• Title/Summary/Keyword: Life curve

Search Result 987, Processing Time 0.03 seconds

Growth curve estimates for wither height, hip height, and body length of Hanwoo steers (Bos taurus coreanae)

  • Park, Hu-Rak;Eum, Seung-Hoon;Roh, Seung-Hee;Sun, Du-Won;Seo, Jakyeom;Cho, Seong-Keun;Lee, Jung-Gyu;Kim, Byeong-Woo
    • Korean Journal of Agricultural Science
    • /
    • v.44 no.3
    • /
    • pp.384-391
    • /
    • 2017
  • Growth curves in Hanwoo steers were estimated by Gompertz, Von Bertalanffy, Logistic, and Brody nonlinear models using growth data collected by the Hanwoo Improvement Center from a total of 6,973 Hanwoo (Bos taurus coreanae) steers 6 to 24 months old that were born between 1996 and 2015. The data included three parameters: A, mature size of body measurement; b, growth ratio; and, k, intrinsic growth rate. Nonlinear regression equations for wither height according to Gompertz, Von Bertalanffy, Logistic, and Brody models were $Y_t=144.7e^{-0.5869e^{-0.00301t}}$, $Y_t=145.3(1-0.1816e^{-0.00284t})^3$, $Y_t=143.1(1+0.7356e^{-0.00352t})^{-1}$, and $Y_t=146.8(1+0.4700e^{-0.00249t})^1$, respectively, while those for hip height were $Y_t=144.5e^{-0.5549e^{-0.00312t}}$, $Y_t=145.0(1-0.1724e^{-0.00295t})^3$, $Y_t=143.1(1+0.6863e^{-0.00360t})^{-1}$, and $Y_t=146.2(1+0.4501e^{-0.00263t})^1$, respectively. Equations for body length $Y_t=174.1e^{-0.8342e^{-0.00289t}}$, $Y_t=175.8(1-0.2500e^{-0.00265t})^3$, $Y_t=170.0(1+1.1548e^{-0.00363t})^{-1}$, and $Y_t=180.3(1+0.6077e^{-0.00215t})^1$, respectively, for the same models. Among the four models, the Brody model resulted in the lowest mean square error, with mean square errors of 31.79, 30.57, and 42.13, respectively, for wither height, hip height, and body length. Also, an estimated birth wither height, birth hip height, and birth body length (77.98, 80.57, and 70.97 cm, respectively) were lower in the Brody model than in other models. An inflection point was not observed during the growth phase of Hanwoo steer according to the growth curves calculated using Gompertz, Von Bertalanffy, and Logistic models. Based on the results, we concluded that the regression equation using the Brody model was the most appropriate among the four growth models. To obtain more accurate parameters, however, using data from a wider production period (from birth to shipping) would be required, and the development of a suitable model for body conformation traits would be needed.

Investigation into Conservatism of Various Fatigue Life Evaluation Procedures Using Round-Notched CT Specimens (원형 노치 CT 시편을 이용한 다양한 피로수명평가 절차의 보수성 평가)

  • Kang, Ju-Yeon;Chang, Dong-Joo;Kim, Jun-Young;Kim, Sang-Eun;Lee, Jong-Min;Huh, Nam-Su;Kim, Jong-Sung;Kim, Jin-Weon;Kim, Yun-Jae;Kim, Dae-Soo
    • Transactions of the Korean Society of Pressure Vessels and Piping
    • /
    • v.15 no.2
    • /
    • pp.19-30
    • /
    • 2019
  • In this study, to evaluate conservatism of various fatigue life evaluation procedures, fatigue tests were conducted using compact tension (CT) specimens with a round notch, made of A516 Gr.70 carbon steel and A240 TP304 stainless steel, under load-controlled cyclic condition. Experimental fatigue failure cycles were measured and compared with predicted fatigue lives using two different life evaluation methods; (1) Design-By-Analysis (DBA) procedure given in ASME B&PV Code, Sec. III, Div. 1, Subsec. NB-3200 and (2) structural stress-based approach provided in ASME B&PV Code, Sec. VIII, Div. 2, Part 5. To predict fatigue failure cycles, three-dimensional elastic finite element analysis was conducted. Fatigue lives were predicted by both design fatigue curve given in ASME B&PV Code, Sec. III, Div. 1, Appendices and best-fit fatigue curve suggested in NUREG/CR-6815 for the DBA procedure. Finally, fatigue lives evaluated by various methods were compared with test results, and then conservatism between each evaluation procedure was discussed.

High-impact chronic pain: evaluation of risk factors and predictors

  • Ilteris Ahmet Senturk;Erman Senturk;Isil Ustun;Akin Gokcedag;Nilgun Pulur Yildirim;Nilufer Kale Icen
    • The Korean Journal of Pain
    • /
    • v.36 no.1
    • /
    • pp.84-97
    • /
    • 2023
  • Background: The concept of high-impact chronic pain (HICP) has been proposed for patients with chronic pain who have significant limitations in work, social life, and personal care. Recognition of HICP and being able to distinguish patients with HICP from other chronic pain patients who do not have life interference allows the necessary measures to be taken in order to restore the physical and emotional functioning of the affected persons. The aim was to reveal the risk factors and predictors associated with HICP. Methods: Patients with chronic pain without life interference (grade 1 and 2) and patients with HICP were compared. Significant data were evaluated with regression analysis to reveal the associated risk factors. Receiving operating characteristic (ROC) analysis was used to evaluate predictors and present cutoff scores. Results: One thousand and six patients completed the study. From pain related cognitive processes, fear of pain (odds ratio [OR], 0.92; 95% confidence interval [CI], 0.87-0.98; P = 0.007) and helplessness (OR, 1.06; 95% CI, 1.01-1.12; P = 0.018) were found to be risk factors associated with HICP. Predictors of HICP were evaluated by ROC analysis. The highest discrimination value was found for pain intensity (cut-off score > 6.5; 83.8% sensitive; 68.7% specific; area under the curve = 0.823; P < 0.001). Conclusions: This is the first study in our geography to evaluate HICP with measurement tools that evaluate all dimensions of pain. Moreover, it is the first study in the literature to evaluate predictors and cut-off scores using ROC analysis for HICP.

Prediction of Shearing Die Life for Producing a Retainer using FE Analysis (유한요소해석을 이용한 리테이너 전단 금형 수명예측)

  • Lee, I.K.;Lee, S.Y.;Lee, S.K.;Jeong, M.S.;Seo, P.K.;Lee, K.H.;Kim, B.M.
    • Transactions of Materials Processing
    • /
    • v.24 no.4
    • /
    • pp.264-271
    • /
    • 2015
  • In the current study, a method was proposed to quantitatively predict the wear and fatigue life of a shearing die in order to determine an effective replacement period for the die. The shearing die model of a retainer manufacturing process was used for the proposed method of quantitative life prediction. The retainer is produced through shearing steps, such as piercing and notching. The shearing die of the retainer is carefully controlled because the dimensional accuracy of the retainer is critical. The fatigue life for the shearing die was predicted using ANSYS considering S-N curves of STD11 and Gerber’s equation. The wear life for the shearing die was predicted using DEFORM-3D considering the Archard’s wear model. Experimental shearing of the retainer was conducted to verify the effectiveness of the proposed method for predicting die life. The fatigue failure of the shearing die was macroscopically measured. The wear depth was measured using a 3D coordinate measuring machine. The results showed that the wear and fatigue life in the FE analysis agree well with the experimental results.

Quality, Product Quality, and Market Share Increase: A Perspective for Management Decisions

  • Ryu, Dongsu
    • International Journal of Reliability and Applications
    • /
    • v.2 no.3
    • /
    • pp.161-187
    • /
    • 2001
  • Starting with the meaning of the word quality, diverse concepts connoted by the term are examined. Instead of a bathtub curve, the desirable shape of a failure rate covering the entire life of a good product, which might be called hockey-stick line, is introduced. From the hockey-stick line and the definition of reliability, two measurements are extracted. The terms reliability, failure rate, product life, and durability are explained. From the customer's standpoint, the concept of product quality is classified in five factors, according to related technology: performance, reliability, conformance to specifications, customer perception, and fundamentals advantage. The correlation of the five factors for a first-class product is discussed, Since the market share of a company is determined as the competition result of its product value, defined as product quality and price, the market share increase is derived mathematically from the increment of product value. The market share increase, $\Delta$S, can be calculated from the present market share, S, and the oriented relative value increment of new product, R, to the current product in the same company for the same market target: $\Delta$S : $\Delta$(1-S). R/(1+S.R). Finally, the importance of separating warranty cost from the profit equation for the durables is explained.

  • PDF

The Effect of Plastic Working on the Membrane Fatigue Life (소성가공이 멤브레인 피로 수명에 미치는 영향)

  • Yoon I. S.;Kim J. K.
    • Journal of the Korean Institute of Gas
    • /
    • v.9 no.4 s.29
    • /
    • pp.1-5
    • /
    • 2005
  • An investigation was made on the fatigue characteristics of type 304 stainless steel membrane manufactured by plastic working. To investigate the effect of plastic deformation, tests were performed with 5 types of specimens having different amount of plastic deformation. Fatigue tests were executed under both room and LNG temperatures $(-162^{\circ}C)$. All the test results were compared with the fatigue data provided by RPIS (Recommended Practice for Inground LNG Storage Tank). On the basis of these results, it was confirmed that RPIS's design fatigue curve could be applied to evaluate fatigue life of KOGAS membrane manufactured by pressing.

  • PDF

Evaluation of the Fatigue Strength and the Mechanical Properties for Cargo Containment System in LNG Ship (LNG선박용 내조시스템 소재의 기계적 특성 및 피로강도 평가)

  • Shim, Hee-Jin;Kim, Min-Tea;Yoon, In-Su;Kim, Yung-Kyun;Kim, Jung-Kyu
    • Proceedings of the KSME Conference
    • /
    • 2007.05a
    • /
    • pp.1-6
    • /
    • 2007
  • The membrane type LNG(Liquefied Natural Gas) cargo containment system is a special design structure for the large deformation behavior at LNG temperature$(-162^{\circ}C)$. The design of membrane is required great confidence so that membrane can plat role in the tightness of flammable fluid storing. LNG cargo containment is loaded and unloaded LNG between twice and five times in a week. During this process, the membrane has large deformation behavior due to the variation of temperature and pressure to the self weight. In this study, the evaluation of the fatigue strength of membrane is very important to determine the design life of LNG storage tank and to evaluate the mechanical properties at the LNG temperature. Also, in the view point of large deformation, the evaluation method is applied conservatively $\epsilon-N_f$ curve of SUS 304L.

  • PDF

MEAN LOAD EFFECT ON FATIGUE OF WELDED JOINTS USING STRUCTURAL STRESS AND FRACTURE MECHANICS APPROACH

  • Kim, Jong-Sung;Kim, Cheol;Jin, Tae-Eun;Dong, P.
    • Nuclear Engineering and Technology
    • /
    • v.38 no.3
    • /
    • pp.277-284
    • /
    • 2006
  • In order to ensure the structural integrity of nuclear welded structures during design life, the fatigue life has to be evaluated by fatigue analysis procedures presented in technical codes such as ASME B&PV Code Section III. However, existing fatigue analysis procedures do not explicitly consider the presence of welded joints. A new fatigue analysis procedure based on a structural stress/fracture mechanics approach has been recently developed in order to reduce conservatism by erasing uncertainty in the analysis procedure. A recent review of fatigue crack growth data under various mean loading conditions using the structural stress/fracture mechanics approach, does not consider the mean loading effect, revealed some significant discrepancies in fatigue crack growth curves according to the mean loading conditions. In this paper, we propose the use of the stress intensity factor range ${\Delta}K$ characterized with loading ratio R effects in terms of the structural stress. We demonstrate the effectiveness in characterizing fatigue crack growth and S-N behavior using the well-known data. It was identified that the S-N data under high mean loading could be consolidated in a master S-N curve for welded joints.

Time-Temperature Superposition Behavior for Accelerated Fatigue Lifetime Testing of Polycarbonate(PC) (폴리카보네이트(PC)의 가속 피로수명 시험을 위한 시간-온도 호환성)

  • Kim Gyu-Ho
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.30 no.8 s.251
    • /
    • pp.976-984
    • /
    • 2006
  • Time-temperature superposition has been studied to determine the long-term fatigue life over millions of cycles for glassy polymers. π le superposition is supposed to make an accelerated lifetime testing (ALT) technique possible. Dog-bone shaped specimens made of carbon filled Polycarbonate (PC) were tested under fatigue, based on the stress-lifetime approach (S-N curve). Fatigue-induced localized yield-like deformation is considered as the defect leading to fatigue and its evolution behavior is characterized by a modified energy activation model in which temperature is considered as fatigue acceleration factor. This model allows the reduced time concept to account for effects of different temperature in short-term fatigue data to determine long-term fatigue life through the use of time-temperature superposition that is applicable under a low frequency and isothermal conditions. The experimental results validated that the proposed technique could be a possible method for accelerated lifetime testing (ALT) of time-dependent polymeric materials.

High Temperature Properties of Fiber Reinforced Composites under the Different Loading Conditions

  • Weiguang, Hu;Park, Soo-Jeong;Kim, Yun-Hae
    • Composites Research
    • /
    • v.30 no.3
    • /
    • pp.188-192
    • /
    • 2017
  • The mechanical properties of composites are significantly affected by external environment. It is essential to understand the degradation of material performance and judge the material's lifetime in advance. In the current research, changes in mechanical properties of glass fiber and unsaturated polyester composite materials (GFRP, Glass fiber reinforced plastic) were investigated under different bending stress and submerged in hot water at a temperature of $80^{\circ}C$. Loading time of 100 H (hours), 200 H, 400 H, 600 H, 800 H for testing under stresses equal to 0% (stress-free state), 30%, 50% and 70% of the ultimate strength was applied on the GFRP specimens. From the values of bending stress, obtained from three-point bending test, fracture energy, failure time, and life curve were analysed. Moreover, a normalized strength degradation model for this condition was also developed. It was observed that within 100 H, the decline rate of the bending strength was proportional to the pressure.