• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.5-11
• /
• 2011

In this paper, the dynamic response analysis of a floating crane with elastic booms and a cargo is performed. The objective is to consider the effects of the elastic boom in the lifting design stage. Governing equations of the motion for the system which consists of interconnected rigid and flexible bodies are derived based on the formulation of flexible multibody system dynamics. To model the boom as a flexible body, floating reference frame and nodal coordinates are used. Coupled surge, pitch, and heave motion of the floating crane with the cargo which has 3 degree of freedom is simulated by solving the equation numerically. Finally, the effects of the elastic boom for the lifting design that the floating crane is required to lift a heavy cargo are discussed by comparing the simulation result between with the elastic boom and with the rigid one.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.197-204
• /
• 2006

The purpose of this study was to investigate the relationship between the cumulative fatigue of trunk muscles and the period of recovery time during repetitive lifting and lowering task with two different frequencies(4 times/min and 6 times/ min). Eight healthy males with no prior history of LBD(low back disorders) volunteered for this study. Subjects had 2, 3, 4, and 5 minutes recovery time respectively while they were preforming the lifting and lowering task at 15% level of MVC. EMG signals from six trunk muscles were collected and the fatigue level was analyzed quantitatively. In results, the fatigue levels of LES(left elector spinae), RLD(right lattissimus dorsi), LLD(left lattissimus dorsi), RRA(right rectus abdominis) and LRA(left rectus abdominis) were recovered when 3 minutes recovery time was given at 4 times/min frequency. However, the fatgue level of RES(right elector spinae) was recovered when 4 minutes recovery was given. On the other hand, when 6 times/min frequency was used, the RLD, LLD, RRA and LRA were recovered at 5 minutes of recovery time. But for RES and LES, it took longer than 5 minutes to be recovered. This results can be applied to design the adequate length of recovery time to control the cumulative fatigue of trunk muscles in industry with repetitive lifting and lowering task.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.531-538
• /
• 2004

This study examined the muscle fatigue of the erector spinae according to box size during lifting activity. Ten healthy adult man participated in the experiment for lifting the boxes 10 times with 0.2 lift/s frequency. Bilateral surface EMG (Electomyogtamphy) recordings were made regarding M. (Muscle) Longissimus, M. Iliocostal and M, Multifidus activity throughout lifting working. The median frequency in back muscle fatigue was investigated using power spectral analysis of surface EMG. When the box larger than shoulder width was lifted, the muscle fatigue of M, Multifidus was shown larger than one of the other muscles. Accordingly, the result far M. Multifidus can be applied in optimizing design parameter of box. Also, the standard of box width for box makers have to be below about 420 mm, being average shoulder width of adult male.

• PNF and Movement
• /
• 제10권4호
• /
• pp.25-31
• /
• 2012

Purpose : The purpose of present study was to investigate the effects of proprioceptive neuromuscular facilitation (PNF) lifting on contralateral leg muscle activities in a seated position. Methods : Twenty healthy subjects were recruited for this study. Lifting was performed from each of the three position. An surface electromyogram (EMG) was used to record the EMG activities from vastus medialis (VM), biceps femoris (BF), tibialis anterior (TA), and gastrocnemius medialis (GM) in contralateral leg muscle. The data were analyzed using a repeated measures of one-way analysis of variance (ANOVA) with post-hoc Bonferroni's correction to determine the statistical significance. Results : The results of this study were summarized as follows: In comparison to the start position, percentage maximal voluntary isometric contraction (%MVIC) values of the VM, TA and GM demonstrated a significantly higher activities in the end position(p<.05). Conclusion : The result shows that contralateral leg muscles activities significantly more increase in the end position when PNF lifting was applied. Therefore, this study will be used to prove effect of indirect approach for the stability and strengthening in patients with leg impairments.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.291-292
• /
• 2021

In modular construction, it is insufficient for safety management of workers, and workers are still exposed to the risk of accidents due to work at high places for lifting and assembly work in modular construction sites. Therefore, it is necessary when preventive safety management through risk management of workers on modular construction sites. This study is a basic study for the risk assessment(checklist) of modular construction, and the purpose of this study is to analyze the risk factors of the module lifting work at the modular construction site. It is intended to identify the hazard risk factors and improvement measures of the existing lifting operation, by analyzing the case of the risk assessment of the existing RC method, and to identify the risk factors for each work process when lifting the module. In the future, the results of this study are expected to be utilized in the development of checklists for risk assessment as safety management plan for modular construction sites.

• 한국건설관리학회논문집
• /
• 제18권2호
• /
• pp.58-70
• /
• 2017

초고층 건축공사에서 리프트카를 이용한 자재 양중 관리는 핵심적인 관리분야 중 하나이다. 기존 연구들은 양중계획의 기본 단위인 양중 사이클타임이나 리프트카의 운행효율은 기존 사례를 참고하여 적용하거나 관리목표로 설정하고 개략적으로 산정하는 한계가 있었다. 따라서 본 연구에서는 양중 사이클타임을 단축하고 가동율을 향상시키기 위하여 자재 양중작업 프로세스를 최적화하는 방법론 제안을 목표로 하였다. CYCLONE 모델을 변형하여 작업시간과 작업위치를 반영할 수 있도록 개선하고, 세부 작업을 조정하여 프로세스를 최적화 하는 방법론을 제안하였다. 이 방법론에 따라 양중작업 프로세스를 개선하고 민감도 분석과 현장 적용성 평가를 실시하였으며 초고층 현장에 적용하였다. 기존 작업 프로세스와 개선된 작업 프로세스를 양중 높이별로 시뮬레이션하고 이를 현장 적용 결과 데이터와 비교하여 양중작업 시간 단축과 가동율 향상 정도를 비교 분석하여 최적화 방법론의 효용성을 검증하였다.

• 국제물리치료학회지
• /
• 제3권1호
• /
• pp.391-396
• /
• 2012

The purpose of this study is to identify which width of the base of support(BOS) is safer and more effective in lifting by comparing muscle activations and body sways when lifting objects under the width variation of the BOS. A total of fifteen healthy adults participated in this study. For the width variation of the BOS, the participants changed the width between their feet into three different types(10cm, 32cm, 45cm) and lifted a 10kg four times in each type after going up on a force plate. In order to measure body sways according to the width variation of the BOS, a motion analysis system was used. In addition, in order to measure the muscle activations of lower extremities, including the erector spinae, gluteus maximus, rectus femoris, and tibialis anterior, an electromyogram(EMG) analysis was employed. In addition, the Borg's scale was drawn by quantifying the subjective discomfort levels felt from each width of the BOS. In conclusion, no statistically significant differences according to the width variation of the BOS were observed(p=.295, .308)(p>.05). However, a statistically significant difference was exhibited between the Borg's scale, which indicates the discomfort levels from lifting performances, and the width variation of the BOS (p=$.000^*$).

• 한국건설안전학회 논문집
• /
• 제2권2호
• /
• pp.63-69
• /
• 2019

현재 빌딩 건설 프로젝트의 규모가 점점 더 커지고 있다. 이에 따라 다른 양중 장비보다 생산성이 높은 타워크레인 사용이 지속적인 증가하고 있는 추세이다. 그러나 무거운 물건을 운반하는 장비는 임대료가 비싸고 비효율적으로 운영되고 있으며 양중 작업의 생산성 및 효율성이 저하된다는 문제가 있는 것으로 분석되었다. 따라서 본 연구에서는 우선 현장에서 비효율적으로 운영되는 타워크레인을 조사한 후 타워크레인 작업에 영향을 미치는 항목들에 대한 점검 목록을 작성했다. 그 후 현장 방문을 통해 타워 크레인 점검표를 종합적인 데이터 가치로 도출했다.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.130-142
• /
• 2017

Background: Osteoarthritis of the knee is considered to be related to knee straining activities at work. The objective of this review is to assess the exposure dose-response relation between kneeling or squatting, lifting, and climbing stairs at work, and knee osteoarthritis. Methods: We included cohort and case-control studies. For each study that reported enough data, we calculated the odds ratio (OR) per 5,000 hours of cumulative kneeling and per 100,000 kg of cumulative lifting. We pooled these incremental ORs in a random effects meta-analysis. Results: We included 15 studies (2 cohort and 13 case-control studies) of which nine assessed risks in more than two exposure categories. We considered all but one study at high risk of bias. The incremental OR per 5,000 hours of kneeling was 1.26 (95% confidence interval 1.17-1.35, 5 studies, moderate quality evidence) for a log-linear exposure dose-response model. For lifting, there was no exposure dose-response per 100,000 kg of lifetime lifting (OR 1.00, 95% confidence interval 1.00-1.01). For climbing, an exposure dose-response could not be calculated. Conclusion: There is moderate quality evidence that longer cumulative exposure to kneeling or squatting at work leads to a higher risk of osteoarthritis of the knee. For other exposure, there was no exposure dose-response or there were insufficient data to establish this. More reliable exposure measurements would increase the quality of the evidence.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.84-89
• /
• 2021

Recently, shipyards are making many efforts to reduce the number of the mounted blocks by increasing the block size. This is to improve productivity and reduce related costs by minimizing block movement and shortening the building period. However, as the blocks become larger, the weight increases considerably. If the target block has a damage due to an unexpected accident during block lifting, it may seriously cause a problem of the reusability of the block. In this study, a large-sized block of the offshore structure weighing 480 tons was lifting with a total of seven sling belts, and one sling belt was broken while it was moving, resulting in a situation in which a part of the edge of the block collided with the ground. The aim of this paper is to verify the structural integrity of the block that directly collides with the ground in the form of free fall due to the sling breakage. Considering that the hook loads acting on several sling belts holding the block are redistributed when a sling belt is broken, the hook loads were recalculated at the angle just before the sling breakage. These loads were used to check the safety of the sling belts. In addition, FE analysis was performed by calculating the amount of impact from the free fall condition, obtaining the impact area by using Hertz's contact theory, and then applying the impact load to the area.