• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.149-151
• /
• 2011

Recently, Architectural Design based on Building Information Modeling(BIM) is popular, construction management based on BIM is necessary. such as Quantity take off, scheduling, and Life Cycle Cost Estimating etc. Therefore, in the study, LCC Estimating using BIM Data, which is extracted from architectural designing process is proposed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.149-150
• /
• 2012

According to the increase of demand of the deteriorated building. The interest of the building's maintenance is continually increased, so studies about how to increase building's stability & prolonged life span are increased. This study's purpose is to maintain building's function, so we suggest a protocol type system of UI to estimate reasonable planning of demand of repair & replacement and to distribute budget.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.145-152
• /
• 2000

X-ray diffraction method detects change of crystal lattice distance under material surface using diffraction angle 2$\theta$. This technique can be applied to the behavior on slip band and micro crack due to material degradation. The relation between half-value breadth and number of cycle has three stages which constitute rapid decrease in initial number of cycles, slight decrease in middle number of cycles and rapid decrease in final number of cycles. The ratio of half-value breadth takes a constant value on B/B$_{0}$-N diagram with loading condition except early part of fatigue life. The ratio of half-value breadth B/B$_{0}$ with respect to number of cycle to failure N$_{f}$ has linear behavior on B/B$_{0}$-log N$_{f}$ diagram. Therefore, in this paper the estimation of fatigue life by average gradient method has much less estimated mean error than the estimation of fatigue life by log B/B$_{0}$-log N/N$_{f}$ relation.elation.ation.

• Smart Structures and Systems
• /
• 제13권3호
• /
• pp.407-418
• /
• 2014

The purpose of this paper is to present an Integrated Life Cycle Bridge Information Modeling that can be used throughout different phases of the bridge life cycle including: design, construction, and operation and maintenance phases. Bridge Information Modeling (BrIM) has become an effective tool in bridge engineering and construction. It has been used in obtaining accurate shop drawings, cost estimation, and visualization. In this paper, BrIM is used as an integrated tool for bridges life cycle information modeling. In the design phase, BrIM model can be used in obtaining optimum construction methods and performing structural advanced analysis. During construction phase, the model selects the appropriate locations for mobile cranes, monitors the status of precast components, and controls documents. Whereas, it acts as a tool for bridge management system in operation and maintenance phase. The paper provides a detailed description for each use of BrIM model in design, construction, and operation and maintenance phases of bridges. It is proven that BrIM is an effective tool for bridge management systems throughout their life phases.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.122-129
• /
• 2004

In plastic working, as working becomes speedy, automatic and working condition deteriorates, the increase of forging working has been remarkable. Therefore, we need the estimation of mold lift in detail, in order to counterplan of effective mold life extension. In this study, on the SKH51, mold steel which is forged by cold working and the KCW1, tool steel of low alloy, we estimated mold life on the base of FEM analysis and investigated mold lift by low cycle fatigue test. Also, this paper suggested a new method of estimation of mold lift.

• 시스템엔지니어링워크숍
• /
• 통권1호
• /
• pp.40-53
• /
• 2003

• 산업경영시스템학회지
• /
• 제18권34호
• /
• pp.173-183
• /
• 1995

Life cycle cost has been one of the key criteria in design or purchasing of systems, particularly in the flying weapon system. Unexpected cost increase or system breakdown during the system life can be reduced by controlling maintenance cost A system should be designed for maintainability in early stage of product life cycle. The design should be insensitive to its environmental, organizational, and human factors in the stage of customer's utilization. This paper presents LCC as a controllable variable and also suggests a new control model for LCC analysis. The estimation of maintenance cost based upon maintenance scenario, design of maintainability followed by minimizing maintainability loss function in the beginning stage of design, and increase of useful life of systems are among the factors to control LCC.

• 한국IT서비스학회지
• /
• 제12권3호
• /
• pp.345-377
• /
• 2013

Government agencies have many difficulties for the information system development and operation. One of the difficulties is a budget estimation. Each government agency suggests individually different estimation for the personnel expenses and IT infrastructure adoption costs in the same field of informatization promotions. The other one is the operation costs are increased exponentially in every year[42, 51]. Those difficulties make government agencies can not help adopting SaaS. In fact, most of IT consulting company and government agencies already recognized a variety of SaaS advantages. The most typical SaaS's advantages are cost reduction, Software rapid development and deployment. However, once government agencies decide to adopt SaaS, they can not avoid many problems and difficulties. There is no information in a detailed item in a budget. In those kinds of situation, there is no choice whether government agencies accept SaaS provider's suggesting adoption costs or not. Thus, we provide a sheet of SaaS adoption cost estimation to government agencies. To know the cost factors, this study uses TCO(Total Cost of Ownership)'s criteria. To give a management point, this study uses Gartner's Application development Life Cycle. In this study, the integration check framework which is SaaS adoption cost estimation makes government agencies possible to establish a adequate budget.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• Journal of Information Technology Applications and Management
• /
• 제22권3호
• /
• pp.143-167
• /
• 2015

This paper addresses the issue how the total life cycle cost may be minimized and how the cost should be allocated to the acquirer and developer. This paper differentiates post life cycle change (PLCC) endeavors from PLCC activities, rigorously classifies PLCC endeavors according to the result of PLCC endeavors, and rigorously defines the life cycle cost of a software product. This paper reviews classical definitions of software 'maintenance' types and proposes a new typology of PLCC activities too. The proposed classification schemes are exhaustive and mutually exclusive, and provide a new paradigm to review existing literatures regarding software cost estimation, software 'maintenance,' software evolution, and software architecture from a new perspective. This paper argues that the long-term interest of the acquirer is not protected properly because warranty period is typically too short and because the main concern of warranty service is given to removing the defects detected easily. Based on the observation that defects are caused solely by errors the developer has committed for software while defects are often induced by using for hardware (so, this paper cautiously proposes not to use the term 'maintenance' at all for software), this paper argues that the cost to remove defects should not be borne by the acquirer for software.