• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.29-35
• /
• 2008

Very efficient 6-ary runlength-limited codes for a six-level optical recording channel are presented when d = 3. The 6-ary(3, 15) code of rate 6/7 is given achieving coding efficiency of 98.87%. The efficiency of rate 13/15, (3, 20) code is 99.95%, which approaches the Shannon capacity. To increase the accurary of reading 6-ary signal, partial response modes are also investigated.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.4
• /
• pp.69-75
• /
• 2014

We investigated flood control capacity of 484 agricultural reservoirs with storage capacity of over 1 million $m^3$ in South Korea. In general, agricultural reservoir secures flood control capacity by setting up limited water level during flood season from late June to mid-September. The flood control capacity of an agricultural reservoir during flood season can be divided into stable flood control capacity during non-flood season, stable flood control capacity associated with limited water level, and unstable flood control capacity associated with limited water level. In general, the flood control capacity significantly (P < 0.001) increased with reservoir capacity irrespective of type of spillway. The unstable flood control capacity accounted for about 20 % of reservoir capacity in the uncontrolled reservoirs. The study reservoirs showed flood control capacity of 0.60-65 billion (B) $m^3$ and stable flood control capacity of 0.43-47 B $m^3$, depending on the upper and lower limited water levels during the flood season. The stable flood control capacity of the gated reservoirs (0.29-0.33 B $m^3$) was about two times than that of reservoirs with uncontrolled spillways (0.14 B $m^3$). The ratios of stable flood control capacity to reservoir capacity for agricultural reservoirs range from 21 to 23 %, similar to that for Daecheong multipurpose dam. Moreover, the reservoirs with over 100 mm ratio of flood control capacity to watershed area accounted for 38 % of total gated reservoirs. The results indicate that many agricultural reservoirs may contribute to controlling flood in the small watersheds during the flood season.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.48-53
• /
• 2024

We predicted the calendar aging and long-term lifetime of lithium-ion batteries using an electrochemical-based SEI growth model. Numerical simulation was carried out employing the four different long-term SEI growth models (i.e., solvent diffusion limited model, electron migration limited model, Li-interstitial diffusion limited model, reaction limited model), and we calculated the capacity fade and loss of lithium inventory during calendar aging. The result showed that the electron migration limited model and Li-interstitial diffusion limited model showed lower capacity fade, while the solvent diffusion limited model and reaction limited model reached 80% of capacity fade within 10 years. During calendar aging, the lower storage temperature showed less capacity fade due to the hindrance of SEI growth rate. During cycling, the higher C-rate showed a shorter life cycle; however, the differences were not significant.

• Journal of Korean Society for Quality Management
• /
• v.36 no.2
• /
• pp.20-27
• /
• 2008

Tolerance design has been identified as an important research area and a number of models have been proposed in the literature. This paper investigates the effect of limited capacity on tolerance design for products with nominal-the-best type (N-type) quality characteristics. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are identically and independently distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal tolerance limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.77-86
• /
• 2008

Due to the rapid growth in automated testing and manufacturing systems, screening inspection becomes very attractive. In this paper, we investigate the effects of limited capacity on screening inspection using a surrogate variable. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are independently and identically distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal screening limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.157-168
• /
• 2001

The limited capacity model has been used to explain linguistic interactions and trade-offs that occur in children's speech. The purpose of the present investigation is to explore the interrelationship of MLU (as an index of syntactic development) and fluency in the spontaneous speech of normal children. Twenty normal children's (ten girls and ten boys, aged 36-48 months) spontaneous speech samples were obtained during free-play interactions with their mothers or other adults. The results indicated that the MLU of disfluent utterances were significantly longer than that of fluent utterances. Also, disfluencies occurred more frequently in longer utterances than in shorter utterances. In addition, the utterances where disfluencies occurred more than 2 times were longer than those where disfluencies occurred once. These results imply that the increase of MLU appear to affect not only the occurrence of disfluent utterances, but also the number of disfluencies within the utterances. In other' words, these findings show that there are trade-off effects between MLU and fluency. This is discussed within a limited capacity framework.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.905-911
• /
• 2005

We propose an efficient adaptive subcarrier selection scheme, in which the active subcarriers and their modulation and coding schemes (MCSs) are selected at the receiver, and subsequently conveyed to the transmitter using limited feedback We theoretically show that capacity maximization can be achieved by selecting subcarriers with highest signal-to-noise ratios (SNRs) and adapting the number of active subcarriers according to channel environments. Furthermore, an ordering based adaptive subcarrier selection algorithm is proposed to select the optimal active subcarriers with low complexity. Numerical results show that the proposed adaptive subcarrier selection scheme provides higher capacity than that obtained by water-filling approaches, even with limited feedback.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.622-629
• /
• 2004

In practical control systems, the capacity of actuators is limited and this degrades the system performances and it is often a source of instability. To use full capacity of actuators, we adopt the gain scheduled control permitting the over saturation in controls. The basic idea of gain scheduled control is to use a higher gain control when the state variables are smaller and a lower gain control when the state variables are larger. First, we derive a constant H control and a reachable set while satisfying the degree of over saturation. Next, we divide this set into nested subsets and find $H_{\infty}$ controls at rack subsets while satisfying the degree of over saturation. Finally, the control gain is applied according to the status of states. Note that all procedures are done by solving linear matrix inequalities(LMI). Finally, we show the validity and applicability of our proposed control using the simulations of a six-story building subjected to the earthquake excitation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.2
• /
• pp.109-116
• /
• 1989

In many cases, production-inventory systems involves significant demand variations. Actual demand is probabilistic and the production capacity is also limited. Finding the proper production lot sizes to this problem usually requires heavy computational procedures. Therefore a heuristic approach were under various assumptions is highly recommended. In this paper, an approach with consideration of probabilistic demand and limited production capacity is proposed.

• Journal of the Korea Society for Simulation
• /
• v.9 no.2
• /
• pp.63-73
• /
• 2000

Due to the complexity of part flow and limited resources, FMS(Flexible Manufacturing System) develops blocking, starvation and deadlock problems, which reduce its performance. In order to minimize such problems buffers are imposed between workstations of the manufacturing lines. In this paper, we are concerned with finding the optimal buffer allocation with regard to maximizing system throughput in limited total buffer capacity situation of FMS. A dynamic programming algorithm to solve the buffer allocation problem is proposed. Computer simulation using Arena is experimented to show the validation of the proposed algorithm.