DOI QR코드

DOI QR Code

Fretting Wear Characteristics of Zircaloy-4 Tube in Light Water

경수중에서 지르칼로이-4 튜브의 프레팅 마멸특성

  • 조광희 (경북대학교 기계공학과 대학원) ;
  • 노규철 (경북대학교 기계공학과 대학원) ;
  • 김석삼 (경북대학교 기계공학부) ;
  • 조성재 (한국표준과학연구원 소재특성평가센터)
  • Published : 1998.12.01

Abstract

The fretting wear characteristics of Zircaloy-4 tube in light water were investigated experimentally. A fretting wear tester was designed to be suitable for this fretting test. This study was focused on the effects due to the combination of normal load, slip amplitude and number of cycles as the main factors of fretting. The results of this study showed that the wear volume increased abruptly at slip amplitude above 100 ${\mu}{\textrm}{m}$, which is defined as critical slip amplitude of Zircaloy-4 tube in light water, and that under 160 ${\mu}{\textrm}{m}$ the wear volume decreased as load increased at the same slip amplitude.

Keywords

References

  1. Japaneese Society of Mechanical Engineers v.44 no.378 The Effects of Slip Amplitude and Load in Fretting Wear Iwabuchi, A.
  2. Proc. Roy. Soc. Lond., Ser.A v.236 The Fretting Corrosion of Mild Steel Halliday, J. S.;Hirst, W.
  3. J. Appl. Mech. v.21 Feng, I. Ming;Uhlig H. H.
  4. ASTM, Spec. Tech. Pub. no.144 Uhlig, H. H.
  5. Wear v.219 Fretting Wear Characteristics of Zircaloy-4 Tube Cho, K. H.;Kim, T. H.;Kim, S. S.
  6. Journal of Pressure Vessel Technology v.117 Experimental Fretting Wear Studies of Steam Generator Materials Fisher, N. J.;Chorv, A. B.;Weckwerth, M. K.
  7. Journal of Pressure Vessel Technology v.101 Experimental Studies of Tube Frettings in S/G and Heat Ex. Ko, P. L.
  8. Wear v.126 On Fretting Maps Olof Vingsbo
  9. Journal of Tribology v.118 Evaluation of Fretting Damage of Zircaloy Cladding Tubes Olof Vingsbo;Ali R. Massih;Stig Nilsson
  10. 영광 원자력발전소 3,4호기 최종안전분석보고서(YGN 3,4 FSAR) 제4,2,3조 Design Evaluation 영광 원자력발전소
  11. J. Am. Ceram. Soc. v.79 no.5 Effects of Grain Size and Humidity on Fretting Wear in Fine-Grained Alumina, Al₂O₃/TiC, and zirconia Krell, A.;Klaffke, D.
  12. Transactions of the ASME v.117 Elevated Temp. Wear Maps of X40 and Mar-M247 Alloys Yoshiyuki Saito;Kazuaki Mino