• 산업융합연구
• /
• 제1권2호
• /
• pp.17-31
• /
• 2003

Many risk factors with the onset of Low Back Pain(LBP) have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. Injuries due to lifting took account for 34.0%(227,291) out of the total overexertion in MMH(668,084). The weight, vertical location, twist angle, lifting frequency, and lifting posture were reviewed in this study. Technical information for using the revised lifting equation to evaluate a variety of two - handled manual material handling tasks was suggested. To measure worker's fatigue in lifting task, Lifting Index Simulator(LIS) was create under the revised NIOSH(National Institute for Occupational Safety and Health) lifting equation. For the implementation of the LIS, data was collected in A company manufactures various paints in Si-Wha industrial complex, Kyunggi-Do. The results of the Lifting Index(LI) were analyzed by MANOVA to find the relation with lifting variables collected. It was found that horizontal distance, vertical distance, travelling distance and frequency were significant at the 0.01 level and weight was significant at the 0.05 level. The purpose of this paper is to reduce the chronical low back pain for the manual material handlers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.160-161
• /
• 2016

In tall building construction, lift car for worker lifting is a critical factor for construction productivity. To reduce worker lifting time, existing researches have been conducted on lift car planning. While, research on lift car operation is insufficient. For the efficient reduction of worker lifting time, lift car operation control is needed with lift car planning. Therefore, this research suggests operation control model of lift car to reduce worker lifting time. According to the result of a model test, the operation control model contributes to reasonable reduction of worker lifting time.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.101-105
• /
• 2016

Prandtl's Lifting-line theory is the classical theory of calculating aerodynamic properties. Though it is classical method, it predicts the aerodynamic properties well. By lifting-line theory, high aspect ratio is critical factor to decrease induced drag. And 'elliptic-similar' wing also makes the minimum induced drag. But due to the problem of manufacturing, tapered wing is preferred and have been utilized. In this Paper, by using Edison CFD, verifying the classical lifting-line theory. To consider induced drag only, using Euler equation as governing equation instead of full Navier-Stokes equation. Refer to the theory, optimum taper ratio which makes the minimum induced drag is 0.3. Utilizing the CFD results, plotting oswald factor over various taper ratio and investigating whether the consequences are valid or not. As a result, solving Euler equation by EDISON CFD cannot guarantee the theoretical values because it is hard to set the proper grid to solve. Results are divided into two cases. One is the values are decreased gradually and another seems to following tendency, but values are all negative number.

• Safety and Health at Work
• /
• 제3권1호
• /
• pp.52-57
• /
• 2012

Objectives: Lifting heavy weights involves the Valsalva manoeuvre, which leads to intraocular pressure spikes. We used data from a case-control study to further investigate the hypothesis that occupational lifting is a risk factor for retinal detachment. Methods: The study population included 48 cases (patients operated for retinal detachment) and 84 controls (outpatients attending an eye clinic). The odds ratios (OR) of idiopathic retinal detachment were estimated with a logistic regression model (adjusted for age, sex and body mass index). Three indexes were used to examine exposure to lifting; 1) maximum load lifted, 2) average weekly lifting, 3) lifelong cumulative lifting. Results: For all indexes, the most exposed subjects showed an increased risk of retinal detachment compared with the unexposed (index 1: OR 3.57, 95% confidence interval [CI] 1.21-10.48; index 2: OR 3.24, 95% CI 1.32-7.97; index 3: OR 2.23, 95% CI 1.27-8.74) and dose-response relationships were apparent. Conclusion: These results reinforce the hypothesis that heavy occupational lifting may be a relevant risk factor for retinal detachment.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.85-99
• /
• 1998

본 논문은 케이슨의 인양작업중 Fitting Anchor의 취성파괴로 인한 들고리의 붕괴원인을 조사하기 위한 실험적 연구이다. 또한, 본 연구에서는 응력해석을 통하여 들고리의 붕괴메카니즘을 분석하고 이를 실제 붕괴과정과 비교한다. 본 연구에서는 파괴된 강재에 대한 파면해석 뿐만아니라 화학성분시험, 인장시험 및 샤르피 V-노치 충격시험을 실시한다. 그리고 이의 시험 결과를 정상적인 강재에 대한 시험결과와 비교한다. 본 연구의 거시적, 미시적인 방법으로 결함을 관찰한 결과, Fitting Anchor 내부에 원주방향으로 나타난 표면결함은 케이슨의 진수시 발생하는 들고리의 인장응력이 작용하기 전에 발생한 것임을 확인할 수 있었다. 이는 균열선단의 응력집중이 발생하여 작용응력보다 큰 응력이 결함에 발생한 것임을 알 수 있다. 또한, 잠재한 결함의 크기가 임계값 이상으로 증가하여 본 연구대상 강재의 응력확대계수가 증가하였을 것으로 판단된다. 그래서 균열선단의 응력확대계수가 본 강재의 파괴인성보다 크게 되어 케이슨의 인양작업중에 취성파괴를 일으킨 것으로 사료된다. 본 연구결과에 따르면 케이슨 들고리의 붕괴는 Fitting Anchor의 취성파괴로 발생한 것으로 사료된다.

• Kyungpook Mathematical Journal
• /
• 제48권1호
• /
• pp.143-154
• /
• 2008

Lomp [9] has studied finitely generated projective modules over semilocal rings. He obtained the following: finitely generated projective modules over semilocal rings are semilocal. We shall give necessary and sufficient conditions for finitely generated modules to be semilocal modules. By using a lifting property, we also give characterizations of right perfect (semiperfect) rings. Our main results can be summarized as follows: (1) Let M be a finitely generated module. Then M has finite hollow dimension if and only if M is weakly supplemented if and only if M is semilocal. (2) A ring R is right perfect if and only if every flat right R-module is lifting and every right R-module has a flat cover if and only if every quasi-projective right R-module is lifting. (3) A ring R is semiperfect if and only if every finitely generated flat right R-module is lifting if and only if RR satisfies the lifting property for simple factor modules.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.97-106
• /
• 2009

Many production methods are tried to enhance the productivity efficiency. Parallel connected floating cranes are one of the examples to lift mega-blocks quickly and efficiently. However, a general operation manual to operate parallel connected floating cranes and a method to consider risks during lifting operation are not confirmed. And if each floating crane is operated by itself, it is very hard to cooperate. Therefore, Synchronized operation system is installed to control parallel connected floating cranes simultaneously and to be informed of each floating cranes data. And weighting factor is calculated by considering all hazards during the operation and the general operation manual is confirmed based on the factor. This paper introduces the procedure for lifting operations by parallel Connected Floating Cranes using synchronized operation system, and its applications to lifting operation of a heavy cargo such as barge lifting test, floating dock installation and 900 ton goliath crane replacement operation, etc.

• 한국건설관리학회논문집
• /
• 제14권4호
• /
• pp.73-83
• /
• 2013

최근 국내 외 대도시를 중심으로, 글로벌 경제 위기와 부동산 경기 침체로 중단되거나 연기되었던 초고층 프로젝트들이 재개되고 있으며, 이를 수주하기 위한 건설사들의 경쟁은 전보다 더욱 치열해지고 있다. 국내 건설사들이 초고층 건축 분야에서 경쟁력을 높이기 위해서는, 전체 프로젝트의 근간이 되는 중요한 요소인 양중계획의 체계적인 리스크 관리가 반드시 수반되어야 하지만, 여전히 개인적 경험에 의존하여 작성 된, 양중계획의 오류로 인한, 현장 전체의 공기 지연 및 원가 관리 실패의 문제가 빈번하게 발생하고 있다. 따라서 본 연구에서는, 양중계획의 정확성을 높이기 위한 방안으로, 현행 양중계획 체계의 문제점을 분석하고, 계획 요소에 따라 실패 유형을 도출하였으며, 각 실패 유형이 전체 프로젝트의 공정, 원가, 안전관리에 미치는 영향도를 분석하였다. 또한 양중 장비별 세부 리스크 요인을 분석하고, 이를 바탕으로 FMEA 기법을 적용하여 초고층 프로젝트 양중계획의 핵심 리스크 요인을 도출하였다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 춘계학술대회논문집
• /
• pp.106-110
• /
• 1995

A local manufacturing companyin which low back pain(LBP) complaints were frequently reported was selected, and regularly perfomed lifting tasks were investigated using questionnaires and the 1991 NIOSH lifting guide. Among several processes of manufacture in the company, three processes-forming, heating and packing-were studied, where most of tasks were perfomed through manual materials handling (MMH). Questionnaire surveys showed that anthropometric data such as stature, weight and someatotype did not affect and weight of load influenced significantly the incidence of LBP, and workers who expwrienced LBP was older than the inexperienced. In addition, safety education conducted at the company was found to be ineffective in preventing LBP injuries. Lifting indexes(LI) was ranged from 0.86 to 17.0 with an average of 4.49, which revealed that tasks performing in the selected factory were in danger of LBP, and should be ertonomically redesigned. The critical factor reducing LI was found to be the horizontal component in all three processes, and most of weight of load was heavier than load constant(23kg) of the 1991 NIOSH lifting equation in heating process and packing.

• 대한조선학회지
• /
• 제17권3호
• /
• pp.5-17
• /
• 1980

A basic procedure to design marine propellers by a curved lifting line theory was shown. By adapting discrete singularity method, it became possible to take into account of skew, rake and the contraction of slip stream in the early stage of preliminary design procedure. It is also shown that lifting line theory based on the discrete singularity method converges to a common solution obtained by induction factor method with a relatively small number of discrete elements. Lifting the blade geometry more accurately on the basis of hydrodynamic principles. A number of numerical results from lifting line calculation are presented for the purpose of comparison with the previous method, and with these results two sample designs are carried out, which are wake-adapted optimum and wake-adapted non-optimum propellers.