• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.983-988
• /
• 2016

Internet of Things Iranian people and things, things and things are connected through the Cloud. It can significantly save energy through a combination of LED lighting as a new ICT technologies and industry-to provide a human-centric, eco-friendly, and the content is embedded multifunction solutions that meet your needs, environment, implementation time according to user requirements, technology It can be systematized as converged next-generation lighting. In this paper, we have developed regarding whether the building in relation to the LED lighting control system using smart devices and Cloud-based user as a human connection through the board to the Arduino Yun lit LED lighting, wireless smart device or to the Cloud or off. After the Arduino Yun is connected to the Internet, taking the current date and time information from the Linux shell command used the way coming across the bridge (BRIDGE) its value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.553-556
• /
• 2013

Currently green growth and energy saving are major issues and solution using low-power LED lighting devices are gaining popularity. There are a few standards to control these LED lighting equipment and DMX512 protocol is a typical communication control standard used. DMX512 lighting control protocol is one of standard protocols widely used in various fields which include mainly stage lighting and landscape lighting. But in DMX512 protocol, line is to be connected to a wired connection. Advantage of wired connection is stable data transfer operation but it adds complexity and certain constraints as well in wired connection. To solve this problem, wired connection can be replaced efficiently with a wireless connection but for wireless, problem of data loss and two way communications arises. In this paper, these problems of wireless communication for DMX512 have been addressed and solutions for two way communications and data loss problem have been proposed.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.41-51
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.700-705
• /
• 2013

If LED lighting is to be used in home networking, a home gateway and power line communication are needed in delivering data. In addition, an appropriate multiple access scheme reflecting LED's property is required. In this paper, a home networking system that can serve wide in-building area by integrating PLC and VLC, is proposed and implemented, then its performance is measured. A binary CDMA is used in the multiple access since this scheme is good for nonlinear device like LED, while infrared is used in the upstream transmission.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.306-312
• /
• 2014

The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2016

The augmented reality is the environment which consists of real-world view and information drawn by computer. Since the image which user can see through augmented reality device is a synthetic image composed by real-view and virtual image, it is important to make the virtual image generated by computer well harmonized with real-view image. In this paper, we present reviews of several works about computer vision and graphics methods which give user realistic augmented reality experience. To generate visually harmonized synthetic image which consists of a real and a virtual image, 3D geometry and environmental information such as lighting or material surface reflectivity should be known by the computer. There are lots of computer vision methods which aim to estimate those. We introduce some of the approaches related to acquiring geometric information, lighting environment and material surface properties using monocular or multi-view images. We expect that this paper gives reader's intuition of the computer vision methods for providing a realistic augmented reality experience.

• Applied Science and Convergence Technology
• /
• v.27 no.3
• /
• pp.52-55
• /
• 2018

We reported a new method to enhance the photoluminescence (PL) properties of $Eu^{3+}$ ions doped $Gd_2Mo_4O_{15}$ phosphors via cation substitution. With the aid of conventional sol-gel method, a series of $Eu^{3+}$ ions doped $Gd_{2(1-x)}Y_{2x}Mo_4O_{15}$ phosphors were prepared. The prepared samples emitted red light when excited at 393 nm. Moreover, when part of the $Gd^{3+}$ ions was substituted by the $Y^{3+}$ ions, the PL emission intensity of the studied samples was enhanced and the optimal doping concentration for $Y^{3+}$ ions was 30 mol%. The calculated CIE coordinate (0.663,0.337) was situated in the red region. Furthermore, the thermal quenching behaviors of the synthesized $Eu^{3+}$ ions doped $Gd_{2(1-x)}Y_{2x}Mo_4O_{15}$ phosphors were studied. At last, we also packaged a red-emitting light-emitting diode device by integrating the obtained phosphors and a near-ultraviolet chip to verify the applications of the $Eu^{3+}$ ions doped $Gd_{2(1-x)}Y_{2x}Mo_4O_{15}$ phosphors for indoor lighting.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.75-81
• /
• 2012

In this study, vibration characteristics in according to the load type of cast resin transformer using vibration measurement device were compared. Measurement conditions are the same installation and operation of the three-phase cast resin transformer. If the load increases in transformer using the rotating machinery, the frequency is growing. In the transformer using the lighting and heating loads, it's detected the 55 [${\mu}m/s$] in or outside and 120 [${\mu}m/s$] or more at 60[Hz], the 30 [${\mu}m/s$] in or outside at 120[Hz], and the 70 [${\mu}m/s$] in or outside at 420[Hz]. When increases the loads, it's appeared the 60 [${\mu}m/s$] or less at 450[Hz] or more in rotating machinery, but the velocity of lighting and lighting loads are appeared from 5[${\mu}m/s$] to 115[${\mu}m/s$] inside the 420[Hz] in the same load condition of 20[%]. Through this study, it's verified that there are differences the internal vibration in according to the type of load in cast resin transformer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.264-264
• /
• 2009

The sensitivity lighting of pendant type used Micro-controller AVR, embodiment method for Munsell chromaticity diagram system and adoption method for light source lens respectively. About a plan design of light fixture, LED circuit designed flow chart of circuits and LED driver of organizations in electron device. For used Solidworks soft ware program, LED light source must take a heat shink part and LED light fixture module for sensitivity lighting of pendant type into considerations