• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.695-701
• /
• 2007

This study was carried out to develop a standard methods of mechanized salt-inserting salting process for winter cabbage to produce kimchi. Mid or large scaled mechanized kimchi plants were surveyed to select dominant variables of the mechanized salting process. Salt concentration of salting water, salting time and dewatering time were selected as the dominant variables of the salting process. A series of laboratorial experiment was performed with winter cabbage to determine desirable conditions for the variables. A supplementary experiment with cabbages of the other seasons was executed also to compare the determined conditions each other. Finally the determined conditions of the salting process were tested by plant scale experiments with winter cabbage and proved their validity.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.321-332
• /
• 2013

Costs and expenses are intertwined and incurred throughout an entire construction project, even from the pre-construction phase, and each phase has a different impact on the life cycle cost (LCC). However, the cost breakdown structure (CBS) is different in each phase of a building construction project, which makes it hard to reasonably calculate construction cost. For this reason, the boundary conditions were analyzed in this study based on the life cycle cost break structure (LCCBS). In addition, breakdown factors were analyzed based on the boundary conditions to derive a linkage method. The validity of the linkage method was verified through application to actual construction projects. Through the analysis, it was found that the problem of items being left out was reduced by more than 97.2 percent, and the work was done an average of 6 hours faster compared to the conventional method. It is expected that by applying the new LCC system, LCC will be both reduced and calculated in a more efficient manner.

• Journal of Periodontal and Implant Science
• /
• v.53 no.1
• /
• pp.85-95
• /
• 2023

Purpose: In recent years, guided implant surgery has been widely used for the convenience of patients and surgeons. Further streamlining the surgical procedure would make implant surgery more convenient. Low-speed water-free conditions are often used in guided implant surgery. Therefore, in this study, we attempted to confirm once again whether drilling was safe at a low speed without water. The main purpose of this study was to evaluate whether a simplified drilling protocol that omits some intermediate steps in the drilling process was safe from the viewpoint of heat generation. Methods: D1 density artificial bone blocks were drilled under 50 rpm, 10 N·cm water-free conditions, and the surface temperature was measured using a digital infrared camera. First, drilling was performed with the sequential drilling method, which is the most widely used technique. Second, for each drill diameter, the temperature change was measured while performing simplified drilling with omission of the previous 1, 2, or 3 steps. Results: In sequential drilling, the heat generated during drilling at all diameters was less than the critical temperature of osteonecrosis (47℃) except for the ⌀2 drill. Statistical significance was observed in all groups when comparing sequential and simplified drilling in the ⌀3.2, ⌀3.8, and ⌀4.3 drills (P<0.001). However, in the simplified drilling procedures, the temperature was below the osteonecrosis threshold temperature (47℃) except for the ⌀4.3 drill with the omission of the previous 3 steps (⌀3.0, ⌀3.2, and ⌀3.8). Conclusions: In general, drilling under low-speed, water-free conditions has shown stable results in terms of heat generation. Simplified drilling showed statistically significantly greater heat generation than sequential drilling. However, most of the diameters and omitted steps seem to be clinically acceptable, so it will be useful if an appropriate selection is made according to the patient's clinical condition.

• Food Science of Animal Resources
• /
• v.43 no.5
• /
• pp.840-858
• /
• 2023

This study was designed to compare the quality changes in mackerel fillets stored under different conditions by using hyperspectral imaging (HSI) techniques. Fillets packaged in vacuum were stored for six days under five different conditions: refrigerated at 4℃ (R group); iced at 5±3℃ (I group); kept at an ambient of 17±2℃ (A group); frozen at -18℃ for 24 h and thawed in a refrigerator at 4℃ for 5 h on the sampling day (FTR group); FTR thawed in tap water instead of thawing in a refrigerator (FTW group). The FTR group had the lowest total bacterial count, drip loss, 2-thiobarbituric acid reactive substances, volatile basic nitrogen, and texture profile analysis values among groups during the entire storage period (p<0.05). Scanning electron microscopy revealed that the FTR group had less damage, while the other groups had shrunken muscle tissues. HIS integrated with the partial least squares model yielded reliable and efficient results, with high R²_cv values, for several quality parameters of the mackerel fillets. Overall, the FTR group, involving freezing and thawing in a refrigerator, appears to be the most favorable option for maintaining the quality of mackerel fillets, which could be practically implemented in the industry. HSI is a suitable and effective technique for determining the quality of mackerel fillets stored under different conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.111-117
• /
• 2002

In most machining companies, operators decide the cutting condition, a pair of spindle speed (5) and table federate (F) by experience and subjective judgment. As cutting conditions are determined by operators' experience and ability, inconsistent cutting conditions are given in same operating conditions. The objective of this study is to develop the cutting condition decision system which utilizes shop data and predicts tool life by neural network and eventually leads to the optimal cutting condition. The production time per piece is considered for an optimization object. We will discuss the process of an optimal cutting condition decision by neural network. By this process, a series of shop data is stored. And neural network is constructed for prediction of tool life and the optimal cutting condition is recommended from a cutting condition decision system using the stored shop data. The results show that the developed system is rational in searching the optimal cutting conditions on job operations.

• Child Health Nursing Research
• /
• v.27 no.3
• /
• pp.256-265
• /
• 2021

Purpose: This study presents a translation, cultural adaptation, and psychometric evaluation of two instruments of the Fertility Awareness and Attitudes Towards Parenthood (FAAP) questionnaire (Conditions and Life changes) for use in South Korea. Methods: This methodological study included 166 university students for psychometric evaluation in the sixth step. The first five steps included forward translation, backward translation, committee review, assessment of content validity, and a pre-test. In the sixth step, psychometric properties, including internal consistency, construct validity, and criterion validity, were evaluated. Exploratory factor analysis and confirmatory factor analysis were conducted to identify the structure of the tool and to assess its validity. Results: The Korean version showed acceptable internal consistency. Cronbach's α was .73 for FAAP-Conditions and .83 for FAAP-Life changes. FAAP-Conditions showed a four-factor structure (social conditions, relationship with partner, external environment, and child-rearing support) and FAAP-Life changes had a two-factor structure (reward and burden). In the confirmatory analysis, CMIN/DF, TLI, IFI, SRMR, CFI, and RMSEA were satisfactory. Conclusion: This study provided preliminary evidence of the acceptability, reliability, and validity of the Korean version of the FAAP questionnaire in university students in South Korea. Nonetheless, further evaluation among Korean young adults is warranted to validate this instrument.

• Molecules and Cells
• /
• v.25 no.1
• /
• pp.124-130
• /
• 2008

Astrocyte ion channels participate in ionic homeostasis in the brain. Inward rectifying potassium channels (Kir channels) in astrocytes have been particularly implicated in $K^+$ homeostasis because of their high open probability at resting potential and their increased conductance at high concentrations of extracellular $K^+$. We examined the expression of the Kir2.1 subunit, one of the Kir channel subunits, in the mouse brain by immunohistochemistry. Kir2.1 channels were widely distributed throughout the brain, with high expression in the olfactory bulb and the cerebellum. Interestingly, they were abundantly expressed in astrocytes of the olfactory bulb, while astrocytes in other brain regions including the hippocampus did not show any detectable expression. However, Kir2.1 channel-expressing cells were dramatically increased in the hippocampus by kainic acid-induced seizure and the cells were glial fibrillary acidic protein (GFAP)-positive, which confirms that astrocytes in the hippocampus express Kir2.1 channels under pathological conditions. Our results imply that Kir2.1 channels in astrocyte may be involved in buffering $K^+$ against accumulated extracellular $K^+$ caused by neuronal hyperexcitability under phathophysiological conditions.

• Journal of Plant Biotechnology
• /
• v.43 no.4
• /
• pp.444-449
• /
• 2016

Deep rooting, which enables plants to extract water from greater soil depths, is a critical strategy for improving plant survival under water-deficient conditions. However, as it is difficult to observe intact root systems belowground, several techniques have been developed to screen deep- and shallow-rooting phenotypes in rice. Here, we introduce a simple and convenient method for deep- and shallow-rooting phenotyping using a unique combination of sand, soil, and plastic mesh netting. Vandana, a drought-tolerant rice variety, and Dongjin, a Korean japonica rice variety, were used to analyze root phenotypes. No significant differences in root length were observed in rice grown under irrigated conditions regardless of net position, whereas roots were significantly longer, and ratio of deep root (RDR) values were significantly higher in Vandana rice grown under semi-drought conditions. In summary, this simple and useful method represents a low-cost means of phenotyping the roots of rice and other crops grown in various-sized pots and at multiple plant growth stages.

• Transactions of Materials Processing
• /
• v.26 no.3
• /
• pp.137-143
• /
• 2017

In this study, a wear test method was proposed to predict the wear life of the CrN layer coated on the surface of the press tools for manufacturing the auto-parts with ultra high strength steel (UHSS) with a tensile strength of 1.5 GPa. The pin-on-disc type wear test was carried out to confirm the feasibility and the reproducibility of the wear amount according to the test conditions such as the normal force, the sliding velocity, and the sliding speed. The test conditions were obtained from the finite element stamping analysis and the wear simulation. With the wear amount from the wear test, a prediction model of the wear depth in the CrN coating layer was proposed according to the test conditions with the design of experiments such as Taguchi method and the response surface method. The derived prediction model was then compared to the result of the Archard wear model, fully describing that the proposed model can effectively predict the wear life of the press tools for the auto-parts with UHSS.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.171-177
• /
• 2007

Korean rivers and their surrounding environments have been used excessively for rice production in the past and more recently for construction of urban areas to accomodate the rapidly increasing population. Affected Korean rivers experience dramatic fluctuations in their water levels and have faster currents compared with those in other countries. In order to restore more natural conditions in rivers experiencing such conditions, we employed a partial restoration method, which is designed to achieve physical and biological stability simultaneously. Concrete blocks were introduced to increase the river's physical stability during floods, and terra cottem, a soil enhancer, was used to reduce water loss due to intense heat. These interventions increased the river's ability to hold water and thereby promoted plant growth. This restoration method increased vegetation coverage and species diversity in treated areas, and changed the species composition in treated areas to more closely approximate that of the control site. These results suggest that this method is effective in restoring damaged habitats to more natural conditions.