• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.125-129
• /
• 2004

This study investigates the fatigue lift estimation of butt weld specimen for the railway vehicle by examining butt weld bead profiles. The butt weld beads, which are welded by semi-robot method, have non-uniform bead profiles described by $\theta$, p and h. The stress concentration factors, K$\_$t/, are changed by different $\theta$, p and h from 1.395 to 2.863. Hence, the sensitivity of K$\_$k/ is changed by each $\theta$, p and h. As $\theta$ becomes lower and p and h become higher, K$\_$t/ increases. The fatigue life can be estimated very closely for the AAY specimens without residual stress using only butt weld bead profiles. But, for the AAN specimens with residual stress, the fatigue life must be estimated by considering both the weld bead profiles and the residual stress data.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.641-646
• /
• 2016

Coil specimen was prepared by coating a copper wire with two varnish thin layers: the first was polyamideimide (PAI)/nanosilica (5 wt%) varnish and the second was anti-corona PAI/nanosilica (15 wt%) varnish. Insulation breakdown voltage was investigated under inverter surge condition at $20^{\circ}C$, $70^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, respectively. The insulation lifetime of the two layered coil was tens of times longer than that of original PAI coil. And the insulation lifetime decreased with increasing ambient temperature because there was weak binding strength between copper and varnish layer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.384-389
• /
• 2008

An accelerated fatigue test is essentially required to maintain the reliability of the actual structure of KTX under operation conditions. However, actual fatigue life cannot be obtained if specimens are not adequate to the conventional fatigue test. Moreover component maker did not provide data of loading stress (S) - cycles at the failure (N). In this study, we suggest a prediction method of the S-N curve for establishing an accelerating test under various load levels. Load history was acquired from the field tests. A Rainflow method was used on the cycle counting of the field load data, and then, an S-N curve was obtained through the iteration process under the condition that the damage index satisfies to 1 in the Miner's rule.

• International Journal of Reliability and Applications
• /
• 제15권1호
• /
• pp.65-76
• /
• 2014

In this article, a new model based on Lomax distribution is introduced. This new model is both useful and practical in areas such as economic, reliability and life testing. Some statistical properties of this model are presented including moments, hazard rate, reversed hazard rate, mean residual life and mean inactivity time functions, among others. It is also shown that the distributions of the new model are ordered with respect to the strongest likelihood ratio ordering. The method of moment and maximum likelihood estimation are used to estimates the unknown parameters. Simulation is utilized to calculate the unknown shape parameter and to study its properties. Finally, to illustrate the concepts, the appropriateness of the new model for real data sets are included.

• International Journal of Reliability and Applications
• /
• 제14권1호
• /
• pp.27-39
• /
• 2013

In this article, a new model based on the Rayleigh distribution is introduced. This model is useful and practical in physics, reliability, and life testing. The statistical and reliability properties of this model are presented, including moments, the hazard rate, the reversed hazard rate, and mean residual life functions, among others. In addition, it is shown that the distributions of the new model are ordered regarding the strongest likelihood ratio ordering. Four estimating methods, namely, method of moment, maximum likelihood method, Bayes estimation, and uniformly minimum variance unbiased, are used to estimate the parameters of this model. Simulation is used to calculate the estimates and to study their properties. Finally, the appropriateness of this model for real data sets is shown by using the chi-square goodness of fit test and the Kolmogorov-Smirnov statistic.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.69-80
• /
• 1993

It is important to prevent roll failure in hot rolling process for reducing maintenance coat and production loss. Roll material and rolling conditions such as the roll force and torque have been intensively investigated to overcome the roll failures. In this study, a computer roll life prediction system under working condition is developed and evaluated on IBM-PC level. The system is composed and fatigue estimation models which are stress analysis, crack propagation, wear and fatigue estimation. Roll damage can be predicted by calculating the stress anplification, crack depth propagation and fatigue level in the roll using this computer model. The developed system is applied to a work roll in actual hot rolling process for reliability evaluation. Roll failures can be diagnosed and the propriety of current working condition can be determined through roll life prediction simulation.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.131-138
• /
• 2006

공항 콘크리트 포장은 설계기준을 역순으로 하거나, FWD 장비로부터 얻어진 탄성 계수를 근거로 포장체의 잔존수명을 추정하여 왔었다. 그러나 FWD로부터 얻어진 탄성계수 값은 역산 방법에 따라 변동성이 심하므로 잔존수명의 일관성이 결여된 한계가 있다. 또한 구조적 측면만 고려하여 포장의 상태를 평가하므로. 기능적 측면을 반영하지 못하는 한계가 있었다. 따라서 본 연구에서는 공항 콘크리트 포장의 잔존수명 산출에 있어서 구조적 측면 및 기능적 측면 모두를 고려하는 논리를 제시하였으며, 각 논리별 세부 절차별에 있어서의 기준 및 모델 적용을 제안하였다 구조적 잔존수명 추정 논리를 개선하기 위해 오래된 공항을 대상으로 하여 하중을 받은 구간과 받지 않은 구간에서의 잔존수명 추정 인자 선정을 위한 실험을 실시하였다. 그 결과 기존에 주로 사용되어 왔던 탄성계수보다는 하중전달효율이 잔존수명 추정 인자로 규명되었다. 새롭게 개발한 잔존수명 추정 논리 및 세부 모형들의 현장 적용성을 파악하기 위하며 오래된 공항 한 개소를 선정하였다. 새로운 논리에 따라 현장 실험 및 분석을 수행한 결과 실무에 적용하는데 무리가 없음을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.689-697
• /
• 2005

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, $B_{10}$ life and its lower bound with $90\%$ confidence at worst case use condition are estimated by analyzing the accelerated life test data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1311-1314
• /
• 2005

Recently drum washing machines are required to improve not only functions, but also endurance security. The spider is one of the major parts in a drum washing machine as a power transmission device. It is needed estimating for fatigue life because it rotates at high velocity when the drum washing machine works. In this study, we tried to estimate fatigue life of the Spider with CAE and verified the accuracy by comparing the CAE results with the experimental results. The estimation method of fatigue life for the spider with CAE will be applied to raise the efficiency of time and money in the design process of a new drum washing machine.

• Environmental Analysis Health and Toxicology
• /
• 제30권sup호
• /
• pp.5.1-5.5
• /
• 2015

Objectives To protect public health from risk, the Minister of Environment in Korea legislated an act concerning the registration and evaluation of chemical substances. In this study, we estimated the value of a statistical life (VSL) of carcinogenic chemicals to evaluate the socioeconomic analysis in Korea. Methods The estimation of the health benefit can be calculated through an individual's VSL and willingness to pay (WTP). To estimate the VSL and WTP, we used a contingent valuation method through a web-based survey. Results The survey is conducted with 1434 people living in Seoul and six large cities. An analysis of the survey is essential to review the distribution of the characteristics of the target population. The statistically significant variables affecting the WTP are location, age, household income, quality of life. Through the review of data, we secured statistical validity. The WTP was estimated as 41205 Korean won (KRW)/person, and the estimated VSL appeared as 796 million KRW/person. Conclusions There is a case in which the amount of statistical life value is estimated in connection with domestic environmental policy, fine dust, etc. However, there are no cases of evaluation for chemical. The utilization of this result is possible for conducting other study with chemicals.