• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.739-741
• /
• 1999

This paper describes the fault monitoring system for lift type tower parking facilities. This system consists of tower parking facility control panel and monitoring computer, and offers real-time monitoring of parking status and fault detection, and status data acquisition of tower parking system using graphic user interface.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.364-366
• /
• 2017

해양플랜트는 일반 선박과는 달리 작업이 진행되면 고정된 위치에서 장시간 운용되는 특성으로 인하여 높은 신뢰성을 요구하고 있으며 안전 확보를 위하여 사용자 및 유지보수 작업자에게 센서 기반 상태 정보가 필요하다. 본 논문에서는 해양플랜트용 Cargo Lift에 대한 안전진단 및 점검을 위한 모니터링 시스템을 제안한다. 해양플랜트 Cargo Lift에 탑재된 센서부와 임베디드 시스템 계측부, 실시간 데이터 확인을 위한 모니터링부로 구성되며 조선해양 분야에서 장비들의 고도화 및 통합화에 따라 승강기에 대한 운행정보 및 센서 계측 정보의 교환을 위해 선박 표준 네트워크 IEC 61162-450을 기반으로 한다.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.125-135
• /
• 2022

While buildings in recent days become taller and larger, many problems occur during the management of construction. Particularly, as the vertical movement of manpower and materials during construction has become longer while the lifting frequency and load increase, the need for a good lifting management practice is also increasing. Therefore, this study presents a real-time lifting performance monitoring system that can store and manage lifting records for construction management. Through review of literature and preceding studies related to construction lift, the concept of lift planning and operation management was understood, leading to the development of a system to monitor lifting operation and performance information. This system enabled quick measurement of the lifting performance during construction phase while responding to changes in the project schedule. To verify this system, a case study was conducted in which the current status and characteristics of the sensing-based lifting performance were derived.

• 한국건설관리학회논문집
• /
• 제13권2호
• /
• pp.110-119
• /
• 2012

초고층 건축물의 수요가 늘어나면서 수직 양중 계획과 장비에 대한 중요성이 증대되고 있으며, 경제적이고 효율적인 리프트 사용을 위하여 무인 리프트의 사용 비중이 늘어나고 있다. 하지만 리프트의 정지위치 에러가 발생하거나 누적되는 경우 작업 효율성이 떨어지고, 문제 해결을 위해 리프트 업체가 리프트를 재 세팅 하는 동안 리프트 사용이 불가하게 되어 공사 진행에 장애가 된다. 본 연구에서는 리프트 정지위치 에러에 의한 시간 및 비용 손실을 방지하기 위해 리프트 정지위치 감지장치를 개발하였다. 실험을 통해, 정지위치 에러 발생 시 이를 보정하는 기능을 검증하였고, 정확도도 약 9.75mm 증가하는 것을 확인하였다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.242-249
• /
• 2009

High-rise construction sites, especially those situated in spatially constrained urban areas, have difficulties in timely delivery of materials. Modern techniques such as Just-in-time delivery, and use of information technology such as Project Management Information System (PMIS), are targeted to improve the efficiency of the logistics. Such IT-driven management techniques can be further benefited from state-of-the-art devices such as Radio Frequency Identification (RFID) tags and Ubiquitous Sensor Networks (USN), which has resulted in notable achievements in automated logistics management at the construction sites. Based on those achievements, this research develops USN hardware toolkits for construction lifts, which aims to be automated the vertical material delivery by sensing the material information and routing it automatically to the right place. The gathered information from the sensors can also be used for monitoring the overall status. The developed system will be tested in the actual high-rise construction sites to assess the system's feasibility. The proposed system is being implemented using Zigbee communication modules and RFID sensor networks which will communicate with the intelligent palette system (previously developed by the authors). To support the system, a lift-mountable intelligent toolkit is under development. Its feasibility test will be conducted by applying the implemented system to a test bed and then analyzing efficiency of the system and the toolkit. The collected test data will be provided as a basis of autonomous vertical transport equipment development. From this research, efficient management of the material lift is expected with increased accuracy, as well as better management of overall construction schedule benefited from the system. Further research will be expected to develop a smart construction lift, which will eliminate the need for human supervision, thus enabling a real 'autonomous' operation of the system.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.465-482
• /
• 2013

Recently, a novel stress sensor, which utilizes the elasto-magnetic (EM) effect of ferromagnetic materials, has been developed to measure stress in steel cables and wires. In this study, the effectiveness of this EM based stress sensors for monitoring of the cable tension force of a real scale cable-stayed bridge was investigated. Two EM stress sensors were installed on two selected multi-strand cables in Hwa-Myung Bridge, Busan, South Korea. Conventional lift-off test was conducted to obtain reference cable tension forces of two test cables. The reference forces were used to calibrate and validate cable tension force measurements from the EM sensors. Tension force variations of two test cables during the second tensioning work on Hwa-Myung Bridge were monitored using the EM sensors. Numerical simulations were conducted to compare and verify the monitoring results. Based on the results, the effectiveness of EM sensors for accurate field monitoring of the cable tension force of cable-stayed bridge is discussed.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.1-8
• /
• 2005

The industrial induction motor is widely used in the rotating electrical machine for the transmission of power. It is very reliable equipment, but it could lead to the loss of production and lift when failure occurs. Therefore, the failure data is acquired and analyzed by attaching an exclusive instrument to existing induction motor. However, these instruments could lead to side effects, increasing the production costs, because they are very expensive. The purpose of this study is the development of an induction motor bearing failure diagnosis system constructed using LabVIEW which can be supplied the kernelled function, process monitoring and current signature analysis. In addition, the availability and reasonability of the constructed system was examined for an induction motor with failure defects in outer raceway and ball bearing. From the results, it shows that failure diagnosis system constructed is useful for real-time monitoring with detection of bearing defects over the web.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.423-431
• /
• 2022

The UPS(Uninterruptible Power Supply) system operates in the battery charging mode when the grid is normal, and in the UPS mode, which is the battery discharge mode when a grid error occurs. Since the UPS must supply the same voltage as the grid to the load within 4 [ms] in case of a grid error, the switching time and power recovery time should be short when controlling the output voltage and current of the UPS, and the power failure detection time is also important. The power outage detection algorithm using DFT(Discrete Fourier Transform) proposed in this paper compares the grid voltage waveform with the voltage waveform including the 9th harmonic generated through DFT using Schmitt trigger to detect power outage faster than the existing power outage monitoring algorithm. There are advantages. Therefore, it is possible to supply instant and stable power when switching modes in the UPS system. The multi-power-applied UPS system proposed in this paper uses DFT, which is faster than the conventional blackout monitoring algorithm in detecting power failure, to provide stable power to the load in a shorter time than the existing power outage monitoring algorithm when a system error occurs. The detection method was applied. The changeover time of mode switching was set to less than 4 [ms], which is 1/4 of the system cycle, in accordance with KSC 4310 regulation, which was established by the Industrial Standards Council on the regulation of uninterruptible power supply. A 10 [kW] UPS system in which commercial voltage, vehicle generator, and auxiliary diesel generator can be connected to each of the proposed transfer devices was constructed and the feasibility was verified by conducting an experiment.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.273-274
• /
• 2006

The sea is origin of all lift, and 90% of the all living organisms are in the sea. The biosynthesis is very different. Many organisms are kept on a lower or developed to another evolutionary level than on shore. Our society is increasing demand and need for marine food and this food has to product at onshore or offshore fish farming sites. Ocean fish farms have a special operation properties such as a good quality water, net cage, sheltered locations and feeding system. The farming site is controlled and monitored for fish welfare as ammonia($NH_3$), temperature, the speed of a running fluid. Specially, the fish farm is seriously influenced by ammonia. In this paper, $NH_3$ monitoring system for ocean fish farm is researched for the suitable fish farming sites, and test equipment is designed for achieving practical data. The equipment wit monitoring algorithm is expected to the useful system for ocean fish farm.

• 한국컴퓨터정보학회논문지
• /
• 제28권10호
• /
• pp.155-161
• /
• 2023

본 논문에서는 승강기 비상통화 장치의 활용성과 안정성을 높이기 위해 상시 모니터링 환경의 서비스 체계를 구축하는 WebRTC 기반의 비상 화상통화 시스템 구조를 제시한다. 제시된 시스템은 비상상황 시 승강기 내의 비상 호출 시스템과 유지보수 담당자들 간의 원활한 통화 환경을 제공하고 대상 승강기의 모니터링을 통해 승강기 비상 호출에 대한 신속한 응답 처리를 수행하고 승강기의 물리적 공간에서 발생할 수 있는 화상통화에 필요한 제약환경을 극복하여 음성과 영상의 저지연 실시간 화상통화 서비스를 구현할 수 있는 환경을 구축하고자 한다. 이를 위해 현재 다양한 분야에서 활용되고 그 성능이 검증된 OpenAPI를 기반으로 서비스 환경을 구축하고 실시간 화상통화 및 저지연 통화 품질 제공, 그리고 신속한 메시징 방식의 비상상황 전파 방식을 통해 비상 화상통화 장치의 성능 및 활용성을 높이고자 한다. 제시된 시스템 구조는 승강기 제어반 및 다양한 장치와의 결합을 통해 다양한 기능 확장 및 신뢰성 있는 서비스 환경을 통해 승강기 시스템에 대한 지능적 모델을 구성할 수 있는 기반을 제공할 수 있을 것이다.