• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.439-439
• /
• 2012

ZnO 나노로드는 큰 밴드갭 에너지(~3.37 eV)와 60 meV의 높은 엑시톤 결합 에너지(exciton binding energy)를 갖고 있으며, 우수한 전기적, 광학적 특성을 지닌 1차원 나노구조의 금속산화물로서 태양전지 및 광전소자 널리 응용되고 있다. 이러한 ZnO 나노로드를 성장하는 방법 중에 전기화학증착법(electrochemical deposition method)은 전도성 물질위에 증착된 시드층(seed layer)을 성장용액에 담그어 전압을 인가하여 만들기 때문에 기존의 수열합성법(hydrothermal method), 졸-겔 법(sol-gel method)보다 비교적 간단한 공정과정으로 저온에서 빠르게 물질을 성장시킬 수 있는 장점이 있다. 한편, 디스플레이 산업에서 ITO (indium tin oxide)는 투명 전도성 산화물(transparent conductive oxide)로써 가시광 파장영역에서 높은 투과율과 전도성을 가지며, 액정디스플레이, LED (Light emitting diode), 태양전지 등의 다양한 소자에 투명전극 재료로 쓰이고 있다. 또한 최근 ITO를 유연한 PET (polyethylene terephthalate) 기판 위에 증착은 얇고, 가볍고, 휘어지기 쉬워 휴대하기 편하기 때문에 차세대 광전자소자 응용에 가능성이 크다. 본 연구에서는 ZnO 나노로드를 ITO/PET 기판위에 전기화학증착법으로 성장하여, 구조적 및 광학적 특성을 분석하였다. 시드층을 형성하기 위해 RF 마그네트론 스퍼터를 이용하여 ~20 nm 두께의 ZnO 박막을 증착시킨 후, zinc nitrate와 hexamethylenetetramine이 포함된 수용액에 시료를 담그어 전압을 인가하였다. 용액의 농도와 인가전압을 조절하여 여러 가지 성장조건에 대한 ZnO 나노로드의 구조적, 광학적 특성을 비교하였다. 성장된 시료의 형태와 결정성을 조사하기 위해, field-emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD)을 사용하였으며, UV-vis-NIS spectrophotometer, photoluminescence (PL) 측정장비를 사용하여 광학적 특성을 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.148-149
• /
• 2012

This paper reports doping of carbon atoms in GaN layer, which based on dimethylhydrazine (DMHy) and growth temperature. It is well known that dislocations can act as non-radiative recombination center in light emitting diode (LED). Recently, many researchers have tried to reduce the dislocation density by using various techniques such as lateral epitaxial overgrowth (LEO) [1] and patterned sapphire substrate (PSS) [2], and etc. However, LEO and PSS techniques require additional complicated steps to make masks or patterns on the substrate. Some reports also showed insertion of carbon doped layer may have good effect on crystal quality of GaN layer [3]. Here we report the growth of GaN epitaxial layer by inserting carbon doped GaN layer into GaN epitaxial layer. GaN:C layer growth was performed in metal-organic chemical vapor deposition (MOCVD) reactor, and DMHy was used as a carbon doping source. We elucidated the role of DMHy in various GaN:C growth temperature. When growth temperature of GaN decreases, the concentration of carbon increases. Hence, we also checked the carbon concentration with DMHy depending on growth temperature. Carbon concentration of conventional GaN is $1.15{\times}1016$. Carbon concentration can be achieved up to $4.68{\times}1,018$. GaN epilayer quality measured by XRD rocking curve get better with GaN:C layer insertion. FWHM of (002) was decreased from 245 arcsec to 234 arcsec and FWHM of (102) decreased from 338 arcsec to 302 arcsec. By comparing the quality of GaN:C layer inserted GaN with conventional GaN, we confirmed that GaN:C interlayer can block dislocations.

• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.144-144
• /
• 2008

Blue light emitting diode structures consisting of the InGaN/GaN multiple quantum wells were grown by metalorganic chemical vapor deposition at different growth temperatures for the p-GaN contact layers and the influence of growth temperature on the emission and microstructural properties was investigated. The I-V and electroluminescence measurements showed that the sample with a p-GaN layer grown at $1084^{\circ}C$ had a lower electrical turn-on voltage and series resistance, andenhanced output power despite the low photoluminescence intensity. Transmission electron microscopy (TEM) revealed that the intense electro luminescence was due to the formation of a p-GaN layer with an even distribution of Mg dopants, which was confirmed by TEM image contrast and strain evaluations. These results suggest that the growth temperature should be optimized carefully to ensurethe homogeneous distribution of Mg as well as the total Mg contents in the growth of the p-type layer.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.30 no.4
• /
• pp.62-74
• /
• 2017

Objectives : The purpose of this study is to investigate the effect of laser therapy for diabetic ulcer by using methods of systematic review. Methods : In this review, PubMed, Cochrane library, Web of Science, CNKI, CiNii, J-STAGE, NDSL and OASIS were used as the search engines. The search period is from the start date of the search engine to October 3, 2016. Randomized controlled trials(RCTs) using laser therapy for diabetic ulcer were searched and extracted by two independent researchers. Risk of bias(RoB) of Cochrane was used to assess methodological quality of studies. Results : Finally, five RCTs were selected. The follow-up period ranged from 15 days to 20 weeks. InGaAlP laser, GaAlAs laser and light emitting diode(LED) were used to treat diabetic ulcer. The clinical trials used sham laser irradiation or standard treatment as control in comparison to laser therapy. The endpoints included ulcer size, rate of healing and time to healing with follow-up period. The RCTs demonstrated therapeutic outcomes with no adverse effect. Most items of RoB were unclear and methodological quality was low. Conclusions : Our analysis suggests that laser therapy has therapeutic effects for diabetic ulcer. However, more systematic and stringent clinical trials will be required.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.341-349
• /
• 2021

We studies to verify results similar to those of previous experiments, and their potential as a lighting device through optical characteristics experiments and resonance and optical characteristics simulations of array devices. The photonic quantum ring (PQR) device having a mesa diameter of 40 ㎛ and an internal hole diameter of 3 ㎛ was fabricated. Through the near-field observation of the fabricated device, it was found that the PQR device operates even at ㎂, and also that the mesa and hole devices are driven independently of each other. As a result of measuring the wavelength spectrum of the device according to the location, the coupling phenomenon due to mesa and holes was confirmed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.112-117
• /
• 2024

The Internet of Things (IoT) device is a key component for Industry 4.0, which is the network in homes, factories, buildings, and infrastructures to monitor and control the systems. To demonstrate the IoT network, batteries are widely utilized as power sources, and the batteries inevitably require repeated replacement due to their limited capacity. Magneto-mechano-electric (MME) generators are one of the candidate to develop self-powered IoT systems since MME generators can harvest electricity from stray alternating current (AC) magnetic fields arising from electric power cables. Herein, we report a magneto-mechano-triboelectric generator enabled by a ferromagnetic-ferroelectric composite. In the triboelectric nylon matrix, a ferromagnetic carbonyl iron powder (CIP) was introduced to induce magnetic force near the AC magnetic field for MME harvesting. Additionally, a ferroelectric ceramic powder was also added to the MME composite material to enhance the charge-trapping capability during triboelectric harvesting. The final ferromagnetic-ferroelectric composite-based MME triboelectric harvester can generate an open-circuit voltage and a short-circuit current of 110 V and 8 μA, respectively, which were enough to turn on a light emitting diode (LED) and charge a capacitor. These results verify the feasibility of the MME triboelectric generator for not only harvesting electricity from an AC magnetic field but also for various self-powered IoT applications.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.407-414
• /
• 2014

The aim of this study was to evaluate the photodynamic therapy effects against staphylococci using Photofrin and Radachlorin with Light emitting diode(LED). Experimental methods, The bacterial suspensions containing Staphylococcus aureus and Staphylococcus epidermidis at $1{\times}10^5$ were prepared and diluted to different concentrations of photosensitizer, Photofrin or Radachlorin, on 1.25, 2. 5,5 and $10{\mu}g/ml$. The bacterial suspensions were exposed to 630 and 670 nm LED light at the energy density of 14.4 and $19.8J/cm^2$, respectively. The CFU results of S. aureus and S. epidermidis were showed 33 and 50 colony forming at $5{\mu}g/ml$ of Photofrin, respectively and both of them perfectely were dead at $5{\mu}g/ml$ of Radachlorin. The fluorescent intensity by flow cytometry was showed the increase in the dead cells than the normal cells. In the TEM photograph, the damage of bacterial membrane and the distortion of cell morphology were observed. These results suggest that photodynamic therapy combine with Photofrin and Radachlorin can be applied a new modality for antibacterial therapy.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.214-220
• /
• 2013

Hydrophobic coating on a silicate-based yellow phosphor ($Sr_2SiO_4:Eu^{2+}$) was carried out by using hexamethyldisiloxane (HMDSO) precursor in an atmospheric pressure dielectric barrier discharge plasma reactor, eventually to improve the long-term stability and reliability of the phosphor. The phosphor powder samples were characterized by a scanning electron microscope (SEM), a transmission electron microscope (TEM), a fluorescence spectrophotometer and a contact angle analyzer. After the coating was prepared, the contact angle of the phosphor powder increased to $133.0^{\circ}$ for water and to $140.5^{\circ}$ for glycerol, indicating that a hydrophobic layer was formed on its surface. The phosphor coated with HMDSO exhibited photoluminescence enhancement up to 7.8%. The SEM and TEM images of the phosphor powder revealed that the plasma coating led to a morphological change from grain-like structure to smooth surface with 31~46 nm thick hydrophobic layer. The light emitting diode (3528 1 chip LED) fabricated with the coated phosphor showed a substantial enhancement in the reliability under a special test condition at $85^{\circ}C$ and 85% relative humidity for 1,000 h (85/85 testing). The plasma-mediated method proposed in this work may be applicable to the formation of 3-dimensional coating layer on irregular-shaped phosphor powder, thereby improving the reliability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.99-99
• /
• 2013

In this talk, I will present two research works in progress, which are: i) mapping of piezoelectric polarization and associated charge density distribution in the heteroepitaxial InGaN/GaN multi-quantum well (MQW) structure of a light emitting diode (LED) by using inline electron holography and ii) in-situ observation of the polarization switching process of an ferroelectric Pb(Zr1-x,Tix)O3 (PZT) thin film capacitor under an applied electric field in transmission electron microscope (TEM). In the first part, I will show that strain as well as total charge density distributions can be mapped quantitatively across all the functional layers constituting a LED, including n-type GaN, InGaN/GaN MQWs, and p-type GaN with sub-nm spatial resolution (~0.8 nm) by using inline electron holography. The experimentally obtained strain maps were verified by comparison with finite element method simulations and confirmed that not only InGaN QWs (2.5 nm in thickness) but also GaN QBs (10 nm in thickness) in the MQW structure are strained complementary to accommodate the lattice misfit strain. Because of this complementary strain of GaN QBs, the strain gradient and also (piezoelectric) polarization gradient across the MQW changes more steeply than expected, resulting in more polarization charge density at the MQW interfaces than the typically expected value from the spontaneous polarization mismatch alone. By quantitative and comparative analysis of the total charge density map with the polarization charge map, we can clarify what extent of the polarization charges are compensated by the electrons supplied from the n-doped GaN QBs. Comparison with the simulated energy band diagrams with various screening parameters show that only 60% of the net polarization charges are compensated by the electrons from the GaN QBs, which results in the internal field of ~2.0 MV cm-1 across each pair of GaN/InGaN of the MQW structure. In the second part of my talk, I will present in-situ observations of the polarization switching process of a planar Ni/PZT/SrRuO3 capacitor using TEM. We observed the preferential, but asymmetric, nucleation and forward growth of switched c-domains at the PZT/electrode interfaces arising from the built-in electric field beneath each interface. The subsequent sideways growth was inhibited by the depolarization field due to the imperfect charge compensation at the counter electrode and preexisting a-domain walls, leading to asymmetric switching. It was found that the preexisting a-domains split into fine a- and c-domains constituting a $90^{\circ}$ stripe domain pattern during the $180^{\circ}$ polarization switching process, revealing that these domains also actively participated in the out-of-plane polarization switching. The real-time observations uncovered the origin of the switching asymmetry and further clarified the importance of charged domain walls and the interfaces with electrodes in the ferroelectric switching processes.