• Journal of Agricultural Extension & Community Development
• /
• v.13 no.1
• /
• pp.85-97
• /
• 2006

The purpose of this study was to analyze the current life conditions and welfare needs of rural youth. A questionnaire was developed from the review of literature. The instrument consisted of five separate sections according to the objectives of the study. Data(391) were collected through a questionnaire mailed to 4-H members selected in the sample(580). The rate of analyzed data(387) was 98% using the SPSS. Based on the findings of this study, the following recommendations were made. (1) The various education programs need to be enlarged to rural area. (2) The job getting opportunities and career guidance programs are needed to strengthen for rural youth. (3) The problem-counselling programs and centers should be provided for rural youth. (4) The more leisure and culture facilities should to establish in rural area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.2
• /
• pp.162-168
• /
• 2009

In this study, disk type of thermal barrier coating system for gas turbine blade was isothermally aged in the furnace changing exposure time and temperature. The aging conditions that delamination occurs were determined by the extensive microscopic analyses and bond tests for each aging condition. The delamination map was drawn from the time-temperature matrix form which summarize the delamination conditions. Finally, a method to draw the delamination life diagram of a thermal barrier coating system by using the delamination map was suggested.

• Animal cells and systems
• /
• v.16 no.5
• /
• pp.425-430
• /
• 2012

The southwestern Australian frog Crinia georgiana (Anura; Myobatrachidae) inhabits ephemeral pools in which the tadpoles often face desiccation. Under these conditions selection on tadpoles can be severe and can directly affect fitness during the aquatic as well as the terrestrial developmental stages. A quantitative genetic study using a half-sib breeding design was conducted to understand the genetic effects on larval life-history traits. We found no significant additive genetic variance in any of larval traits. Except for hatching period, heritability estimates based on females were high in egg size, larval period, snout-vent length, and weight at metamorphosis, suggesting non-additive genetic effects. These results indicate that any response to selection during hatching and larval periods should be predominately governed by non-additive genetic effects in C. georgiana.

• International Journal of Reliability and Applications
• /
• v.10 no.2
• /
• pp.101-107
• /
• 2009

In the accelerated tests, the importance of correct failure analysis must be strongly emphasized. Understanding the failure mechanisms is requisite for designing and conducting successful accelerated life test. Under this presumption, a rational method must be identified to relate the results of accelerated tests quantitatively to the reliability or failure rates in use conditions, using a scientific acceleration transform. Most widely used models for relating the results of accelerated tests quantitatively to the reliability or failure rates in use conditions are an accelerated failure time model and a proportional hazards model. The purpose of this research is to compare the usability of the accelerated failure time model and proportional hazards model in the accelerated life tests.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.216-221
• /
• 2008

In this study, disk type of thermal barrier coating system for gas turbine blade was isothermally aged in the furnace changing exposure time and temperature. The aging conditions that determination occurs were determined by the extensive microscopic analyses and bond tests for each aging condition. The delamination map was drawn from the time-temperature matrix form which summarize the delamination conditions. Finally, a method to draw the delamination life diagram of a thermal barrier coating system by using the delamination map was suggested

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.33-38
• /
• 1995

In this study, unsistered, pre-sintered and sintered low purity alumina ceramics were machined with various tools to clarify the machniability, the optimum tool materials and the optimum tool materials and the optimum cutting conditions. The maon conclusions obtained were as follows. (1) Machined withalloy steel tool, the machinabilty of te pre-sintered ceramics becomes better with the decrease of pre-sintering temperature, but that of unsintered ceramics(white body) was extremely poor. (2) In the case of carbide tool K01, the tool life in machining white body was the longest, and the machinabilty of pre-sintered ceramics becomes poorer with the increase of the pre-sintering temperature. (3) In the case of ceramic tool, the 10000-1100 .deg. C pre-sintered ceramics showed te best machinability within a certain cutting speed range. So far as dry machining, the above combination and conditions showed the highest productivity. (4) When the pre-sintered ceramics were wet machined withsintered diamond tool, the tool life becomes extremelylong, and higher cutting speed can be can be used than in the case offull-sintered ceramics. The productivity of wet cutting is much higher than that ofdry cutting.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.982-987
• /
• 2012

Inconel 718 alloy has been widely used in the aerospace, heavy industry and electronic industry. However, the machinability of this alloy is very poor, which is attributed to their inherent high strength that is maintained at elevated temperatures. The tool life is dominant problem in machining difficult-to-cut materials, so it is necessary to select the efficient cutting conditions for the improvement of tool life. In this study, the cutting force, tool wear and surface roughness are investigated in end milling machining under various cutting conditions. By this experiment, the efficient machining condition of this alloy is suggested to adopt in various industries.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.150-155
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$balls were fabricated using different raw materials, sintering aids and sintering conditions. Commercially available Si$_3$N$_4$ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls fer Ball Bearings) with a size of 9.525 mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) microstructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$phase.

• Journal of Family Resource Management and Policy Review
• /
• v.12 no.3
• /
• pp.81-101
• /
• 2008

The purpose of this study is to examine support policies regarding work and family reconciliation, to suggest plans to improve workplace policies, and to suggest directions for further studies. This study looks at OECD's work-life reconciliation policies as well as family friendly workplace policies in Korea to find a way to enhance business' receptiveness and implementation of the policies. By examining women's labor conditions, this study finds that family friendly workplace policies are necessarily imminent in our society of low fertility and ageing. Along with the evaluation of benefit level and the effectiveness of current policies, this study uses data from interviews with working mothers who have had the experience of family friendly benefits. The results of the analyses suggest that the government should focus on improving the workplace environment in companies that do not show bias against the use of family friendly policies. In order to farm more successful policies, future studies are needed to analyze the changes of fertility, working conditions, support programs, and benefits.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.85-93
• /
• 2006

This study was conducted to evaluate the optimal processing conditions of smoke-dried powdered oysters and to determine their shelf-life during storage for development of a natural oyster flavoring substance. The optimal conditions for processing of smoke-dried oyster powder with freshy oyster were as follows. Raw shelled oysters were rinsed with 3% saline solution, drained, boiled for 10 minutes at $98^{\circ}C$, and then smoked for 1 hour at $50^{\circ}C$, followed by drying for 4 hours at $80^{\circ}C$ Smoke-dried oyster powder with oyster scraps were prepared as flavoring material. The smoked oyster scraps were submerged in oyster sauce far 10 minutes at room temperature and then dried with hot air for 5 hours at $50^{\circ}C$. The smoke-dried oysters and smoke-dried oyster scraps were then pulverized to 50 mesh and packed in tea bags or vacuum-packed in laminated plastic film bags (PE/PVDC/CPP, $12{\mu}m/15{\mu}m/50{\mu}m$). Compared to non smoke-dried powdered oysters, the smoking and dipping in oyster sauce enhanced the flavor and prevented lipid oxidation of the smoke-dried powdered oyster product. Shelf-life tests indicated that the vacuum-packaging method preserved the quality of smoke-dried powdered oysters stored for 150 days at room temperature.