• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.592-593
• /
• 2015

Recently, the fault current has increased to exceed the rated breaking capacity of protective device due to the growth of the power demand on the power system where is changed into the loop-, mesh-, network grid. To limit fault current, the superconducting fault current limiter (SFCL) is announced with various methods. In many researches, the current limiting effect with the SFCL has been analyzed considering the rated breaking capacity of the CB with one fault condition. However, the power system has various short circuit and operation conditions. In order to select the capacity of the SFCL with reclosing operation and burden of the fault current on the protective device, the characteristics of the power system were investigated. Through the analysis, the evaluation method of the current rate was improved.

• Journal of ILASS-Korea
• /
• v.20 no.4
• /
• pp.241-246
• /
• 2015

The objective of the current study is to develop an 1D thermoacoustic model for predicting basic characteristics of combustion instability and to investigate effects of key parameters on the instabilities such as effects of flame geometry and acoustic boundary conditions. Another focus of the paper is placed on limit cycle prediction. In order to improve the model accuracy, the 1D model was modified considering the actual flame location and flame length (i.e. distribution of time delay). As a result, it is found that the reflection coefficients have a great effect on the growth rate of the instabilities. In addition, instability characteristics are shown to be strongly dependent upon the fuel compositions.

• Solar Energy
• /
• v.18 no.3
• /
• pp.137-146
• /
• 1998

In this paper, the current status of manufacturing technologies for GaAs/Si solar cell were revived and provied new MOCVD. In the manufacturing process of GaAs/Si solar cells and an experiment to get the high efficiency GaAs solar cells, we must investigate the optimum growth conditions to get high quality GaAs films on Si substrates by MOCVD. The GaAs on Si substrates has been recognized as a lightweight alternative to pure substrate for space applicaton. Because its density is less the half of GaAs or Ge.So GaAs/Si has twofold weight advantage to GaAs monolithic cell. The theoretical conversion efficiecy limit of tandem GaAs/Si solar cell is 32% under AM 0 and $25^{\circ}C$ condition. It was concluded that the development of cost effective MOCVD technologies shoud be ahead GaAs solar cells for achived move high efficiency III-V solar cells involving tandem structure.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.478-484
• /
• 2021

Cellular resources including transcriptional and translational machineries in bacteria are limited, yet microorganisms depend upon them to maximize cellular fitness. Bacteria have evolved strategies for using resources economically. Regulatory networks for the gene expression system enable the cell to synthesize proteins only when necessary. At the same time, regulatory interactions enable the cell to limit losses when the system cannot make a cellular profit due to fake substrates. Also, the architecture of the gene expression flow can be advantageous for clustering functionally related products, thus resulting in effective interactions among molecules. In addition, cellular systems modulate the investment of proteomes, depending upon nutrient qualities, and fast-growing cells spend more resources on the synthesis of ribosomes, whereas nonribosomal proteins are synthesized in nutrient-limited conditions. A deeper understanding of cellular mechanisms underlying the optimal allocation of cellular resources can be used for biotechnological purposes, such as designing complex genetic circuits and constructing microbial cell factories.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.114-118
• /
• 2022

The stabilized all-solid-state battery structure indicate a fundamental alternative to the development of next-generation energy storage devices. Existing liquid electrolyte structures severely limit battery stability, creating safety concerns due to the growth of Li dendrites during rapid charge/discharge cycles. In this study, a low-dimensional graphene quantum dot layer structure was applied to demonstrate stable operating characteristics based on Li+ ion conductivity and excellent electrochemical performance. Transmission electron microscopy analysis was performed to elucidate the microstructure at the interface. The low-dimensional structure of GQD-based solid electrolytes has provided an important strategy for stable scalable solid-state lithium battery applications at room temperature. This study indicates that the low-dimensional carbon structure of Li-GQDs can be an effective approach for the stabilization of solid-state Li matrix architectures.

• Korean journal of communication and information
• /
• v.74
• /
• pp.38-71
• /
• 2015

Based on the Foucault's governmentality, this study has described the self-government strategy that healing discourse is implemented during 2011-2013. Healing discourse's priority is the existence value of individual and full concentration about self is needed more than anything. In this process, people who need to heal and comfort are limit to de-politicized individuals. Healing discourse emphasizes that the current enhancement in order to become reflection and growth of self. Demands of reflection and growth is substitute the critics of the era and society, but also act as a specific code of conduct to individuals. While emphasizes the reflection and personal growth, healing discourse has top priority of the current value. However, in this process, criticism of the era issues and social structural factors are fundamentally excluded. People accepted healing discourse actively, decided empowering self by reflection and remorse. On the other hand, there is a crack and specificity in the dominant reception discourse likewise some subjects criticized that there is no realistic consolation, exposed the antipathy to the older generation, denied the way of problematized objectification. But this is a partial denial about healing as concrete technology, not fundamental resistance about neoliberal orders.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.111-111
• /
• 2022

According to data from the Ministry of Environment, food waste accounted for 27% of the nation5 s household waste in 2020, and 4.67 million tons of food waste is being discharged per year. According to the Food Waste Direct Landfill Prohibition Act, food waste must be incinerated, composted, fodder, and decomposed before landfilling. The cost of incineration and landfilling of food waste is considerable. Therefore, through the process of turning food waste into fertilizer, we are going to investigate the limit of crop application and the change in the growth of crops during continuous use of food waste fertilizer. This study investigated the growth of lettuce such as shoot length, root length, leaf number, fresh weight, and dry weight after treating lettuce with food waste dry powder mixed fertilizer. The experiment was carried out continuously in 2021 (1st year) and 2022 (2nd year), and the treatment groups were set to No Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF×1), and Mixed Fertilizer×2 (MF×2), was repeated 3 times. As a result of the 1st year growth survey, there was no significant difference between NT and CF in the case of shoot length, but MF×1 and MF×2 were significantly decreased compared to NT. Root length was not significantly different in all treatment groups. As for the leaf number, there was no significant difference between NT and MF×1, but CF and MF×2 were significantly decreased compared to NT. In fresh weight, MF×1 and MF×2 were significantly decreased compared to NT, and in the case of dry weight, there was no significant difference between NT, MF×1, and MF×2. As a result of the 2nd year growth survey, there was a significant difference in CF and MF×2 in leaf number, but there was no significant difference in all treatment groups with respect to shoot length, root length, fresh weight, and dry weight. Through continuous additional research, it is necessary to confirm the change in soil composition and the growth of crops due to food waste fertilizer treatment.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.443-449
• /
• 2022

With climate change and the global population growth, the frequency and scope of wildfires are constantly increasing, which threatened people's lives and property. For example, according to California Department of Forestry and Fire Protection, in 2020, a total of 9,917 incidents related to wildfires were reported in California, with an estimated burned area of 4,257,863 acres, resulting in 33 fatalities and 10,488 structures damaged or destroyed. At the same time, the ongoing development of technology provides new tools to simulate and analyze the spread of wildfires. How to use new technology to reduce the losses caused by wildfire is an important research topic. A potentially feasible strategy is to simulate and analyze the spread of wildfires through computing technology to explore the impact of different factors (such as weather, terrain, etc.) on the spread of wildfires, figure out how to take preemptive/responsive measures to minimize potential losses caused by wildfires, and as a result achieve better management support of wildfires. In preparation for pursuing these goals, the authors used a powerful computing framework, Spark, developed by the Commonwealth Scientific and Industrial Research Organization (CSIRO), to study the effects of different weather factors (wind speed, wind direction, air temperature, and relative humidity) on the spread of wildfires. The test results showed that wind is a key factor in determining the spread of wildfires. A stable weather condition (stable wind and air conditions) is beneficial to limit the spread of wildfires. Joint consideration of weather factors and environmental obstacles can help limit the threat of wildfires.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.160-168
• /
• 1998

In order to investigate the color variation and the solubility limit in wagnerites by metal ion substitution, wagnerite ($A_2XO_4Z$) was synthesized and then, substituted by coloring metal ions, especially $CO^{2+},Ni^{2+}$ and $Cu^{2+}$ ions. When calcium was replaced with Mg, Co, Ni and Cu divalent ions, solid solutions were formed with a limited solubility. Single phase wagnerites were synthesized by the substitution of Ca with Mg and Co, and their colors were white and purple, respectively. Substitutions with $Li^+$ were succeeded in the specific composition and the substitution of vanadium for $X^{5+}$ were attempted, resulting in the wagnerites of dark purple, dark gold and light yellow colors. The substitution of chlorine was, also, attmepted for the fluorine site.

• Advanced Composite Materials
• /
• v.18 no.1
• /
• pp.77-93
• /
• 2009

This paper investigated the damage transition mechanism between the fiber-breaking mode and the fiber-avoiding crack mode when the fiber-length is reduced in the unidirectional discontinuous carbon fiber-reinforced-plastics (CFRP) composites. The critical fiber-length for the transition is a key parameter for the manufacturing of flexible and high-strength CFRP composites with thermoset resin, because below this limit, we cannot take full advantage of the superior strength properties of fibers. For this discussion, we presented a numerical model for the microscopic damage and fracture of unidirectional discontinuous fiber-reinforced plastics. The model addressed the microscopic damage generated in these composites; the matrix crack with continuum damage mechanics model and the fiber breakage with the Weibull model for fiber strengths. With this numerical model, the damage transition behavior was discussed when the fiber length was varied. The comparison revealed that the length of discontinuous fibers in composites influences the formation and growth of the cluster of fiber-end damage, which causes the damage mode transition. Since the composite strength is significantly reduced below the critical fiber-length for the transition to fiber-avoiding crack mode, we should understand the damage mode transition appropriately with the analysis on the cluster growth of fiber-end damage.