• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.713-728
• /
• 2021

This paper proposes an augmented reality technique to generate acrobatic scenes from hitting motion videos. After a user shoots a motion that mimics hitting an object with hands or feet, their pose is analyzed using motion tracking with deep learning to track hand or foot movement while hitting the object. Hitting position and time are then extracted to generate the object's moving trajectory using physics optimization and synchronized with the video. The proposed method can create videos for hitting objects with feet, e.g. soccer ball lifting; fists, e.g. tap ball, etc. and is suitable for augmented reality applications to include virtual objects.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.77-78
• /
• 2023

As large logistics buildings have high floor heights and long spans, these buildings are designed as PC structures, and large cranes are used to lift PC members. PC erection planning can generally cause errors depending on the field engineer's experience. To solve this problem, a basic analysis method is needed to establish a systematic PC member erection plan. Crane work can be minimized if the trajectory is easily and quickly calculated according to the location of the crane and applied to the site. Therefore, the objective of this study is a basic study of crane trajectory distance calculation for sustainable PC members erection of large logistic building. In this study, a crawler crane commonly used for lifting PC members is limited. The trajectory distance for the PC erection plan was automatically calculated using the algorithm.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.5
• /
• pp.453-463
• /
• 2017

Due to the increase in the size of buildings and scale, the importance of construction engineering that reflects the constructability from the design stage of the project is increasing. Especially, engineering efforts related to facilities, equipment and construction methods for temporary work at the design stage can significantly contribute to improvement of constructability and project performance. The purpose of this study is to derive construction engineering tasks on temporary work at the design phase of the high-rise building projects. 27 preliminary tasks were firstly investigated through literature review and experts' group interview, and the necessity and importance analysis of each tasks were then performed based on questionnaire survey. Most of the tasks related to plans on structural framework and lifting equipment were analyzed as relatively more important ones. Lastly, 21 engineering tasks, which are classified into 5 factors, were proposed through factor analysis. The factors were determined as 1) structural framework, measurement and circulation, 2) lifting equipment and pumping, 3) space zoning, 4) water supply, 5) temporary facility, electric power supply and lighting. The results of this study can be used as basic data for establishing efficient work process of construction engineering on temporary work at the design phase.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• Korean Journal of Human Ecology
• /
• v.16 no.4
• /
• pp.825-835
• /
• 2007

The purpose of this research is to examine the relationship between body satisfaction and appearance enhancement behavior of college students. A questionnaire survey was conducted on 234 college students in Cheong-ju area, Korea. Frequency, descriptive analysis, $x^2$ and t-tests were used for data analysis. Male students were generally satisfied with their height but not with their weight, while female students were not satisfied with their height and weight. There were significant gender differences in satisfaction with their skin color: male students were mostly satisfied with their skin color other than female students. The body satisfaction degree of college students depended on gender: the male students showed more satisfaction with their physical condition than the female students. Of the college student's improving-appearance behaviors such as face-lifting by plastic surgery, make-up by cosmetics and skin care, their preferable choice depended on their gender. When purchasing clothes, they considered if the clothes could cover their defects of their body line and improve their physical appearance. The levels of body satisfaction were significantly different according to their appearance enhancement behaviors.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.57-69
• /
• 2000

A higher order panel method based on representation for both the geometry and the velocity potential is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then the singular part is integrated analytically whereas the non-singular part is integrated using Gaussian quadrature. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution around lifting bodies with much fewer panels than existing low order panel methods.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.385-397
• /
• 2006

A high prevalence of farmer's work-related musculoskeletal disorders(MSDs) have been reported in precedent studies. To offer the basic data for reducing the melon farmer's MSDs, a questionnaire survey about MSDs symptoms and work loaded body part and video analysis by 3 checklist(REBA, RULA, OWAS) for musculoskeletal risk assessment were carried. 94 melon farmers for this questionnaire and 1 typical farm for risk assessment were participated. A total of 80.9% of the farmers reported musculoskeletal symptoms and 60.6% reported musculoskeletal symptoms over NIOSH standard. The mainly symptom body part is low back, knee and shoulders. Main risk factors in melon farm are awkward postures, heavey/frequent lifting and repetitive hand/arm motions. The high risk tasks induced by video analysis were harvesting, removing the sprouts and covering with rags. These result can be used practically for planning intervention strategy and programs to prevent farmer's MSDs.

• Journal of Power System Engineering
• /
• v.19 no.5
• /
• pp.17-24
• /
• 2015

In this paper, the development of an air cushion transporter has been studied. To do this, theoretical analysis is introduced to design the equipment and computational fluid dynamics is also conducted. Design of an air cushion transporter for heavy load carriage is completed and a prototype is manufactured. Through the analysis and experiment of the developed the prototype, it can be known that the developed transporter can levitate the load of about 1 ton at the applied pressure of 0.2 MPa and the maximum lifting height at this condition is 17mm.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.78-83
• /
• 2008

In recent years, small boats used for marine leisure have been steadily increasing because of the increase in national income and the desire for marine leisure. But the repair of such small boats in dry dock has pointed out many faults in small FRP-shipbuilding in terms if workspace and manpower. Lifting a boat from the water to land is done with a crane or by hand using a sling around the bottom of the boat. But dry dock work is limited by the scale of the boat, which corresponds to the crane capacity, with carelessness making it possible to capsize a boat and endanger life. The purpose of this study was the development of a marine docking system that would improve economical efficiency and safety, for which we carried out concept design, model tests, structural analysis, etc.