• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.25-34
• /
• 2019

최근, 출력전압의 제어가 가능하고 양방향 운용이 가능한 PWM(Pulse Width Modulation) 정류기가 도입되고 있다. 그러나, PWM 정류기가 적용될 경우, 전력계통측에서 사고발생하면, 회생전력에 의한 사고전류 공급으로 기존의 사고전류 크기 및 방향이 바뀔 가능성이 있다. 또한, 경전철용 급전시스템에서는 장거리 지점에서 사고가 발생하는 경우, 사고전류의 크기가 크게 감소되고, 부하전류와 비슷하거나 더 작은 경우가 발생할 수 있기 때문에 이에 대한 적절한 보호협조 운용 방안이 필요한 실정이다. 따라서, 본 논문에서는 상기의 문제점들을 해결하기 위하여, 경전철용 LVDC 배전선로의 보호기기 운용 방안을 제안한다. 구체적으로는 LVDC 배전선로에서의 거리 및 단락저항별 사고특성을 분석하여, 다양한 조건에서 사고를 적절하게 판별하는 직류선택계전기의 보호협조 운용방안을 제안한다. 또한, 배전계통 상용 해석 프로그램인 PSCAD/EMTDC를 이용하여 AC 계통, PWM 정류기, LVDC 배전선로로 구성된 경전철용 급전시스템의 모델링을 제시한다. 한편, 제안한 보호협조 알고리즘과 모델링을 이용하여 LVDC 배전선로의 보호기기 특성을 분석한 결과, 제안한 운용방식에서는 전류 경사각의 급격한 감소를 판정하는 보호요소를 추가한다. 따라서, 사고지점의 단락저항이 높거나 장거리 선로인 경우에도, 보호기기가 사고전류와 부하전류를 적절히 판별할 수 있어, 본 논문에서 제안한 보호협조 운용알고리즘의 유용성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.737-742
• /
• 2015

This paper is designed to find out where power reaches the highest point as the load of solar cells varies. In addition, the current and power were measured when irradiation changes, and the correlation between current and power was investigated. On top of that, experiments were conducted with the light volume kept constant and with the incoming light angle changing in order to figure out the incoming light angle that produces the most power and to conduct analyses. It was ascertained that if the load increases, the current decreases and the voltage increases. Since the power of 0.9828[W] was the highest when measurements were done, it can be said that when a load of 30[%] is applied to the solar cells, they are the most efficient.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.2875-2893
• /
• 2015

Existing coding aware routing algorithms focused on novel routing metric design that captures the characteristics of network coding. However, in packet coding algorithm, they use opportunistic coding scheme which didn't consider the queue state of the coding node and are equivalent to the conventional store-and-forward method in light traffic load condition because they never delay packets and there are no packets in the output queue of coding node, which results in no coding opportunity. In addition, most of the existing algorithms assume that all flows participating in the network have equal rate. This is unrealistic since multi-rate environments are often appeared. To overcome above problem and expand network coding to light traffic load scenarios, we present an enhanced coding-aware routing algorithm based on queue state and local topology (OQMCAR), which consider the queue state of coding node in packet coding algorithm where the control policy is of threshold-type. OQMCAR is a unified framework to merge single rate case and multiple rate case, including the light traffic load scenarios. Simulations results show that our scheme can achieve higher throughput and lower end-to-end delay than the current mechanisms using COPE-type opportunistic coding policy in different cases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.165-182
• /
• 2024

Grouted sleeve splice (GSS) is an effective type of connection applied in the precast concrete structures as it has the advantages of rapidly assembly and reliable strength. To decrease the weight and cost of vertical rebar connection in precast shear walls, a light-weight sleeve is designed according to the thick-cylinder theory. Mechanical behaviour of the light-weighted GSS is investigated through experimental analysis. Two failure modes, such as rebar fracture failure and rebar pull-out failure, are found. The load-displacement curves exhibit four different stages: elastic stage, yield stage, strengthening stage, and necking stage. The bond strength between the rebar and the grout increases gradually from outer position to inner position of the sleeve, and it reaches the maximum value at the centre of the anchorage length. A finite element model predicting the mechanical properties of the light-weighted GSS is developed based on the Concrete Damage Plasticity (CDP) model and the Brittle Cracking (BC) model. The effect of the rebar anchorage length is significant, while the increase of the thickness of sleeve and the grout strength are not very effective. A model for estimating ultimate load, including factors of inner diameter of sleeves, anchorage length, and rebar diameter, is proposed. The proposed model shows good agreement with various test data.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.303-309
• /
• 1999

The fretting wear behaviour of Zircaloy-4 tube used as the fuel rod cladding in PWR nuclear power plants has been investigated at the different test environment, in light water and in air as a function of slip amplitude, normal load, test duration and frequency. Zircaloy-4 tubes were used for both of oscillating and stationary specimens. A fretting wear tester was designed to be suitable for this fretting test. The wear volume and specific wear rate of Zircaloy-4 tube in water were greater than those in air under various slip amplitude. It was found that delaminate debris and surface cracks were observed at low slip amplitude and high load in water Experimental results showed that the light water accelerated the wear of Zircaloy-4 tube at low slip amplitude in fretting.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.88-94
• /
• 1998

The fretting wear characteristics of Zircaloy-4 tube in light water were investigated experimentally. A fretting wear tester was designed to be suitable for this fretting test. This study was focused on the effects due to the combination of normal load, slip amplitude and number of cycles as the main factors of fretting. The results of this study showed that the wear volume increased abruptly at slip amplitude above 100 ${\mu}{\textrm}{m}$, which is defined as critical slip amplitude of Zircaloy-4 tube in light water, and that under 160 ${\mu}{\textrm}{m}$ the wear volume decreased as load increased at the same slip amplitude.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.40-50
• /
• 2000

In this study, as a means of increasing engine power, turbocharging was applied to the gasoline engine of a light passenger car which was originally naturally aspirated. Also the catalytic convertor was applied to improve the exhaust emission characteristics. The comparison of the performance characteristics between the burbocharged engine with catalytic convertor and the naturally aspirated engine was made over the wide range of operating conditions. The results showed considerable increase of the output performances at full load condition by trubocharging while slight losses were observed at part load conditions.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.55-63
• /
• 1998

The fretting wear characteristics of Zircaloy-4 tube in light water were investigated experimentally. A fretting wear tester was designed to be suitable for this fretting test. This study was focused on the effects due to the combination of normal load, slip amplitude and number of cycles as the main factors of fretting. The results of this study showed that the wear volume increased abruptly at slip amplitude above 100$\mu$m, which is defined as critical slip amplitude of Zircaloy-4 tube in light water, and that under 160$\mu$m the wear volume decreased as load increased at the same slip amplitude.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.159-166
• /
• 1999

In this paper, running performance analyses of an articulated light rail vehicle are carried out using VAMPIRE software package. The stability analysis to determine the critical speed and the safety analysis such as derailment coefficients, lateral forces of wheels and reduction of wheel load are carried for the track conditions of straight, transition and curving range to the operating velocity of 40km/h. Also, ride quality is analyzed. As the results of analysis, the safety of light rail vehicle satisfied with the limit values and the ride quality for tare and full load condition was shown to the "not uncomfortable" level in ISO 2631-1 (1997) criteria.