• 제목/요약/키워드: Light control device

검색결과 327건 처리시간 0.026초

성견 하악 골체부 신장시 신장부위의 증식세포핵항원과 제 1형 교원질 발현에 관한 연구 (EXPRESSION OF PROLIFERATING CELL NUCLEAR ANTIGEN AND TYPE I COLLAGEN IN THE ELONGATED BONE IN THE MANDIBLE OF ADULT MONGREL DOGS)

  • 임순모;안병근;박영주;박희건;박준우;이건주;이용찬;조병욱
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권5호
    • /
    • pp.385-396
    • /
    • 2001
  • The purpose of this experiment was to examine the histological changes and the pattern of expression of proliferating cell nuclear antigen(PCNA) and type I collagen in the elongated bone affected by osteodistraction of the mandibular body in an adult canine model. Seven adult male mongrel dogs weighing over 20kg were used for this experiment. The author excluded 3 animals because they died before the planned time of sacrifice. The custom-made linear extraoral device and 4 bicortical fixation screws 2.3mm in diameter, 50mm in total length, 15mm in screw length were used in each animal. The distal part of the distractor produced a 0.75mm gap between proximal and distal bony segments every $360^{\circ}$ turn of the rotation rod of the device. The mandibular body of the right side from each animal was experimental side and the left side was left intact and served as control. At the experimental side, the mandibular body was osteotomized. After 5-day latency period, the segments were distracted with a rate of 1.1mm/day and a rhythm of two/day for ensuing 7 days. The animals were sacrificed at the 4th. 17th, and 32th day after the end of the distraction. The bony specimens were decalcified, embedded in paraffin, sectioned $5{\mu}m$ thick and stained with Masson trichrome and examined under the light microscope. The immunohistochemical examinations using anti-PCNA antibody and anti-type-I collagen antibody were performed to examine the pattern of the expression of PCNA and type I collagen, respectively. Results : 1. The mean increment of the distance between the proximal and distal screw-holding parts of the distractor was 6.8mm. The average elongation of the mandible in the experimental side was 5.3mm. The loss of elongation was 1.5mm in average. 2. New bone was already observed at the 4th. day after the end of distraction. But, bony union was not completed in the distraction gap at the 32th. day after the end of distraction by radiographic and microscopic examinations. 3. The expression rate of PCNA positive cells in the distraction gap had a tendency of decrease from 35.1-68.8% initially, to 49.1%, and finally to 17.6-27.2%. But at the final period, the tissue of the elongated gap still had the ability of cell proliferation. On the other hand, the expression of PCNA positive cells in the control side were negligible through the experimental period. 4. PCNA positive cells were observed primarily both at the central fibrous zone and at the region of just adjacent to CFZ which initiated new bone formation. 5. The expression pattern of the type I collagen was not zone-specific. They were observed diffusely throughout the elongation gap. 6. The predominant mechanism of new bone formation in the distraction gap was intramembranous. But, some of the regenerated bone was formed by endochondral ossification.

  • PDF

물리적 제어기술이 Aspergillus ochraceus 저감화에 미치는 영향 (Effect of Physical Control Technology on Aspergillus ochraceus Reduction)

  • 이은선;김종희;김부민;오미화
    • 한국식품위생안전성학회지
    • /
    • 제36권5호
    • /
    • pp.447-453
    • /
    • 2021
  • 본 연구는 식품 생산 환경에서 A. ochraceus를 저감하기 위하여 물리적 제어기술인 광살균(LED, UV), 열수 처리를 통하여 그 효과를 확인하고자 하였다. 이를 위하여 A. ochraceus 포자 현탁액(107-8 spore/mL)를 스테인리스 칩에 1 mL 접종하고 37℃에 건조한 후 각각의 물리적 처리에 적용하였다. LED를 활용하여 30분, 1, 2, 5, 8, 11시간 처리하였으나 균수에서 유의적인 차이를 확인하지 못하였으나 UV-C와 열수침지에서는 모두 A. ochraceus가 유의적으로 감소하였다. UV-C를 단독으로 스테인리스 칩에 360 kJ/m2까지 조사한 결과 A. ochraceus가 1.27 log CFU/cm2 까지 유의적으로 감소한 것을 확인하였다. 열수 처리에서는 가장 고온인 83℃에서 5분간 침지할 경우 A. ochraceus 초기 접종농도인 6.49 log CFU/cm2를 모두 사멸 시켰다. 그러나 고온의 열에너지를 5분간 현장에서 유지하는 것이 쉽지 않으므로 경제성과 사용 적합성 등을 고려하여 비교적 저온인 60℃와 자외선을 복합처리 하여 적절한 저감 조건을 확인하고자 하였다. 복합처리 결과 미온수에서도 침지시간 증가와 UV-C 조사량 증가에 따라 유의적으로 감소하여 불검출되었다. 이러한 결과들을 바탕으로 미온수인 60℃ 물에 작업도구 등을 침지하여 3분간 침지한 후 10분 이상 UV 살균처리 장치에 비치하여 둔다면 작업 중 A. ochraceus가 식품으로 교차오염되는 가능성을 줄일 수 있을 것으로 예상된다.

실체적 인터페이스 디자인 시스템에 관한 연구 - 텐저블즈의 설계 및 프로토타입 구현을 중심으로 - (A Study on the Tangible Interface Design System -With Emphasis on the Prototyping & Design Methods of Tangibles -)

  • 최민영;임창영
    • 디자인학연구
    • /
    • 제17권2호
    • /
    • pp.5-14
    • /
    • 2004
  • 기술의 발전과 HCI에 대한 연구 등으로 예전에는 생각할 수 없을 만큼 컴퓨터는 손쉽게 접근할 수 있게 되었고, 이러한 변화는 컴퓨팅을 우리가 살고 있는 실세계로 옮겨오게 되었으며, 실체적 인터페이스에 대한 관심이 높아지고 있다. 실체적 사용자 인터페이스(TUI)는 빛, 소리, 공기 및 물의 흐름과 같은 것을 미디어로 이용하여 인간 지각의 주변에 있는 물체를 사용자가 인지할 수 있게끔 한다. 실체적 사용자 인터페이스 시스템은 디지털 비트에 구현된 실체화된 물리적 물체이며, 이것은 물론 만져지는 인터페이스(Graspable UI)의 특징을 가지고 있다. 그리고 다양한 물리적 물체를 입력에 사용하고 있다. 그러나 여기서 실체적 인터페이스의 핵심을 이루는 텐저블즈는 단순한 입력 장치만이 아니라 시스템의 모델을 구체적으로 형상화하는 전체 시스템을 의미한다. 텐저블즈의 물리적형상은 단순히 손으로 잡기 위한 실체가 아니라 시스템의 개념적 모델을 형상화한 실체이다. 사용자는 시스템의 물리적 형태를 통하여 시스템을 이용하고 이를 통하여 입력을 위한 액션을 취한다. 이러한 사용자의 액션에 대한 반응에 대해 시스템은 리액션을 취하게 되는데 사용자는 디지털적인 반응(사운드, 그래픽 정보)뿐만 아니라 텐저블즈의 형태, 위치 등의 물리적 속성 역시 리액션(Reaction)으로 받아들이게 된다. 본 연구는 텐저블즈의 물리적 형상과 물리적 속성 등, 인터랙션 과정에 영향을 미치게 되는 요소와 사용자 반응과 시스템의 리액션에 대한 연구를 다루고 있다.

  • PDF

경주 서악리 삼층석탑의 훼손상태 및 보존처리 (Deterioration and Conservation Treatment of the Three Storied Stone Pagoda in Seoak-ri, Gyeongju)

  • 이명성;정민호;정영동;이찬희
    • 보존과학회지
    • /
    • 제18권
    • /
    • pp.63-74
    • /
    • 2006
  • 경주서악리 삼층석탑의 모든 부재는 정동이 잘 발달된 중립질의 회백색 알카리 화강암으로 구성되어 있다. 이 석탑은 이미 보수되어 전체적으로 안정감을 주며 상륜부를 제외하면 거의 원형을 보존하고 있다. 그러나 석탑에 직접적인 영향을 가하는 주변의 수목과 지반에 서식하는 잔디의 영향으로 지대석과 기단부 및 옥개석의 상부에는 지의류를 비롯한 미생물의 서식이 심각한 상태이다. 따라서 보존처리는 일차 건식세정을 실시하였고 이차로 습식세정을 실시하였다. 이때 잘 제거되지 않는 지의류 및 오염물 등은 고온스팀을 이용하여 제거하였다. 또한 이미 보수에 사용되었던 콘크리트와 에폭시 수지를 제거를 하고 에폭시계 합성수지에 탈크와 알카리 화강암 파우더 등의 충전제를 혼합하여 복원하였다. 부재들의 질감을 맞추기 위해 합성수지와 충전제의 혼합과정에서 색 맞춤을 하였다. 또한 석탑의 동쪽에 있는 사면으로부터 흘러내리는 빗물의 유입을 최소화하기 위해 배수로를 설치하였으며, 석탑주변에 서식하고 있는 수목 및 잔디를 제거하여 습기 발생을 최소화함으로서 향후지의류의 발생을 억제시키고자 하였다.

  • PDF

$SiN_x$/고분자 이중층 게이트 유전체를 가진 Zinc 산화물 박막 트랜지스터의 저온 공정에 관한 연구 (Study on the Low-temperature process of zinc oxide thin-film transistors with $SiN_x$/Polymer bilayer gate dielectrics)

  • 이호원;양진우;형건우;박재훈;구자룡;조이식;권상직;김우영;김영관
    • 한국응용과학기술학회지
    • /
    • 제27권2호
    • /
    • pp.137-143
    • /
    • 2010
  • Oxide semiconductors Thin-film transistors are an exemplified one owing to its excellent ambient stability and optical transparency. In particular zinc oxide (ZnO) has been reported because It has stability in air, a high electron mobility, transparency and low light sensitivity, compared to any other materials. For this reasons, ZnO TFTs have been studied actively. Furthermore, we expected that would be satisfy the demands of flexible display in new generation. In order to do that, ZnO TFTs must be fabricated that flexible substrate can sustain operating temperature. So, In this paper we have studied low-temperature process of zinc oxide(ZnO) thin-film transistors (TFTs) based on silicon nitride ($SiN_x$)/cross-linked poly-vinylphenol (C-PVP) as gate dielectric. TFTs based on oxide fabricated by Low-temperature process were similar to electrical characteristics in comparison to conventional TFTs. These results were in comparison to device with $SiN_x$/low-temperature C-PVP or $SiN_x$/conventional C-PVP. The ZnO TFTs fabricated by low-temperature process exhibited a field-effect mobility of $0.205\;cm^2/Vs$, a thresholdvoltage of 13.56 V and an on/off ratio of $5.73{\times}10^6$. As a result, We applied experimental for flexible PET substrate and showed that can be used to ZnO TFTs for flexible application.

다공질 실리콘: 새로운 마이크로센서 및 마이크로액추에이터 재료 (Porous silicon : a new material for microsensors and microactuators)

  • 민남기;이치우;정우식;김동일
    • 전기화학회지
    • /
    • 제2권1호
    • /
    • pp.17-22
    • /
    • 1999
  • 다공질 실리콘을 이용한 마이크로센서와 마이크로액츄에이터의 연구는 현재 초기단계에 있기 때문에, 지금까지 발광 다이오드나 화학 센서 등과 같은 몇몇 응용 소자가 발표된 수준에 머물러 있다. 본 논문에서는 화학 센서와 광소자를 중심으로 다공질 실리콘 센서 및 액추에이터 연구현황을 고찰 보고하고자 한다. 정전용량형 다공질 실리콘 습도센서의 감습 특성은 비선형이였으며, 저습보다는 $40\%RH$ 이상의 고습영역에서 더 높은 감도를 나타내었다. 다공질 실리콘 $n^+-p-n^+$ 소자는 에탄올에 노출되었을 때 소자 전류가 급격히 증가하였다. 다공질 실리콘 다이어프램에 제작된 $p^+-PSi-n^+$ 다이오드는 광 스위칭 현상을 나타내어 광센서 또는 광스위치로써의 응용 가능성을 보여주었다. 다공질 실리콘에 365nm를 조사해서 얻어진 광루미네센스(PL)는 넓은 스펙트럼을 보였으며, 피크 파장은 610 nm이었다. ITO/PSi/In LED의 전계발광(EL)스펙트럼은 PL에 비해 약간 더 넓은 영역에 걸쳐 나타났으며, 피크 에너지가 단파장(535nm)으로 이동하였다.

Geiger Mode로 동작하는 3차원 LADAR 광수신기 개발 (3-Dimensional LADAR Optical Detector Development in Geiger Mode Operation)

  • 최순규;신정환;강상구;홍정호;권용준;강응철;이창재
    • 한국광학회지
    • /
    • 제24권4호
    • /
    • pp.176-183
    • /
    • 2013
  • 본 논문에서는 3차원 영상 획득을 위한 LADAR(LAser Detection And Ranging)용 광수신기 모듈을 설계-제작하고 측정한 결과를 보고한다. 광수신기 모듈은 1 km 이상의 거리에서도 신호를 측정할 수 있도록 디지털모드(Geiger Mode)에서 동작하는 InGaAs APD(Avalanche Photodiode)로 설계하였으며, $16{\pm}16$ FPA(Focal Plane Array)로 설계-제작하였다. 디지털모드(Geiger Mode)는 항복전압 이상의 영역에서 동작하여 작은 광에 대해 반응 할 수 있게 큰 증폭률을 가지게 된다. 1ns의 FWHM(Full Width at Half Maximum)을 갖는 펄스를 수광할 수 있고, 배열 크기는 $16{\pm}16$, Geiger Mode 동작 등의 특성을 만족하도록 광수신기를 구성하기 위해 ROIC(Read Out Integrated Circuit)를 자체적으로 설계-제작하였다. 제작된 광수신기 모듈은 원거리 표적정보 획득이 가능하며, PDE(Photon Detection Efficiency)는 28%, DCR(Dark Count Rate)은 140 kHz 이하의 특성을 보였으며, LADAR 시스템에서 3차원 영상을 획득하였다. 이는 $16{\pm}16$ FPA APD를 이용한 광수신기에서 가장 우수한 특성을 나타낸 것이다.

공연장에서 다중 몰입도 측정을 위한 시스템 개발 (System Development for Measuring Group Engagement in the Art Center)

  • 류준모;최일영;최이권;김재경
    • 지능정보연구
    • /
    • 제20권3호
    • /
    • pp.45-58
    • /
    • 2014
  • 몰입은 관람객이 콘텐츠를 관람할 때 관람객들이 콘텐츠에 몰두하고 있는 심리적 상태를 의미하는 것으로, 관람객의 몰입경험은 콘텐츠의 만족도에 긍정적인 영향을 미친다. 따라서 공연 같은 콘텐츠를 제공하는 기업들은 콘텐츠의 흥행을 위해 관람객의 몰입도를 측정하는 것은 매우 중요하다. 설문 등의 표본조사 방법을 통해 관람객의 몰입도를 측정 연구는 방송분야 등 에서 널리 사용되고 있다. 이러한 몰입도 측정방법은 콘텐츠 관람 이후 설문을 실시하기 때문에 몰입도를 실시간으로 측정할 수 없을 뿐만 아니라 몰입도 측정의 정확성이 저하되는 문제 등이 있다. 이러한 문제를 해결하기 위하여 생리적 반응이나 얼굴 표정 분석, 그리고 움직임 관찰 방법 등을 이용하여 몰입도를 측정하는 연구가 수행되고 있다. 생체 신호를 이용하여 몰입도를 측정하는 연구의 경우, 1인을 대상으로 생체신호를 측정할 뿐만 아니라, 많은 데이터 처리 시간과 비용이 소모되는 단점이 있어 많은 관람객이 관람하는 공연장에 적용하기에는 한계가 있다. 얼굴 표정인식 통해 몰입도를 측정하는 경우도 1인을 대상으로 하고 있으며, 밝은 조명의 실험실 환경에서만 가능하다는 단점이 존재한다. 또한 관람객들의 움직인 동기화를 이용하여 몰입도를 특정한 연구는 다중관객을 대상으로 하였지만, 이는 실험실 환경에 한정하여 적용된 사례이다. 따라서 본 연구에서는 공연장, 시사회관 등 많은 관람객들이 콘텐츠를 관람하는 실제 환경에서 다중관람객이 다중몰입도의 정량적 평가를 위한 시스템을 설계하고 개발하였다. 제안된 시스템은 외부장치, 서버, 내부장치 등의 3부분으로 구성되어 있다. 서울시 마포구 상암동에 위치한 DMC 홍보관에 상설 전시장으로 운영하고 있으며, 관람객들을 대상으로 데이터를 획득하고 있다. 제안하고 있는 시스템을 활용하면 콘텐츠의 어느 구간에서 관객들이 몰입을 하고 있는지, 어느 구간에서 몰입을 하고 있지 못한지 분석가능하기 때문에, 향후 콘텐츠 제작 및 마케팅에 유용하게 활용할 수 있을 것으로 기대된다.

항공(航空) 자유화(自由化)와 '단일(單一)' 유럽항공시장(航空市場) 접근(接近);유럽사법재판소(司法裁判所)의 미(美) ${\cdot}$ 독(獨) 항공운수협정(航空運輸協定)상 '국적요건(國籍要件)' 조항(條項)의 공동체법(共同體法)상 '내국민대우(內國民待遇)' 규정 위반(違反) 관련 '집행위원회(執行委員會) 대(對) 독일연방(獨逸聯邦)' 사건 판결(判決)(2002)의 문제점을 중심으로 ('Open Skies' Agreements and Access to the 'Single' European Sky;Legal and Economic Problems with the European Court of Justice's Judgment in 'Commission v. Germany'(2002) Striking Down the 'Nationality Clause' in the U.S.-German Agreement)

  • 박현진
    • 한국항공운항학회지
    • /
    • 제15권1호
    • /
    • pp.38-53
    • /
    • 2007
  • In a seminal judgment of November 2002 (Case C-476/98) relating to the compatibility with Community laws of the 'nationality clause' in the 1996 amending protocol to the 1955 U.S.-German Air Services Agreement, the European Court of Justice(ECJ) decided that the provision constituted a measure of an intrinsically discriminatory nature and was thus contrary to the principle of national treatment established under Art. 52 of the EC Treaty. The Court, rejecting bluntly the German government' submissions relying on public policy grounds(Art. 56, EC Treaty), seemed content to declare and rule that the protocol provision requiring a contracting state party to ensure substantial ownership and effective control by its nationals of its designated airlines had violated the requirement of national treatment reserved for other Community Members under the salient Treaty provision. The German counterclaims against the Commission, although tantalizing not only from the perusal of the judgment but from the perspective of international air law, were nonetheless invariably correct and to the point. For such a clause has been justified to defend the 'fundamental interests of society from a serious threat' that may result from granting operating licenses or necessary technical authorizations to an airline company of a third country. Indeed, the nationality clause has been inserted in most of the liberal bilaterals to allow the parties to enforce their own national laws and regulations governing aviation safety and security. Such a clause is not targeted as a device for discriminating against the nationals of any third State. It simply acts as the minimum legal safeguards against aviation risk empowering a party to take legal control of the designated airlines. Unfortunately, the German call for the review of such a foremost objective and rationale underlying the nationality clause landed on the deaf ears of the Court which appeared quite happy not to take stock of the potential implications and consequences in its absence and of the legality under international law of the 'national treatment' requirement of Community laws. Again, while US law limits foreign shareholders to 24.9% of its airlines, the European Community limits non-EC ownership to 49%, precluding any ownership and effective control by foreign nationals of EC airlines, let alone any foreign takeover and merger. Given this, it appears inconsistent and unreasonable for the EC to demand, $vis-{\grave{a}}-vis$ a non-EC third State, national treatment for all of its Member States. The ECJ's decision was also wrongly premised on the precedence of Community laws over international law, and in particular, international air law. It simply is another form of asserting and enforcing de facto extraterritorial application of Community laws to a non-EC third country. Again, the ruling runs counter to an established rule of international law that a treaty does not, as a matter of principle, create either obligations or rights for a third State. Aside from the legal problems, the 'national treatment' may not be economically justified either, in light of the free-rider problem and resulting externalities or inefficiency. On the strength of international law and economics, therefore, airlines of Community Members other than the designated German and U.S. air carriers are neither eligible for traffic rights, nor entitled to operate between or 'free-ride' on the U.S. and German points. All in all and in all fairness, the European Court's ruling was nothing short of an outright condemnation of established rules and principles of international law and international air law. Nor is the national treatment requirement justified by the economic logic of deregulation or liberalization of aviation markets. Nor has the requirement much to do with fair competition and increased efficiency.

  • PDF

큰느타리(새송이)버섯 스마트팜 재배를 통한 생육환경 분석 및 자실체 품질 특성 (Analysis of the growth environment and fruiting body quality of Pleurotus eryngii cultivated by Smart Farming)

  • 김길자;김다미;안호섭;최진경;김선곤
    • 한국버섯학회지
    • /
    • 제17권4호
    • /
    • pp.211-217
    • /
    • 2019
  • 최근 ICT기반 스마트팜이 급속도로 증가추세이다. 버섯의 생육환경요인은 온도, 습도, CO2, 광이 주 요인이지만 그동안 온도 위주의 자동제어가 사용되어왔다. 큰느타리버섯의 생육환경 조절은 온도는 자동제어하지만 가습과 환기는 경험을 기준으로 한 타이머 사용을 하고 있었다. 이에 본 연구에서는 온도, 습도, 환기까지 자동제어를 통해 큰느타리버섯의 1세대 스마트팜 모델을 설정하기 위한 시험을 진행하였다. 환경제어시스템 및 모니터링 장비를 설치 한 후 기존의 방법으로 재배하고 있는 상태에서 생육실의 조건과 자실체의 생육조사를 실시하였으며 그 결과를 소개하고자 한다. A농가의 경우 온도는 약 17℃에서 발이시키고 자실체 생육기에는 약 16도로 관리하였다. 습도는 초기 95%로 유지하다가 초발이 이후에는 가습을 하지 않는 경향이었다. CO2 관리는 센서도 없었으며 갓과 대의 모양을 보면서 관행적으로 환기하고 있었고 700 ppm에서 최고 2,500 ppm까지 유지하는 경향이었다. 이 농가의 자실체 품질은 평균 개체중 125 g, 대굵기 53 mm, 대길이/대굵기 비율은 1.8, 갓직경/대굵기 1.25 수준으로 A등급(특품)~B등급(상품) 사이에 해당하였다. B농가의 경우는 온도는 약 19~17℃에서 발이시키고 자실체 생육기에는 약 17℃로 관리하였고 생육후기에는 13~15℃였다. 습도는 83~95%로 육안관찰하면서 관행적으로 조절하는 경향이었다. CO2 관리는 센서는 있었으나 제어는 하지 않았고 갓과 대의 모양을 보면서 관행적으로 환기하고 있었고 640 ppm에서 최고 4,500 ppm까지 유지하는 경향이었다. 이 농가의 자실체 형태는 평균 개체중 102 g, 대굵기 48 mm, 대길이/대굵기 비율은 2.2, 갓직경/대굵기 1.2 수준이었다. 이러한 결과는 환경조건 특히 CO2 농도에 따라 큰느타리버섯의 품질이 결정됨을 알 수 있었으며 A농가의 환경조절 방법을 개선하면서 DB화하면 정밀한 스마트팜 모델로 적용할 수 있을 것으로 기대된다.