• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.135-142
• /
• 1997

For lighting of dark and hazardous workplaces such as compartments of ships under construction, workers should use hand lamps of explosion-proof type. However, the heavy weight of such lamps has prevented most impatient workers from using such types of lamps extensively. In this paper, ire developed a light weight hand lamp of intrinsic safety type which reduced the weight a lot while maintaining or improving the lighting and explosion-proof function. We made a Prototype which consisted of lamp fixture and low/high frequency power supply. Testing results show that the hand lamp meets well all the explosion-proof testing requirements of the Korea Industrial Safety Corporation.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.314-326
• /
• 2017

The display, which is closely related to modern life, is being developed as a window on a network connecting individuals, devices, and even other individuals from simple display devices, as the IT industry develops. To achieve a thinner, brighter unit with less consumption for backlighting, the LED light source has applied, and the study of complex light-guiding plates to improve luminance, uniformity, and viewing angle has been initiated. In this paper, we summarize the research results for the scatterers' pattern formation of the light-guiding plate and the arrangement and composition of the light source, which have enabled remarkable development of the LED backlight unit over the last 10 years. In addition, a large-area flat-screen illumination system, applying the light-guiding-plate technology to a currently noteworthy LED light-fixture design, is outlined. Finally, we discuss the direction and way to develop the current technology more progressively.

• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.196-203
• /
• 2004

In The Lighting design is important to acknowledge appearance space. Development of artificial light makes a extension to life space in the Modern life. With the rapid development of efficient light sources, have lighting design acquired the tools that allow artificial lighting to be produced with adequate illuminance levels. However, by the task of defining the objectives and methods behind discipline, of deciding on the criteria by which the artificial lighting that is now provide many available data to be anpaied. The main concern is which illuminace levels and types of lighting will ensure optimum visual performance, high productive and safety at design which are affordable. This study is support to standard design process with material reflection rate, installing the lighting fixture, task illuminance level and automatic arithmetic calculation during the lighting design. Lighting Design database can check and support other final lighting level. A quantitative light that is primarily oriented toward providing a recommended illuminance level, the criterion of develop a concept that goes beyond the requirements that would ensure productivity and safety to meet the needs of the architecture and interior space. illuminance level is compose to space task and space code according to KS A 3011. To be able to design the visual effect of an environment the central reference quantity has to provided the Database.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.6-12
• /
• 2007

A flat fluorescent lamp (FFL) developed as a light source for LCD TV backlight was used as a light source for general lighting application and its electro-optical characteristics were measured and evaluated. The channels of FFL were formed from a flat glass at high temperature by using a mold. The performance of FFL with lighting future was shown to improve by optimizing the channel profile of FFL. In this paper, the brightness efficiency of FFL with lighting fixture was evaluated and compared with that of the hot cathode fluorescent lamp (HCFL), the major light source for general lighting. The optical efficiency of FFL with future was shown to be 72.7[1m/W].

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.64-71
• /
• 2012

An efficient cooling system is an essential part of the electronic packaging such as a high-luminance LED lighting. A special technology, Pulsating Heat Pipe (PHP), can be applied to improve cooling of a sealed, explosion-proof LED light fixture. In this paper, the characteristics of the pulsating heat pipes in the imposed thermal boundary conditions of LED lightings were experimentally investigated and a PHP device that works free of alignment angle was investigated for cooling of explosion-proof LED lights. Five working fluids of ethanol, FC-72, R-123, water, and acetone were chosen for comparison. The experimental pulsating heat pipe was made of copper tubes of internal diameter of 2.1 mm, 26 turns. A variable heat source of electric heater and an array of cooling fins were attached to the pulsating heat pipe. For the alignment of the heating part at bottom, an optimum charging ratio (liquid fluid volume to total volume) was about 50% for most of the fluids and water showed the highest heat transfer performance. For the alignment of the heating part on top, however, only R-123 worked in an un-looped construction. This unique advantage of R-123 is attributed to its high vapor pressure gradient. Applying these findings, a cooling device for an explosion-proof type of LED light rated 30 W was constructed and tested successfully.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1770-1772
• /
• 1998

This study is concluded under by investigation about the lighting environment on a blackboard in elementary, middle, high school of inchon metropolitan. 1. The illumination was approximated to standard value in the side of quantity by the result of the Mimistry of Education's command. However, the uniformity of illuminescence was relatively increased. 2. In order to raise the blackboard lighting, we installed local lighting fixture for blackboard but most of schools are directly adopted to the way of sticking to the blackboard and the lower part of the blackboard is not effective. So that it is desirable of teacher and students to put the local lighting in front of the higher part of the blackboard or install in setting the perfect diffusion light from the ceiling. 3. Deviation of luminance is also more groat when local lighting exist for blackboard. And, regardless of local lighting, luminance of blackboard in side of window, from direction of floor is high because of regular reflected light. Therefore a curtain or blind must be installed pertinently.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.5
• /
• pp.36-48
• /
• 2008

This study examines the influence of control algorithms on dimming performance to determine appropriate control setting when direct/indirect lighting is controlled by a daylight dimming system. Computer simulation were performed for a small office with double skin envelope under various daylight conditions. A retractable fabric shading and Venetian blind were applied for internal and external envelopes under three CIE standard sky conditions. Unshielded and partially-shielded photosensors were used, and three control algorithms were applied for the sensors. In general, dimming level was too excessive due to the direct impact of light from lighting fixture to the photosensor. Providing insufficient lighting output, the unshielded photosensor completely failed to secure required illuminance under any daylight condition. When a partially-shielded photosensor was applied under clear sky, three setting points functioned effectively. Less sensitivity for the partially-shielded photosensor was effective to control the dimming system optimally with reasonable energy saving. However, the daylight dimming control system for direct/indirect lighting does not appear to be energy effective when photosensors without enough shielded area is installed on ceiling where light from fixtures reaches directly.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.6
• /
• pp.345-351
• /
• 2016

Objectives: This study compared the impact of implant surface treatment on the stability and osseointegration of implants in dog mandibles. Materials and Methods: Six adult dogs received a total of 48 implants that were prepared using four different surface treatments; resorbable blast media (RBM), hydroxyapatite (HA), hydrothermal-treated HA, and sand blasting and acid etching (SLA). Implants were installed, and dogs were separated into 2- and 4-week groups. Implant stability was evaluated via Periotest M, Osstell Mentor, and removal torque analyzers. A histomorphometric analysis was also performed. Results: The stability evaluation showed that all groups generally had satisfactory values. The histomorphometric evaluation via a light microscope revealed that the HA surface implant group had the highest ratio of new bone formation on the entire fixture. The hydrothermal-treated HA surface implant group showed a high ratio of bone-to-implant contact in the upper half of the implant area. Conclusion: The hydrothermal-treated HA implant improved the bone-to-implant contact ratio on the upper fixture, which increased the implant stability.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.103-110
• /
• 2016

This study aims to establish the standards to give the design weight in case when developing equipment designs, by classifying products with similar purposes in accordance with the morphological characteristics and also extracting the typicality. Limiting the sampling group for the extraction of the typicality to a pendant-type and a ceiling buried-type through the preceding case study and consultation with experts, the survey was conducted for majors and relevant workers in six cities, sampling products released in Korea and Japan before May 2016. The 1st survey was about the Morphological classification, and the 2nd times about the extraction of the typicality while the 3rd one was about the classification of the morphological attributes. By drawing the design attributes based on the functional/morphological classification and formative principles, it aimed to establish the base of the future research on the measurement of design weight. The results of this study aim to efficiently establish the roles of design technology in accordance with changes in the lighting fixture market caused by the substitution of light sources, and also to draw the development direction to rapidly cope with the accelerated changes in lighting design types and corporate R&D.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.25-31
• /
• 1997

The purpose of this study is to provide the guideline of the interior design of Wedding halls, based on a series of investigations and analysis of the consumer's preference. Marriage is an essential ceremony of family life. However the Wedding culture has been changed since the western culture affected to traditional marriage concept. Many countries have different wedding culture and traditiov. Ours are largely divided into the traditional Korean wedding ceremony and the modern, i.e. the westerv. The customer's preference and the opinion for the Wedding hall analyzed through survey to find out the guideline for the interior desigv. The result of this research can be summarized as followings; 1) The interior design was the most influential element when choosing the wedding hall. 2) The preferred colors for the wedding hall were pink and white. 3) The preferred light fixture for the wedding hall was the chandelier. 4) The main points concerned in the guideline of interior design for the wedding hall were building facade, accessibility toward the wedding hall, parking lot, traffic circulation and etc.