• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.1
• /
• pp.31-43
• /
• 1982

Engineering phase of dairy housing systems has close connection with the milk produc- tivity of dairy cattle, the quality of milk, extension of dairy production systems, labor- saving in management of dairy cattle and the like. Moreover, the rate of investment of dairy housing facilities is of relatively high level, However, there has been almost no research effort for the improvement of engineering aspects of dairy housing systems in Korea. The purpose of this study is to find out general engineering problems and to recomm- end the improvement in dairy housing systems in Korea. Field survey by means of questionaire, direct measurements, taking pictures and sketching was conducted to get necessary information for the study. Kyung-ki Do region was firstly chosen for sampling area since it has included more than half of the number of dairy farms of the whole country. The results obtained are summarized as follows: 1. In overall dairy farm layout, the dwellings of workers were ignored in the light of sanitary environment 2. The layout of stalls in a dairy barn belongs mostly to the type of double-row face-out, which is compatible with the emphasis of manure disposal activities. 3. While the width and length of stalls were sufficiently close to the standard dimension, the width of mangers was much less than the standard dimension. 4. The width and depth of manure gutters and the width of working alleys were much. less than the standard dimension. 5. The mooring equipment was mostly in the classes of chain or rope. The watering equipment was not facilitated independantly except the one cese of using watercup. 6. The bucket milkers with one or two bucket milkers with the capacity of two cattles. each were used as milking equipment in most dairy farms. 7. There were only few milk rooms independently spaced from other space, in which the arrangement of milking equipment was much less than the standard condition. 8. The lounging ground area was averaged to be sufficient for the activity of dairy herd. 9. Silos for silage used during winter consisted of mostly bunker silos, trench silos and underground vertical silos. Ordinary vertical silos were considered for the farmers to be inconvenient for the labor saving. 10. From the view point of heat conservation and moisture removal within the dairy barns, windows were not flexible for the easy ventilation and ceiling part was not adequate for temperatur maintenance. 11. Waste treatment and disposal systems were not provided with most dairy farms, therefore the livestock waste pollution problems would be serious in the near future.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.23-31
• /
• 2015

With the expiration of main patent of printing method, public interest now has shifted to 3D printing. In this, it needs to shine a light on the negative effects, particularly in the socio-economic aspect of 3D printing. By analyzing the existing research findings, policy reports and press releases, the negative effects of 3D printing and its countermeasures were derived. The main drawbacks of 3D printing includes the following: It might cause 3D printing-related crimes(e.g. printed weapons, intellectual property infringement, etc.) and it poses a big threat to other related business sectors.(e.g. potential job loss in molding and medical equipments manufacturing industries) What's more, the nature of 3D printing that it is easy to operate attracts lots of people, which then leads to serious social and environmental problems-product liability, ethical issues, environmental pollution, and finally government's blindly excessive investment in 3D printing. To avoid such potential risks, the government should establish and enforce the institutional law, and guidelines. Government's rational investment decision is also inevitable for the short-term and long-term sustainability of 3D printing.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.224-232
• /
• 2012

Although evolution of construction materials brought about development of modern architecture, they caused destruction of the environment and pollution. This problem is not a new one in terms of ecological esthetics and materials of sustainable architecture in light of the Eastern view of nature and this idea became a background of this study. The basic concept is to try to find out their characteristics from a perspective of ecological esthetics in relation to traditional building materials that nature, architecture, and humans coexist and live with each other to balance. Based on ecological esthetics and precedent studies on materials of traditional architecture, we investigated connections, expressive methods and characteristics in traditional residential construction space. This attempt has meanings in that it can propose a new framework of forming various viewpoints and spatial perceptions in relation to esthetics and traditional construction materials. The current study examined the characteristics by dividing them into tangible and intangible elements based on expressive features of elements of nature. The characteristics found by this process are not simply notion of physical materials, but plays a key role aesthetically and ecologically. Nature and materials take circulation of the law of nature, regulate energy, increase efficiency and play a major role in an economic way. Nature in itself becomes natural alternative energy, and plays its role in an invisible fashion. It examined how expressive characteristics of construction materials are reflected through analyzing residential space and Korean traditional garden having relationships with Eastern viewpoint of nature in relation to Korean traditional construction materials from a perspective of ecological esthetics. Findings of the above study indicate that expressive characteristics of Korean traditional construction materials from a perspective of ecological esthetics are that nature, space, humans coexist and live together and they will provide a clue to an alternative to solve ecological and environmental problems modern society will have in the future. Through this process, it provided a possibility that traditional space and materials can be succeeded in creative and new ways, and it found out the way for nature, space, and humans to coexist and a possibility of ecological esthetics. It addition, it will provide a key base as an alternative of sustainable design of the future.

• Resources Recycling
• /
• v.8 no.4
• /
• pp.11-19
• /
• 1999

Fly ash generated from (he pulverized coal power plant have caused the serious ocean pollution due to the disposal in the ash pond, the life reduction of a power plant and the waste of re-utilizable resource The research to reuse the unburned carbon and mineral composing of the ash has been progressed. In this study. the physical and chemical characteristics of high grade ash and unburned carbon particles obtained from countercurrent column flotation are investigated. The cleaned ash of the less 0,5% loss on Ignition(LOI) in carbon content is a spherical sphere and 39.8${\mu}m$ in size of MMD(Mass Median Diameter). 2.22 $m^2/g$ of specific area. The morphology of high LOI carbon particles is a amorphousness, 76.6 ${\mu}m$ of particle size and 15.2 $m^2/g$ of specific The high grade cleaned ash and the high LOI ash have some difference in the light of physical. chemical and morphological characteristics

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.472-477
• /
• 2017

Oil spills cause a lot of damage to the environment. Oil destroys the water environment and ecosystem in a very short period of time once they are contaminated by it, it takes a lot of time to recover from the contamination and the cleaning process is very difficult. Therefore, oil detectors are greatly needed as they can monitor any oil spills over the sea, rivers, and lakes. There are two kinds of technology available for detecting oil, viz. the contact and non-contact types. The former is based on the use of the conductivity, capacitance and microwaves, while the latter employs infrared, UV, laser, optic and radar technologies. As there are also various hurdles in the measuring of oil on water, such as the presence of waves, refraction of light, temperature and saltiness, it is imperative to select the right oil detector which is appropriate for the specific environment. In this study, a contact type oil detector is developed, which can be used in oil related industries, such as refineries, petrochemical companies, and power generation stations. The detector is made up of the sensor module, which floats on the water, and the controller which processes the signal coming from the sensor module and displays it. It is designed in such a way that the existence of oil is detected through the sensor and the change in the permittivity is observed to determine the volume and type of spilled oil.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.9
• /
• pp.67-76
• /
• 2010

This paper proposes a image-based water level measurement method, which adapt to the ruler's surface condition. When the surface of a ruler is deteriorated by mud, drifts, or strong light reflection, the proposed method judges the pollution of ruler by comparing distance between two levels: the first one is the end position of horizontal edge region which keeps the pattern of ruler's marking, and the second one is the position where the sharpest drop occurs in the histogram which is construct using image density based on the axis of image height. If the ruler is polluted, the water level is a position of local valley of the section having a maximum difference between the local peak and valley around the second level. If the ruler is not polluted, the water level is detected as the position having horizontal edges more than 30% of histogram's maximum value around the first level. The detected water level is converted to the actual water level by using the mapping table which is construct based on the making of ruler in the image. The proposed method is compared to the ultrasonic based method to evaluate its accuracy and efficiency on the real situation.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.20-25
• /
• 1978

Research on the hormones of insect has followed by the special opportunities and problems arising from pollution. Since then, the main frame of it has been energetically exploited by ligation, decapitation and so on. In the meanwhile, knowledge of the biochemistry of hormone action as well as other aspects of biochemistry in insects has been gradually disclosed. Since 1966, practical use of active analogs of the hormones has been also worked out as an insecticide and brought the features of it to the light. On the other hand, it is expected to afford the increase of silk productivity resulted from control of the fifth larval period by delaying normal development. With these regards, some of analogs have been tried to apply practically to the silkworm. One of them is "Manta" produced by Zoecon Chemical Company and it is presently used for the increase of silk productivity in Japan. Another one is "R-20458", not registered one, issued by Stuffer Chemical Company. It is still pending for the silkworm growth regulator For the possibility of practical use, two chemicals are tested on the increase of silk productivity by topical application and the obtained results are summarized as follows. 1. It is evident that the fifth larval period was extended by topical application of the tested chemicals "Manta"and "R-20458"at the fifth instar after 51 hours of the last ecdysis, ranging from 12 hours to one day, as compared to. the control 2. In survival rates, there is no significance at 5% level between control and treatments. It proved that there was no toxity to silkworm by topical aprication. 3. There is an increase of cocoon yield in both chemical treatments. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control. In case of R-20458, the increasing rates were varied at the different concentration; 21.4kg of cocoon production with 5% increase at 5ppm, 20.9kg of it with 2% increase at 2.5ppm and 20.6kg of it with 1% increase at 1. 25ppm in index, respectively, as compared with that of control. 4. Percentage of cocoon shell was increased by topical application. In case of "Manta" 2.5ppm, it is 25.6% which is equal to 6% increase in index, as compared with that of control. For "R-20458", the increasing rates of percentage of cocoon shell were varied with the different level of chemical concentration. They are 25.0% of 4% increase at 2.5ppm, 24.9% of 3% increase at 1.25ppm and 24.7% of 3% increase at 5ppm. 15% increase was attained at "Manta" 2.5ppm in the weight of cocoon layer based on cocoon yield and percentage of cocoon shell in index, as compared with that of control. The rates for "R-20458"are 5% increase at 2.5ppm and 4% increase at 1. 25ppm in index.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.721-730
• /
• 2021

Maritime air pollutants around port cities have gained a great deal of attention due to their direct impacts on regional air quality. This study aims to determine the geographical properties of sea/land breezes in different areas to discover overall ranges of maritime emission dispersion. The HOTMAC-RAPTAD modeling program was used to simulate regional-scale air dispersion considering non-linear and unsteady states during the general summer period for the target areas of the Yellow Sea (Incheon Port and Pyeongtaek·Dangjin Ports), archipelago region (Mokpo Port), South and East Sea (Busan and Masan Ports) and East Sea with mountainous area (Donghae·Mukho Ports). The resulting dispersion lengths of vessel emissions into the onshore regions around the target ports shed light on portal air quality management, because vessel emissions from the Incheon, Mokpo, Busan, and Donghae·Mukho ports were transported 27-31km (Western Seoul), 21-24km (Southern Muan), 20-26km (Gimhae and Yangsan), and 22-25km (Taebeak Mountains), respectively. Therefore, the results of this study provide useful data for regional air quality management and marine air pollution mitigation to improve the sustainability of port cities.

• Clean Technology
• /
• v.26 no.4
• /
• pp.293-303
• /
• 2020

According to the World Health Organization (WHO), air pollution is a typical health hazard, resulting in about 7 million premature deaths each year. Sulfur dioxide (SO2) is one of the major air pollutants, and the combustion process with sulfur-containing fuels generates it. Measuring SO2 generation in large combustion environments in real time and optimizing reduction facilities based on measured values are necessary to reduce the compound's presence. This paper describes the concentration measurement for SO2, a particulate matter precursor, using a wavelength modulation spectroscopy (WMS) of tunable diode laser absorption spectroscopy (TDLAS). This study employed a quantum cascade laser operating at 7.6 ㎛ as a light source. It demonstrated concentration measurement possibility using 64 multi-absorption lines between 7623.7 and 7626.0 nm. The experiments were conducted in a multi-pass cell with a total path length of 28 and 76 m at 1 atm, 296 K. The SO2 concentration was tested in two types: high concentration (1000 to 5000 ppm) and low concentration (10 ppm or less). Additionally, the effect of H2O interference in the atmosphere on the measurement of SO2 was confirmed by N2 purging the laser's path. The detection limit for SO2 was 3 ppm, and results were compared with the electronic chemical sensor and nondispersive infrared (NDIR) sensor.

• Journal of Environmental Health Sciences
• /
• v.47 no.6
• /
• pp.540-547
• /
• 2021

Background: Indoor air pollutants are caused by a number of factors, such as coming in from the outside or being generated by internal activities. Typical indoor air pollutants include nitrogen dioxide and carbon monoxide from household items such as heating appliances and volatile organic compounds from building materials. In addition there is carbon dioxide from human breathing and bacteria from speaking, coughing, and sneezing. Objectives: According to recent research results, most indoor air pollution is known to be greatly affected by internal factors such as burning (biomass for cooking) and various pollutants. These pollutants can have a fatal effect on the human body due to a lack of ventilation facilities. Methods: We fabricated a polydopamine (PDA) layer with Ti substrates as a coating on supported glass fiber fabric to enhance its photo-activity. The PDA layer with TiO₂ was covalently attached to glass fiber fabric using the drop-casting method. The roughness and functional groups of the surface of the Ti substrate/PDA coated glass fiber fabric were verified through infrared imaging microscopy and field emission scanning electron microscopy (FE-SEM). The obtained hybrid Ti substrate/PDA coated glass fiber fabric was investigated for photocatalytic activity by the removal of ammonia and an epidermal Staphylococcus aureus reduction test with lamp (250 nm, 405 nm wavelength) at 24℃. Results: Antibacterial properties were found to reduce epidermal staphylococcus aureus in the Ti substrate/PDA coated glass fiber fabric under 405 nm after three hours. In addition, the Ti substrate/PDA coated glass fiber fabric of VOC reduction rate for ammonia was 50% under 405 nm after 30 min. Conclusions: An electron-hole pair due to photoexcitation is generated in the PDA layer and transferred to the conduction band of TiO₂. This generates a superoxide radical that degrades ammonia and removes epidermal Staphylococcus aureus.