• 상하수도학회지
• /
• 제27권6호
• /
• pp.743-750
• /
• 2013

In this study, the carbonized aggregate of light weight and high mechanical strength using sewage sludge was evaluated with changing carbonation variables of temperature, detention time and feed condition. Porosity and mechanical strength was simultaneously increased according to increase of carbonization temperature unexpectedly. Carbonization detention time above 1 hour nearly affect on the porosity, but mainly on mechanical strength of the carbonized aggregate in case of clay addition. On $900^{\circ}C$, porosity and mechanical strength was increased rapidly, but above $1000^{\circ}C$, porosity began to decrease. Clay addition was very effective on increase of mechanical strength following much loss in porosity. The carbonized aggregate manufactured at $900^{\circ}C$ adding 30 % clay in sewage sludge was higher a little in porosity and 3 times in mechanical strength than those at $700^{\circ}C$ not adding clay. Consequently, in manufacturing the carbonized aggregate having simultaneously high porosity and mechanical strength, it is desirable to have operational condition of $900{\sim}1000^{\circ}C$ temperature and 1 hour time, and clay addition within 30 % for further higher mechanical strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.405-408
• /
• 2006

In this study it compares a Japanese standards which is most similar contents with domestic standards related with the light weight aggregate concrete and derives the fundamental data from the results so that it will be able to refer at maintenance of standards or specifications in future. The case of domestic is the actual more insufficient condition which is described in the standards and the specifications than Japanese standards. For the production of he domestic light weight concrete the development of general standards and construction guides and control of water content ratio of the light weight aggregates become accomplished rightly in quality of construction site.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.166-167
• /
• 2013

Bottom ash, which is discharged through a wet process in a thermal power plant, contains much unburned coal due to quenching and much salt due to seawater. However, dry bottom ash discharged through a dry process contains low unburned coal and salt, and has light -weight due to many pores. Therefore, it is expected that it can be used as lightweight aggregate. This study deals with the basic properties of concrete used dry bottom ash as coarse aggregate. As a results, the concrete having high content of dry bottom ash aggregate showed high slump by using water reducing agent and its air content was within 5±1.5% as designed value, similarly to normal weight concrete. It also showed a lower compressive strength than 100% of crushed stone.

• 한국연소학회지
• /
• 제19권3호
• /
• pp.18-25
• /
• 2014

Bottom ash from a coal-fired power plant is usually landfilled to a nearby site, which causes a growing environmental concern and increased operating costs. One way of recycling the bottom ash is to produce light-weight aggregate (LWA) using a rotary kiln. This study investigated the temperature profiles of raw LWA particles in a rotary kiln to identify the range of operating conditions appropriate for ideal bloating. For this purpose, a new simulation method was developed to integrate a 1-dimensional model for the bed of LWA particles and the computational fluid dynamics (CFD) for the fuel combustion and gas flow. The temperature of LWA particles was found very sensitive to the changes in the air preheating temperature and excess air ratio. Therefore, an accurate control of the operation parameters was essential to achieve the bloating of LWA particles without excessive sintering or melting.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.111-116
• /
• 2022

최근 들어 건축구조물은 초고층화 및 대규모화 하는 경향에 있으며, 콘크리트 기술의 발달로 인하여 철근콘크리트 구조로 초고층 건축물을 축조하는 것이 일반화 되어 가고 있는 실정이다. 초고층 건축물에 적용되는 철근콘크리트주조는 고유동·고강도 콘크리트가 적용되기 때문에 시공성이 향상되고 단면축소가 가능하게 되었다. 또한 철근콘크리트구조의 초고층 건축물에는 슬라이딩폼, ACS(Auto Climbing Form) 등 시스템 거푸집을 적용하기 때문에 시공의 신속성을 기할 수 있으며, 철골구조보다 저렴한 가격에 내화·내진 등 우수한 품질로 빠른 시일 내에 완성할 수 있게 되었다. 그러나 초고층 건축물을 철근콘크리트 구조로 시공할 경우는 자중이 커지게 된다는 단점을 가지게 된다. 이러한 단점을 보완하고자 개발된 것이 경량골재(LWA, Low Weight Aggregate)이며, 최근까지 다양한 종류의 경량골재가 개발되어지고 있다. 이러한 경량골재를 이용하여 콘크리트를 제조하면 철근콘크리트 구조물의 자중을 줄일 수 있다는 장점을 가지게 되지만, 콘크리트의 강도가 줄어든다는 단점을 가진다. 이는 경량골재가 일반적인 천연골재에 비하여 낮은 강도를 가지고 있기 때문으로 최근에는 이러한 경량골재의 취약점을 보완하기 위한 연구가 진행되고 있다. 본 연구에서는 경량골재 표면코팅 유무에 따른 시멘트 경화체의 강도특성을 알아보기 위한 실험적 연구를 진행하였다. 그 결과, 압축강도는 표면코팅 한 경량골재가 코팅하지 않은 경량골재보다 높은 강도발현을 나타냈으며, 물/시멘트 비 50 %에서 표면코팅 경량골재가 높은 압축강도를 발현하는 것을 알 수 있었다. 이는 표면코팅 경량골재 혼입 시멘트 경화체의 계면 공극이 고로슬래그 미분말 입자로 메워졌기 때문인 것으로 확인되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.775-780
• /
• 2002

Sandwich panel made by foamed styrene and ployuretane has been used generally in the construction area because of the high thermal conductivity and light weight but they occur harmful gases to both bodies and environments in the high temperature over $50^{\circ}C$. So, the purpose of this study is to investigate the physical properties of light-weight panel using the non-structural lightweight aggregate as a part of the substitution of foamed styrene and ployuretane. This paper dealt with the effect of the addition of polymer dispersion such as SBR, St/BA-1 and St/BA-2 having polymer-cement ratio as 5, 10, 15% and the filling ratio of continuous void as 50, 60% on the strength of polymer-modified sandwich panel core. From the results, we could know that the compressive and flexural strength of the sandwich panel core using non-structural lightweight aggregate and polymer dispersion such as SBR, St/BA-1 and St/BA-2 tended to be increased with an increase in the polymer-cement ratio and the filling ratio of continuous void.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.481-484
• /
• 2003

This study is intended to investigate application of mica waste(MS) to fine aggregate for mortar by comparing it with cement mortar in which crushed sand(CS) and river sand(NS) are used. According to the results, as the physical properties of aggregate, specific gravity is large in order of MS, NS and CS, absorption ratio in order of MS, CS and NS, and unit weight and solid volume percentage in order of NS, CS and MS. In the case of MS mortar, mechanical properties, drying shrinkage and heat conduction ratio are reduced, but the radiative amount of infrared light is excellent compared with NS mortar. Fluidity and unit weight of MS mortar is larger than those of CS mortar, and strength does not make differences. Length change by drying shrinkage is larger, but heat conduction ratio and radiative amount of infrared light are smaller than CS mortar. Thus, it proves that MS can be used in place of NS and CS, but its quality is deteriorated slightly.

• 콘크리트학회논문집
• /
• 제23권6호
• /
• pp.723-730
• /
• 2011

콘크리트 중의 골재가 차지하는 비율은 약 70~80 vol%로서 콘크리트의 고온 역학적 성상에 큰 영향요소로 작용할 수 있다. 이 연구는 고온시 콘크리트의 역학적 특성을 평가하기 위한 일환으로써 다양한 환경조건, 즉 고온조건, 하중조건에 따른 역학적 특성을 비교하기 위하여 목표강도 60 MPa급 보통 골재 및 경량 골재 콘크리트를 대상으로 선정하였다. 사용된 시험체는 ${\phi}100{\times}200mm$로서 상온 압축강도의 0%, 20%, 40% 하중을 재하한 상태에서 고온에 따른 강도, 탄성계수, 열팽창 변형(thermal strain), 전체 변형(total strain), 내력저하수축(transient creep) 등 고온에서의 역학적 특성을 평가하였다. 시험 결과 골재의 열팽창계수가 작은 경량 콘크리트는 열팽창 변형이 일반 골재를 사용한 콘크리트에 비하여 전반적으로 작게 나타났으며, 고온조건인 $700^{\circ}C$에서도 압축강도 저하가 상온강도에 대하여 80% 수준으로 나타났다. 또한 재하에 의한 내력저하수축은 $500^{\circ}C$를 기준으로 콘크리트의 변형을 팽창에서 수축으로 전환시키는 영향요인으로써, 콘크리트와 골재의 열팽창 변형비(concrete /aggregate)가 수축의 경향이 큰 경우 콘크리트의 내력저하가 적은 경향을 확인할 수 있었다.

• 한국결정성장학회지
• /
• 제27권4호
• /
• pp.167-172
• /
• 2017

본 연구는 경량 및 내황산 특성을 가진 단면복구 모르타르 개발의 관한 연구로 Type I의 경량 및 폴리머 모르타르와 Type II의 내황산 단면복구 모르타르의 성능평가를 진행하였다. 성능평가는 KS F 4042의 품질기준으로 이루어졌으며, 그 결과 경량 및 내황산성이 우수하며 KS F 4042의 품질 기준을 모두 만족하는 결과를 도출하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.215-216
• /
• 2019

Recently, due to abnormal climate phenomena caused by greenhouse gas, flood damage such as local torrential rain has been emerging in Korea. Accordingly, there is a growing need for porous blocks capable of permeability in concrete, but there are limitations in commercialization due to problems such as high unit weight and flexural strength development limitations. This study investigates the unit weight and strength properties of porous blocks using bottom ash as an alternative to aggregate as part of a study to improve the light weight of porous blocks.