• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2680-2692
• /
• 1999

Software quality is classified by quality of process and product. In experience of Quality Management, it is known that quality level of product as it depends on goodness and badness of process and organization. As a result, improvement of software process has been important subject. According as this trends, ISO 12207 is publicated as standard of software life cycle process by ISO. For UML based object oriented development process, it is necessary that we should research detailed definition of activity and task of ISO 12207 process which is added, deleted or tailored in according to organization and project characteristics. In this thesis, by according with ISO 12207 software life cycle process, UML based object oriented development process is proposed. This process is composed of 7 steps and 19 activities including development phase, activity and product to improve quality of reliability. Usefulness of object oriented process for improvement of software quality is proved at three ways, which are comparative analysis of process characteristics, SPICE process evaluation and SPICE rick analysis.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.479-489
• /
• 2019

Low-cycle fatigue (LCF) tests were performed for Alloy 690 and 316 SS in a simulated pressurized water reactor (PWR) environment. Alloy 690 showed about twice longer LCF life than 316 SS at the test condition of 0.4% amplitude at strain rate of 0.004%/s. Observation of the oxide layers formed on the fatigue crack surface showed that Cr and Ni rich oxide was formed for Alloy 690, while Fe and Cr rich oxide for 316 SS as an inner layer. Electrochemical analysis revealed that the oxide layers formed on the LCF crack surface of Alloy 690 had higher impedance and less defect density than those of 316 SS, which resulted in longer LCF life of Alloy 690 than 316 SS in a simulated PWR environment.

• 국제초고층학회논문집
• /
• 제10권1호
• /
• pp.29-34
• /
• 2021

Vertical greenery has become an important technological means to improve the ecological environment condition in urban high-density areas, especially in central areas of Chinese cities. The cost of vertical greenery has significantly increased both in the decision-making process of architectural design and in the assessment of the sustainability potential of urban complexes. The estimation and evaluation of the cost of vertical greenery have become important obstacles to multi-party investment in the construction of vertical greenery. Considering the factors of the building typology and full life-cycle cost, this paper constructs an assessment model of vertical greenery in seven types in urban complex, and suggests an optimized approach to vertical greenery in an urban complex.

• Advances in Energy Research
• /
• 제8권1호
• /
• pp.1-19
• /
• 2022

The application of Photovoltaic (PV) power in the building sector, is expanding as part of the ongoing energy transition into renewables. The article addresses the question of sustainability of energy generated from PVs through an environmental assessment of a building-integrated PV system (BIPV) connected to the grid through net metering. Employing retrospective life cycle analysis (LCA), with the CCaLC2 software and ecoinvent data, the article shows that the carrying structure and other balance of system (BOS) components are responsible for a three times higher energy payback time than the literature average. However, total environmental impact can be lowered through reuse or reinstallation of PVs on the same building structure after the 30-year interval. Further ways to improve environmental efficiency include identifying the most polluting materials for each LCA parameter. The results of this study are of interest to researchers and producers of PVs and organizations investing and promoting decentralized power production through PVs.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.515-519
• /
• 1997

The purpose of this study is to reduce the fast neutron fluence at the reactor pressure vessel(RPV) and to provide a basis for plant-life extension. In this study, different neutron absorbers were employed in the core outer assemblies of Kori Unit 1 Cycle 14. The modified assemblies were used to calculate fast neutron fluence at the RPV and to evaluate reduction of outer assembly power and total power in core. By comparison with the case of no suppression fixture, the fast neutron fluence of a case with two rows stainless steel around the assembly with natural uranium pins is decreased by 85.8%. It is noted that the modification of outer assembly is more efficient than the previous low leakage loading pattern (LLLP) applied to Kori Unit 1. Also, compared fast neutron fluence in Cycle 1 with Cycle 14, fast neutron fluence at the RPV between Cycle 1 and Cycle 14 is not significantly different. It is found that LLLP applied to the Kori Unit 1 has not contributed to fast neutron fluence reduction at the RPV.

• 대한지역사회영양학회지
• /
• 제5권4호
• /
• pp.697-708
• /
• 2000

The purpose of this study is to analyze the contents of the questionnaires used in dietary surveys and to evaluate each item in relation to the item construction strategy. Articles of which the contents were related to food, nutrition, diet, dietary behavior, and related areas. Published from 1997 to 1999 were searched fir and a total of 121 questionnaires were collected and analyzed. The questions in the questionnaires were classified into related areas and sub-areas. Among the keywords in the title of the articles, the term 'nutritional status'(or 'dietary intake status') was most frequently used. The terms such as dietary status, obesity, health, food habit, and dietary behavior were also frequency used. Major topics of the items in the questionnaires varied according to the life cycle of the subjects of the study. The topics most frequently asked in each lift cycle were as follows : overeating, snack, and food preference for preschool- and school-aged children ; anthropometry, weight control, and snack for middle and highschool students : meal skipping, smoking, and drinking for college students : disease, smoking, drinking, and exercise for adults : and smoking, drinking, disease and perceived health for the elderly. Inappropriate questions with complicated language, typographic and grammatic errors, unnecessary words, and negative questions were found. Therefore, care should be taken to construct each question so as to avoid possible misinterpretation. Also, a standardized questionnaire be developed for survey researchers.

• 대한안전경영과학회지
• /
• 제13권4호
• /
• pp.9-16
• /
• 2011

Modern systems become more complex and the demand for systems safety goes up sharply. Thus, the proper handling of the safety requirements in the systems design is getting greatly increased attention these days. Hazard analysis has been one of the active areas of research in connection with systems safety. In this paper, we study a subject on how the hazard analysis results can be incorporated in the systems design. To this end we set up a goal on how to systematically generate safety requirements that should reflect hazard analysis results and be implemented in the systems design and development. To do so, we first review the process for systems design and suggest the associated Model. Then the process and results of hazard analysis are analyzed and Modeled particularly with emphasis on the safety data. The resulting data Model incorporating both the hazard analysis and system life cycle is used in the generation of safety requirements. Based on the developed data Model, the generation of the requirements, the construction of requirements DB, and the change management later on is demonstrated through the use of a computer-aided software tool.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.173-177
• /
• 2020

Wastewater treatment plants (WWTPs) have been recognized as one of the significant greenhouse gas (GHG) generators, due to the complex biochemical reaction and huge consumption of energy and materials. Recently, WWTPs have been built underground and they will be confronted with the challenges of mitigating GHG emissions and improving the quality of treated wastewater. Here, we focus on estimating GHG emissions to set up effective management plans for a WWTP built underground. First, we apply the process-based life cycle assessment (LCA) with an inventory database of the underground WWTP for a case study. Then, we identify significant factors affecting GHG emissions during service life using sensitivity analysis and suggest the proper tactics that could properly reduce GHG emissions from the WWTP.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.193-201
• /
• 2014

This study attempts to utilize the economic efficiency analysis results focused on the break-even point as an indicator for the decision making of commanders and staff. We suggested a method of determining economic life by utilizing logistics information system and commercial program Minitab with a focus on the equipment's operational environment and performance data, whereas previously the equipment's retirement period was simply determined by the current equipment prices and sustainable period.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.167-168
• /
• 2004

The purpose of this study was to find out the relationship between planning components of branded apartments and family life cycles. The web survey was employed in this research, and 110 responses were utilized for data analysis. This research used four family cycles based on the age of the first child - early childhood, elementary school, adolescence, and adulthood. The results of the research showed that the family life cycle of early childhood desired to have space-related features, family with adolescence wanted living-related components, and the family life cycle of adulthood was likely to consume large spaces