• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.19-23
• /
• 2002

This experiment was conducted to micropropagate bulblets via shoot cluster formation and massproduce normal bulblets from the sections of proliferated shoot clusters in Lilium asiatic hybrid 'Hae Hwa'. The induction of shoot clusters from the culture of bulblet sections was more effective than that of bulb scales on MS medium with 1.0 mg/L BA and 0.5 mg/L IAA. Proliferation of shoot clusters from the formed shoot cluster sections was the most favorable on medium containing 5.0 mg/L BA and 0.5 mg/L IAA. The formation and the growth of bulblets from shoot cluster sections were achieved effectively on medium with 60∼90 g/L sucrose. The leaves derived from shoot clusters grew vigorously but the bulblets from shoot clusters grew very poor in 5L air-lift bioreactor culture. By the addition of 30 mL fresh liquid medium containing doulble strength MS salts, 250 g/L sucrose and 5 g/L activated charcoal after 8 weeks in the shoot cluster culture on MS medium with 5.0 mg/L BA and 0.5 mg/L IAA, the number of bulblets was increased in light condition, but the growth of bulblets was not affected by light. Bulblet production was possible with the bulblet product at 53 to 68 mg in fresh weight by liquid medium addition after the proliferation of shoot cluster.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.6
• /
• pp.455-463
• /
• 1998

RCCA(rod cluster control assembly) End-Tip suffers from neutron irradiation and constant vibration due to high-speed internal flow of primary coolant during plant operation. Such operating conditions cause the RCCA end-tip crackings around tile circumferential weldment of the end-tip, and in some cases, the defective end-tips were completly broken loose. However, no reliable inspection techniques for end-tip crackings were developed in the past, although some techniques exist for inspecting RCCA control rod wears. Therefore, NDE group at KEPRI has developed an ECT technique for the detection and the sizing of the end-tip crackings. The technique uses a specially designed surface-riding probe that can detect size of circumferential crackings with an accuracy of ${\pm}5.31%$ RMS error. This paper describes the ECT instrumentation including the ECT probes, calibration bars, as well as technical approaches.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.2
• /
• pp.23-29
• /
• 2020

Korea's elevator industry is one of the world's eighth-largest industrial sectors and the third largest in the world by new installations. This year, the number of elevators has exceeded 700,000, and the number of new installations is 30,000-40,000 every year. However, the news of elevator-related accidents is reported continuously through the media and the accident rate is not decreasing. In particular, among the recent accidents related to elevators, accidents related to elevator workers are increasing, causing social problems. This year, the National Assembly's Environmental Labor Relations Commission's National Auditors lost five lives a year and 12 elevator workers were killed in fall and stenosis accidents during the installation, maintenance and replacement of the elevators for about two years since 2018. It took place to adopt the representatives of four domestic elevator companies as witnesses. An elevator worker is a collective term for workers involved in the design, manufacturing, installation, replacement, maintenance, inspection, management, and supervision related to the elevator industry, and the related accidents are called elevator worker accidents. Analysis of elevator-related accidents in the past has shown that the fault of the user accounted for 70% of the total, and the fault of the worker accounted for about 2.5%, and the accident occurred to the user or the user due to carelessness of the worker during the lift-related work. Currently, elevator-related accidents are reported by the Korea Elevator Safety Agency under Article 48 of the Elevator Safety Management Act under the Ministry of Interior and Safety. If deemed necessary for the prevention and prevention of recurrence of an elevator accident, the cause and condition of the elevator accident may be investigated. However, the current draft law is limited only to elevators after installation inspection, and is separated from the Ministry of Employment and Labor's data on accidents occurring in the manufacturing and installation stages related to the elevator industry. This study analyzes the recent safety accidents of elevator workers and prepares safety measures to prevent them through the risk analysis, and also draws out the problems and improvements of the current elevator worker accident investigation to find the elevator worker accident rate that is on the increase trend.

• Journal of Sasang Constitutional Medicine
• /
• v.14 no.2
• /
• pp.25-34
• /
• 2002

To understand characteristic of preservation of health in Sasang constitutional medicine, 1 first study preservation of health In ${\ulcorner}$Dongyi Bogam${\lrcorner}$, and then study preservation of health in the ${\ulcorner}$Dongyi Soose Bowon Sasang Chobongyun${\lrcorner}$ particularly Inherent vitality(命脈實數) and Regimen in ordinary life(生息充補之道) which shows early thought of Lee Je-ma. I acquire relation and difference between ${\ulcorner}$Dongyi Bogam${\lrcorner}$ and Dongyi Soose Bowon Sasang Chobongyun${\lrcorner}$, and conclude as follows. 1. In preservation of health ${\ulcorner}$Dongyi Bogam${\lrcorner}$ says Ups and downs of Qi according to degree, tells congenital health and acquired care of health, grades Jin-In, Ji-In, Seong-In, Hyeon-In according to degree of moral culture, and especially emphasizes managing mind which is based on Taoism. 2. In ${\ulcorner}$Dongyi Soose Bowon Sasang Chobongyun${\lrcorner}$ Dongmu divides human being to Sasangin(Taeyangin, Taeumin, Soyangin, Soeumin) according to Large & small of viscera, and regards as determine lift span and rendition of disease & health according to Inherent vitality which is degree of Small viscera. 3. Inherent vitality of Sasangin is supplemented by Regimen in ordinary life. Because Regimen in ordinary life decreases according to age, Dongmu emphasizes managing mind through an autonomic Knowledge Deed to maintain Regimen in ordinary life. 4. In the way of managing mind ${\ulcorner}$Dongyi Bogam${\lrcorner}$ says Taoist moral culture, but Dongmu emphasized control of knowledge and Deed by Confucian moral culture and the mind of control others through confucian self-control.

• The Korean Society of Law and Medicine
• /
• v.21 no.2
• /
• pp.3-33
• /
• 2020

Until recently the German and the South Korean medical associations reacted cautiously to the introduction of telemedicine between doctor and patient which is exclusively on the platform conducted. But the General Assembly of German Physicians voted to lift the ban on remote treatment with the amendment to Section 7 (4) MBO-Ä(Medical Association's Professional Code of Conduct) in 2018 and the situation has been fundamentally changed in Germany. From then until now 16 of 17 rural medical associations have changed their professional code to allow telemedicine. In addition the legislature started to prepare the basis for the introduction of the electronic health card (eGK) and the telematics infrastructure. So far, various laws such as Medicinal Products Act, Drug Advertisement Act and Social Code have been changed to support legalization of telemedicine and digitalization of health care. Unlike in Germany, the social circumstances such as excessive centralization of the big hospitals in Seoul and the resulting concern of small medical practices for profitability are the main obstacles to the introduction of telemedicine. However the German approach how to legalise the telemedicine and to prepare for legal and technical infrastructure is also interesting in South Korea. The discussions for and against the changes in the law and the telematics infrastructure attempted by the German government for several years indicate that not only lifting the ban on remote treatment, but also harmonization of all the related legal system could guarantee successful implementation of telemedicine.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.299-305
• /
• 2019

This study was initiated to solve the difficulties of aged and female workers in agriculture society due to aging and demise of young people. In the case of the conventional elevated lift, the risk of exposure to uneven road or work environment, not the difficulty of professional qualification and operation, and the risk of exposure to the uneven road or working environment, were also studied based on previous researches so that women could easily and efficiently perform productive agriculture. First, the simulation was carried out through the prediction model of traction performance using the object of agricultural forklift, and the soil of the Kimhae city in Gyeongnam (34.125kPa, internal friction angle 35.294deg, external friction angle 13.620deg, Adhesion force 5.750 kPa, average cone index 0-15 cm cl, 1001.8 kPa). In the case of the forklift for simulation, the driving force and the kinetic resistance prediction modeling of the agricultural electric forklift are modeled. Based on this model, the motor control drive adopts the 1232E model, which is a drive dedicated to AC motor, and divides the two drivers into master and slave And the model for the simulation was designed to control motor drive, hydraulic drive, and various outputs on the main PCB. The simulation model is undergoing continuous simulation, modification and supplementation. Based on this research, we will continue research for development of safer and more efficient agricultural electric forklift.

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.23-31
• /
• 2018

In the present work, the thrust and torque of multicopter propellers in hovering are predicted based on BET method. The geometry information of the propellers is obtained using a three dimensional scanner and the airfoil section is extracted using CATIA. EDISON CFD is adopted to calculate the drag and lift of airfoil at a given geometry and flow conditions and then thrust is calculated with respect to a given RPMs based on BET. Two simulations with laminar and turbulent flows are considered. The predicted value is compared with the performance data from the Product Company and results from JavaProp software, which is used in the design and prediction of propellers. In the case of a 9-inch propeller, the thrust from the product company is corresponding to the results between the laminar and turbulent flow conditions. In the 16-inch case, the predicted thrust at turbulent flow conditions conformed well with reference one. The predicted torque shows a big difference with the reference data.

• Wind and Structures
• /
• v.28 no.2
• /
• pp.71-87
• /
• 2019

The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.114-123
• /
• 2019

Tracking ICT applications on construction business processes is critical to the success of ICT-applied construction projects. Existing IDEF0 is a representative modeling method for visualizing and analyzing business processes. It defines a construction production process into a visual information model, hence, encouraging the project participant to understand the activities, their deliverable, and control flow of the process. However, IDEF0 dose not lend itself to ICT-applied construction processes, because it does not provide a mean to define how, in what order, by which each and every activity that ICT applied implements. This paper presents a new business modeling method that improves the traceability of ICT application (IAMB: ICT Application tracking Model for Business process) for construction management. The IAMB contributes to handle the sophisticated features of construction management processes to which ICT are applied. The method categorizes the process into three types: management, construction, and information exchange. The validity of IAMB was confirmed by analyzing the performance when it is used for tracking each modeling step of lift reservation process which making use of ICT. The test case provides an admissible evidence that the method encourage to define who, what, how, which order, and by which ICT tools the construction process exchanges production information.