• 방송공학회논문지
• /
• 제21권4호
• /
• pp.538-551
• /
• 2016

방송 제작현장에서는 영상 이미지 표현의 광원으로 Tungsten Halogen 광원이 주 광원으로 사용 되어 왔다. Tungsten Halogen 광원은 그동안 개발된 다른 광원보다 태양광원과 유사한 색 재현성으로 각광받아 왔지만 에너지 효율성의 문제점을 가지고 있었다. 최근 대체 광원으로 고효율의 에너지와 긴 수명의 LED광원이 방송 광원으로 주목받기 시작했다. LED광원은 독특한 발광원리 때문에 카메라를 통한 영상 이미지의 색 재현성과 광원에서 투사되는 빛의 질에 있어서 Tungsten Halogen광원과 다른 특성을 가지고 있다. 이런 특성은 LED광원이 방송 광원으로서 도입이 늦어지는 이유이다. 이에 본 연구에서는 LED 광원의 색 재현성과 빛의 질 특성인 평탄도를 측정하여 기준광원인 Tungsten Halogen과 비교하여 방송 광원으로써의 적합성에 대한 실험 데이터를 제시할 것이다. 또한 LED광원이 방송 광원으로서의 확산되기 위해서 필요한 점이 무엇인지 향후 과제와 기준을 제시하고자 한다.

• 한국의류산업학회지
• /
• 제8권6호
• /
• pp.721-726
• /
• 2006

In this article I visually assessed the relation between luminous source and color, and analyzed subjective recognition of color by light source and image of color, aiming at giving guidelines in selecting source of light suitable for each purpose, thereby contributing to enhanced quality of life. For this purpose, I subjectized, by applying a quantitative method, the objective measurement that employs sensory evaluation method for 14 categories of color, light and feelings in visual perception of textile colors (blue, green and yellow) by color of light source (color temperature of 2800K, 4200K and 6500K), Followings are the conclusions derived form this study. Colors of textile were differently perceived according to the color of light source. When examining common recognition of textiles in blue, green and yellow, 2800K was said to give dirty, soft and blurred image, as for 4200K clear, wide and fine feelings were said, and pure, vivid, refined and bright image were marked for 6500K. As for 2800K, it got the most low appraisals compared with others. In conclusion, image and feeling of the same colors can differ according to light source, which indicates the importance of appropriate selection of light source for purpose of use. As for yellow, the number of assessment result that shows significant difference was the smallest among the three colors. So, it can be concluded that when we consider the recognition of color in mixing different colors, mixing with yellow can result in difficulty in visually perceiving difference of colors. Therefore, it is regarded that more considerable attention is required when dealing with yellow color.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.415-419
• /
• 2010

A phosphor-conversion white light source is demonstrated using an InGaN-based blue laser diode (LD) and a yellow-emitting phosphor excited by the blue LD. The photometric and colorimetric properties of this blue-LD-based white light source are characterized. When injection current of the LD is 100 mA, luminous flux and luminous efficiency of the white light are found to be over 5 lm and 10 lm/W, respectively. When injection current is >90 mA, luminance is estimated to be larger than 10 Mcd/$cm^2$. In addition, color characteristics of the white light such as chromaticity coordinates, a correlated color temperature, and a color rendering index are found to be quite stable as current and temperature of the LD varies. The demonstrated LD-based white light source is expected to be used in high-brightness illumination applications with good color stability.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.18-26
• /
• 2009

최근, 에너지 절감 및 환경보전의 한 방법으로서 LED광원을 이용한 고효율 조명기기의 요구가 증가하고 있다. 그러나 LED광원을 이용한 조명기기는 실내공간의 용도 및 사용자에 대한 고려를 배제한 채, 색상 및 패턴이 결정되어 시각적 불쾌감을 초래하고 있다. 이에 본 연구는 LED광원을 이용한 국부조명의 CCT의 변화가 작업자의 시작업 성능에 미치는 영향을 분석하여 실내공간의 용도 및 사용자를 고려한 조명 설계에 기초자료를 제시하고자 한다. 본 연구를 위해 2 종류의 LED광원과 1종류의 형광광원을 선정하였으며, 대학생 30명을 대상으로 오류수정작업과 읽기작업에 대한 정확도 및 소요시간을 평가하였다. 시작업 성능평가 결과, LED광원에서 오류수정 작업의 정확도는 형광광원에 비해 최대 2.5[%]가 증가되었으며, 소요시간은 최대 17.1[%]가 감소되었다. 또한 읽기작업 결과 소요시간은 LED광원에서 20.6[%]가 감소하였다.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.31-36
• /
• 2011

LED is expected as an environmentally friendly next generation light source with its good reliability and long lifetime. The light sources for illumination have a variety of applications in the indoor and outdoor, and the variation of optical power and color rendering of the light source limits their applications. Therefore, it is necessary to research the LED lamp and its luminaire to minimize the variation of dynamic characteristics and to improve the color rendering due to that illuminating environment. Daylight is very good light source to human and can be used as primary or a secondary light source with benefits of energy, productivity and health.This paper presents the design method of LED lighting system to improve poor property in terms of CR(color redering) characteristic to use daylight effectively.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권4호
• /
• pp.49-54
• /
• 1995

This paper is an experimental study on the influence of the demonstration effect by color and light source in show window. This experiment used semantic differentical method in model show window of actual size. The important outcomes of this study are summarized below. 1. In the result by factor analysis, three factors are classified. They are diversity, emotion, lightness. 2. In the study on the influence by light source, incandescence lamp is the most effective light source in every items. 3. In the result of the study on the influence by color source, according to each factor bring out following result ; Green is the most effective in diversity factor and ligthness factor. Yellow is the most effective in emotion factor.

• 대한치과보철학회지
• /
• 제16권1호
• /
• pp.38-44
• /
• 1978

Color is an important factor in dental esthetics. Application of natural tooth color will not fail to produce pleasing results. But a standardized method of shade matching has not been adopted. If we are to overcome the color matching problem in dentistry, an understanding of the nature of color and light is essential. The purpose of this study was to compare the effects of different light sources and different background colors on the ability of observers to correctly match shades of artifical teeth. And observation was made to determine if the time spent in making a shade match was a factor in the correctness of the response. A test method was devised and 50 individuals made observations which were recorded and analyzed. $X^2$-test gave results indicating that the time factor had no effect on the response made. An analysis of variance showed the following effects significant at the five percent level; (1) light source (2) background color (3) subject. The following conclusions can be drawn from this study; (1) The time spent in making shade selection is not a factor in the correctness of the selections. (2) The light source used is an important factor in matching tooth shade; and there is no significant difference between the light sources in shade matching. (3) Under the conditions of this study, the greatest accuracy in shade matching was obtained on the brown background.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.24-27
• /
• 2013

In this paper, we investigated the effect of luminescence properties of various concentrations of magnesium-doped ZnS:Mn phosphor excited by plasma luminescence device. The PL intensity was evaluated in the range of 300~500 nm excitation wavelengths. We found the highest PL intensity of the phosphors excited by 365 nm and 450 nm was observed at Mg concentrations of 1.4 wt% and 0.8 wt%, respectively. In addition, an emission peak was distinguished at 580 nm wavelength. With increasing Mg dopant level, enhanced PL intensity was observed, which is possibly applicable to color converting materials by blue emission for white light sources. Finally, we evaluated the luminance properties of color converting ZnS:Mn,Mg phosphors with plasma blue light source. the white luminance of plasma light source with CIE(0.36,0.26) was established by color converting phosphors of ZnS:Mn with 0.8 wt% Mg.

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.65-70
• /
• 1990

The phenomenon of color sensory has been mainly studied on the relation with the stimulus source of light source color according to dispersed energy of light. However, it has not been definitely found that the phenomenon of color sensory be collcerned with evoked potentials stimulated by object color. This paper proposes the method that evoked potentials stimulated by object colors are analyzed and examined on the phenomemon of color sensory. The model of evoked potentials is assumed that it is consisted of an additive noise and a transient signal caused by stimulus. The method which is used to estimate the signal is time-varying filtering.