• Journal of ILASS-Korea
• /
• v.29 no.1
• /
• pp.16-22
• /
• 2024

The EU (European Union) was introduced Euro-6e in 2023. Recently, the EU prepare to introduce Euro-7. One of difference Euro-6e and Euro-7 is test route condition. This study developed 5 test routes that have different characteristics and severity. The severity of test routes was made by traffic and road gradient. And this study was conducted RDE test on 5 test routes for Light-Duty diesel vehicle (Euro-6d). Based on the test results, the emission characteristics of CO₂ and NOx were analyzed according to the severity of the test routes. Especially, 4 test routes were satisfied normal driving condition of Euro-7 and other test route was satisfied extended driving condition of Euro-7.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.1
• /
• pp.19-23
• /
• 2000

The experiment was carried out to investigate the influence of light condition and polarity of explant on adventitious shoot formation from cotyledon of apple in vitro The treatment of light culture after 10days dark treatment showed effective result than other treatments on the rate of adventitious shoot formation on light intensity treatments and also the treatment of blue light treatment after 4days dark treatment showed more effective result than other treatments in light quality treatments. The polarity of explant influence on adventitious shoot formation. Adventitious multiple shoot formation occured at the proximal end of an excised cotyledon. In other words. shoot organogenesis occured at the proximal cut surfaces of both proximal and distal explants rather than at the distal cut surface of proximal explants.

• Korean Journal of Plant Resources
• /
• v.7 no.1
• /
• pp.73-76
• /
• 1994

This study was carried out to investigate the morphological craracteristics of seed and effect of Gibberellin and light in ffter rooter.The results obtained were summerized as follows :1, 000 seeds wt. was 1.9g, 1 liter wt. was 41.2g, seed length was 3.6mm, seed width was 1.1mm and seed thickness was 0.8mm.The germination rate was higher with light condition than dark and Gibberellin treatment waseffective.

• International Journal of Contents
• /
• v.2 no.3
• /
• pp.6-10
• /
• 2006

Small molecule OLED devices were fabricated and the electro-optical characteristics were analyzed. The luminance and color coordinate of the fabricated OLED device were $24,390cd/m^2$ and (x=0.15, y=0.22), respectively. Current efficiency of 6.8 cd/A and power efficiency of 2.4 lm/W were also obtained under DC operating condition. Transient light intensity was also measured by using Si photodiode.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.64-69
• /
• 1999

The effect of phytohormones, light and phosphate on in vitro production of ubiquinone 10 from the suspension cultures of Nicotiana tabacum cv. Xanthi callus was investigated. The inoculum size and cultured time in the suspension culture had to be at least over 2 % of medium volume at 15 days for the excellent growth of Xanthi callus. The growth of Xanthi callus in the suspension culture was improved by addition of NAA and 2,4-D, especially NAA 1.0mg/1 alone, at the light condition. The optimal concentration of phytohormone was 0.1 mg/l 2.4-D and 1.0 mg/l NAA for productivity of ubiquinone 10 in the suspenseion of Xanthi callus. Addition of 3mM KH$_2$PO$_4$ to the medium was more effective in promoting ubiquinone-l0 formation than other concentration in the light condition. Content and production of ubiquinone-l0 in the suspension cultures of Xanthi callus were the highest at the MS media containing 0.5mg/L kinetin, 0.5mg/L 2,4-D, 1.0mg/1 NAA, 3mM phosphate and 2 % inoculum in the light.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.45-55
• /
• 2018

It is usually difficult for dual-active-bridge (DAB) dc-dc converters to operate efficiently at light loads. This paper presents an in-depth analysis of a DAB with triple-phase-shift (TPS) control under the light load condition to overcome this problem. A kind of operating mode which is suitable for light load operation is analyzed in this paper. First, an analysis of the zero-voltage-switching (ZVS) constraints for the DAB converter has been carried out and a reasonable dead-band setting method has been proposed. Secondly, the basic operating characteristics of the converter are analyzed. Third, under the condition of satisfying the ZVS constraints, both the reactive power and the root mean square (RMS) value of the current are simultaneously minimized and a particle swarm optimization (PSO) algorithm is employed to analyze and solve this optimization problem. Lastly, both simulations and experiments are carried out to verify the effectiveness of the proposed method. The experimental results show that the converter can effectively achieve ZVS and improved efficiency.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.75-80
• /
• 2009

The objective of this research was to select the native shade tolerance plant which grows well from landscape objective of the urban. Seven species native ground cover plants were evaluated on the growth and chloropyll under 0, 40, 60, 90% shading treatments. Hosta longipes was showed the quite good growth from 60% level of natural light. The plant growth of Liriope platyphylla was good within $144.2{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ intensity which is 90% shade level of natural light. But, Dryiopteris crassirhizoma was judged with shade tolerance plant which grow quite well from shading condition level of 60% degree. Carex siderosticea was showed the highest plant length and plant width in 40% shading of natural light more than at conditon too much shading. Hosta longipes, Liriope platyphylla, Dryiopteris crassirhizoma, and Carex siderosticea were as shade tolerance plant with increases chlorophyll content well to overcome a light restrictive condition and is adapted to seem with the result.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.73-77
• /
• 2003

The backlight unit(BLU) is used as a light source of TFT liquid-crystalline-display (TFT-LCD) module. In this backlight unit, one of important components is the light guide, which is usually made of transparent polymers. Currently the screen-printing method is mainly used for the light guide as a manufacturing process. However, it has limitation to the flexibility of three-dimensional optical design. In the present paper a new alternative manufacturing method for the light guide with low-cost is proposed. This manufacturing method is named as direct surface forming (DSF), which is very similar to the well-known hot embossing except for partial contact between mold and substrate. The results of this new manufacturing method are presented in terms of processing condition, dimensional accuracy, productivity, etc.

• Korea-Australia Rheology Journal
• /
• v.15 no.4
• /
• pp.167-171
• /
• 2003

The backlight unit (BLU) is used as a light source of TFT liquid-crystalline-display (TFT-LCD) module. In this backlight unit, one of important components is the light guide, which is usually made of transparent polymers. Currently, the screen-printing method is mainly used for the light guide as a manufacturing process. However, it has limitation to the flexibility of three-dimensional optical design. In the present paper a new alternative manufacturing method for the light guide with low-cost is proposed. This manufacturing method is named as direct surface forming (DSF), which is very similar to the well-known hot embossing except for partial contact between mold and substrate. The results of this new manufacturing method are presented in terms of processing condition, dimensional accuracy, productivity, etc.