• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.353-362
• /
• 2022

Recently, transmittance of photomasks for ultra-violet (UV) region is getting more important, as the light source wavelength of an exposure process is shortened due to the demand for technologies about high integration and miniaturization of devices. Meanwhile, such problems can occur as damages or the reduction of yield of photomask as electrostatic damage (ESD) occurs in the weak parts due to the accumulation of static electricity and the electric charge on chromium metal layers which are light shielding layers, caused by the repeated contacts and the peeling off between the photomask and the substrate during the exposure process. Accordingly, there have been studies to improve transmittance and antistatic performance through various functional coatings on the photomask surface. In the present study, we manufactured antireflection films of Nb₂O₅, | SiO₂ structure and antistatic films of ITO designed on 100 × 100 × 3 mmt sodalime glass by DC magnetron sputtering system so that photomask can maintain high transmittance at I-line (365 nm). ITO thin film deposited using In/Sn (10 wt.%) on sodalime glass was optimized to be 10 nm-thick, 3.0 × 103 𝛺/☐ sheet resistance, and about 80% transmittance, which was relatively low transmittance because of the absorption properties of ITO thin film. High average transmittance of 91.45% was obtained from a double side antireflection and antistatic thin films structure of Nb₂O₅ 64 nm | SiO₂ 41 nm | sodalime glass | ITO 10 nm | Nb₂O₅ 64 nm | SiO₂ 41 nm.

• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.264-270
• /
• 2016

Self-powered neutron detector (SPND) is a sensor to monitor a neutron flux proportional to a reactor power of the nuclear power plants. Since an SPND is usually installed in the reactor core and does not require additional outside power, it generates electrons itself from interaction between neutrons and a neutron-sensitive material called an emitter, such as rhodium and vanadium. This paper presents the simulations of the depletion sensitivity evaluations based on MCNP models of rhodium and vanadium SPNDs and light water reactor fuel assembly. The evaluations include the detail geometries of the detectors and fuel assembly, and the modeling of rhodium and vanadium emitter depletion using MCNP and ORIGEN-S codes, and the realistic energy spectrum of beta rays using BETA-S code. The results of the simulations show that the lifetime of an SPND can be prolonged by using vanadium SPND than rhodium SPND. Also, the methods presented here can be used to analyze a life-time of those SPNDs using various emitter materials.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.109-115
• /
• 2002

In this study high power Nd:YAG laser welding of structural steel was investigated. For the test steel blocks of $50{\times}50{\times}200mm$ were cut and machined, and bead-on-plate weld was made on the machined surface. Argon, nitrogen, helium, dry air or mixed gases were used to find the effect of shielding conditions on the bead formation. Results demonstrated that there were Fe I rich region and Fe II rich region in the laser induced plasma column based on the spectral analysis with S-2000 field spectrometer The Fe I region was located at the root of the column near keyhole opening. On the other hand, Fe II region was found at the middle of the plasma column. In the Nd:YAG laser welding, Fe I region emitted continuum which had peak value at wave length of around 710nm, and Fe II region had the peak at 580nm. In the welding of steel by $CO_2$ laser, however, no continuum was observed. There showed two groups of strong spikes in the $CO_2$ laser welding; the first group was displayed at the wave band of 450-560nm. This spike group emitted stronger intensity of light and sharper peaks than those group at 680-800nm.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.33-37
• /
• 2008

Polycarbonate has a high transmittance to light, low specific gravity, flexibility and cost-effectiveness that extends the application field of the polymer to bio-engineering, optics, electronic parts, etc. Moreover, electro plating of metallic film on PC could endow the parts the electromagnetic interference shielding capability. However, poor adhesion of copper on PC limited the wide usage in the industry. In this work, a composite(PC/ABS) and MmSH(Momentary mold Surface Heating) injection process were used to improve the plating characteristics; plating thickness, gloss and adhesion. Also plasma treatment and chemical treatment were employed for improving adhesion. Plating characteristics on PC/ABS were better than those on PC due to the anchoring effect of butadiene. MmSH injection process could ameliorate the gloss and coating adhesion. Also plating thickness and adhesion of PC and PC/ABS were increased by plasma treatment.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.93-98
• /
• 2008

Several adhesive tapes have been studied in terms of their suitability for securing gold wires into positions for neutron flux measurements in the reactor core and irradiation facilities surrounding the core of the Open Pool Australian Light water (OPAL) reactor. Gamma ray spectrometry has been performed on each irradiated tape in order to identify and quantify activated components. Numerous metallic impurities have been identified in all tapes. Calculations relating to both the effective neutron shielding properties of the tapes and the error in measurement of the $^{198}Au$ activity caused by superfluous activity due to residual tape have been made. The most important identified effects were the prolonged cooling times required before safe enough levels of radioactivity to allow handling were reached, and extra activity caused by residual tape when measured with an ionisation chamber. Knowledge of the most suitable tape can allow a minimal contribution due to these effects, and the use of gamma spectrometry in preference to ionisation chamber measurements of the flux wires is shown to make all systematic errors due to the tape completely negligible.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.37-43
• /
• 2019

The existing smart farm technology has been systematized for the mass production rather than the consumer. There are many problems such as economical aspect to apply to actual rural environment due to aging. The purpose of this study is to apply smart farm technology based on the applicability of population aged in rural areas. Due to the heat wave, the crops in general greenhouse cultivation facilities suffered from damage such as sunlight damage. To minimize such damage, adjust the temperature and humidity environment or install a light-shielding film. However, the workers in the rural areas are aging and the elderly who are farming alone have a lot of difficulties in doing so. In the case of people with weak physical strength, there is a danger that they may lead to safety accidents when carrying heavy loads. In this paper, we propose 'Smart Palm capable of automatic transportation function', applying small smart vehicles that follow workers to existing smart farms to improve and prevent these problems. It is a smart farm that performs the control functions of the existing smart greenhouse environment, installs the rail for each trough, and has a vehicle that follows the worker. The smart app can directly control the greenhouse and the vehicle remotely manually.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.85-92
• /
• 2023

A safety helmet is considered the last gear to protect workers from harmful and dangerous events occurring on industrial sites. Recently, interest in the importance of personal protective equipment design reflecting individual characteristics has been emphasized to improve usability and convenience. However, it has been found that if it is inconvenient to wear or has poor work efficiency, it will not be used well or will be used incorrectly. In this study, an investigation was performed with 35 questions, direct observation, and intensive interviews of construction workers to determine the inconvenience and problems of wearing safety helmets. Moreover, managers of 9 construction sites in 6 cities were asked about the performance and design of safety helmets. As a positive answer, it was found that the brim (awning) of the safety helmet was shortened to give the safety glasses a light-shielding function. In addition, an upward adjustment all-in-one type safety helmet was requested. On the other hand, it was revealed that negative answers felt uncomfortable due to the brim (awning) on the front of the helmet. Based on the survey results, a new helmet model suitable for construction site activities was presented, and wearability improvement determinants were discovered through performance and design improvement.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.197-204
• /
• 2022

Recently, the demand has increased for protective clothing materials capable of shielding the wearer from bullets, fragment bullets, knives, and swords. It is therefore necessary to develop light and soft protective clothing materials with excellent wearability and mobility. To this end, research is being conducted on hybrid design methods for various highly functional materials, such as carbon nanotube (CNT) sheets, which are well known for their low weight and excellent strength. In this study, a hybrid protective material using CNT sheets was developed and its performance was evaluated. The material design incorporated a bonding method that used a binder for interlayer combination between the CNT sheets. Four types of binders were selected according to their characteristics and impregnated within CNT sheets, followed by further combination with aramid fabric to produce the hybrid protective material. After applying the binder, the tensile strength increased significantly, especially with the phenoxy binder, which has rigid characteristics. However, as the molecular weight of the phenoxy binder increased, the adhesive force and strength decreased. On the other hand, when a 25% lightweight-design and high-molecular-weight phenoxy binder were applied, the backface signature (BFS) decreased by 6.2 mm. When the CNT sheet was placed in the middle of the aramid fabric, the BFS was the lowest. In a stab resistance test, the penetration depth was the largest when the CNT sheet was in the middle layer. As the binder was applied, the stab resistance improvement against the P1 blade was most effective.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1544-1551
• /
• 2004

Effects of pH, sugar, ascorbic acid, organic acids and light sources on the stability of anthocyanin pigment extracted from Korean purple-fleshed potatoes (PL-6, PL-28, PL-31 and Jasim) were studied. The pH had remarkable influence on the color stability of anthocyanin pigment. With increasing pH, the color gradually fades as colorless pseudobases are formed. In acidic pH, anthocyanin was stable, but with increasing pH the color gradually changed to colorless. The addition of sugar decrease in color stability of the pigment during storage period. The most of organic acids, such as a tartaric, citric and succinic acids, were found to improve the stability of the pigment, while malic and malonic acid reduced the stability of the pigment. The addition of ascorbic acid considerable decreased in anthocyanin pigment stability, but the effect was not decreased by adding thiourea. The effect of light sources such as a darkroom, a fluorescent light, and sunlight, reduced gradually the stability of anthocyanin pigment. Therefore the pigment degradation could be minimized by shielding the light from the pigment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.806-811
• /
• 2003

Effects of pH, temperature, light, sugars, organic acids, metal ions, ascorbic acid, thiamine nicotinic acid and pyridoxine on the stability of the color of the cranberry solution were investigated. The pH had marked influences on the color of the cranberry solution: i.e., the color of the cranberry solution was more intense at low pH. It showed characteristic bathochromic shift as the pH of the solution increased. The half-lives of olor value were 34 days at 37$^{\circ}C$, 91 mins at 9$0^{\circ}C$ and 29 mins at 12$0^{\circ}C$. Light gave an adverse effect to the stability of the color. The color degradation can be minimized by shielding the light from the cranberry solution. Among the sugars tested, fructose was the most deleterious followed by sucrose, galactose, maltose and glucose. Fumaric acid was found to be the most effective in stabilizing the color followed by citric acid, malic acid, acetic acid, while tartaric acid was found to be deleterious. Among the metal ions tested N $a^{+}$ and $Mg^{2+}$ were found to be effective in stabilizing the color, while M $n^{2+}$ was found to be the most deleterious followed by F $e^{2+}$, $K^{+}$ and $Ca^{2+}$. Ascorbic acid was found to be deleterious considerably followed by thiamine, while nicotinic acid and pyridoxine were found to be effective in stabilizing the color feebly.or feebly.