significantly based on whether the cores that run the communication processes are belong to the same processor package (i.e., sharing the L2 cache).