• 대한기계학회논문집A
• /
• 제39권8호
• /
• pp.807-812
• /
• 2015

리튬 전지는 에너지 밀도가 높고, 소형화 및 경량화가 가능한 이차전지로서 저장된 화학 에너지를 전기화학적 반응을 통해 전기 에너지로 변환하는 장치로 노트북, 휴대폰, 파워-툴 및 자동차 등에 널리 사용되고 있는 에너지원이다. 특히, 파워-툴이나 자동차와 같은 응용분야에서는 고율 충방전을 필요로 하는데, 본 논문에서는 리튬 전지의 고율 방전 특성에 대해서 상용 유한요소 해석 프로그램을 이용하여 전기화학 시뮬레이션을 진행하여 실험 결과와 유사한 전기화학 모델을 완성하게 되었다. 또한, 이러한 전기화학적 해석 모델을 이용하여 고율 방전용 리튬 전지의 한계 방전 전류가 63A 정도라는 것을 해석적으로 예측 할 수 있었고, 이를 바탕으로 고율 방전 시 리튬 전지의 거동에 대해서 이해할 수 있게 되었다.

• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.852-856
• /
• 2011

The lithium ion diffusion coefficients of bare, carbon-coated and Cr-doped $LiFePO_4$ were obtained by fitting the discharge curves of each half cell with Li metal anode. Diffusion losses at discharge curves were acquired with experiment data and fitted to equations. Theoretically fitted equations showed good agreement with experimental results. Moreover, theoretical equations are able to predict lithium diffusion coefficient and discharge curves at various discharge rates. The obtained diffusion coefficients were similar to the true diffusion coefficient of phase transformation electrodes. Lithium ion diffusion is one of main factors that determine voltage drop in a half cell with $LiFePO_4$ cathode and Li metal anode. The high diffusion coefficient of carbon-coated and Cr-doped $LiFePO_4$ resulted in better performance at the discharge process. The performance at high discharge rate was improved much as diffusion coefficient increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.277-278
• /
• 2008

Orthorhombic $LiMnO_2$(o-$LiMnO_2$) has attracted public attentions as a cathode materials of Lithium ion battery because it has low cost and high theoretical discharge capacity of 285mAh $g^{-1}$. In our study, o-$LiMnO_2$ is synthesized by quenching method. To verify their phase structure, X-ray diffraction is accomplished. Test cells are assembled to check electrochemical characteristics using acquired o-$LiMnO_2$ cathode and carbon anode. Charge/Discharge cycling was carried out for 50cycles. And impedance was measured at 1, 2, 5, 10, 30, 50cycle. During cycle test, the max discharge capacity was recorded 139mAh $g^{-1}$ at 10cycle.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.324-329
• /
• 2011

휴대 기기가 고기능화, 다기능화 됨에 따라 다양한 멀티미디어 기능이 요구되면서 배터리를 보다 장시간 이용하면서 더 높은 전력과 에너지가 요구되고 있다. 이에 따라 여러 개의 리튬이온 cell을 연결한 배터리팩이 많이 사용되고 있다. 2개 이상의 cell로 구성된 리튬이온 배터리를 안전하게 사용하기 위해서는 과전압 및 과전류, 고온으로 부터 보호해야 됨은 물론, 수명을 연장하기 위해서 각 cell의 전압을 같게 유지시켜주는 balancing 기능이 반드시 요구된다. 본 논문에서 제안한 IC는 모바일 기기뿐만 아니라 E-bike, 하이브리드 자동차, 전기 자동차 분야에도 적용 가능할 것으로 예상되며, 국내 PMIC 발전에 기여할 것으로 기대된다.

• Journal of Electrochemical Science and Technology
• /
• 제3권1호
• /
• pp.29-34
• /
• 2012

The structural changes of $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material for lithium ion battery during the first charge was investigated in comparison with $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$ using a synchrotron based in situ X-ray diffraction technique. The structural changes of these two cathode materials show similar trend during first charge: an expansion along the c-axis of the unit cell with contractions along the a- and b-axis during the early stage of charge and a major contraction along the c-axis with slight expansions along the a- and b-axis near the end of charge at high voltage limit. In $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode, however, the initial unit cell volume of H2 phase is bigger than that of H1 phase since the c-axis undergo large expansion while a- and b- axis shrink slightly. The change in the unit cell volume for $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ during charge is smaller than that of $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$. This smaller change in unit cell volume may give the $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material a better structural reversibility for a long cycling life.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3303-3310
• /
• 2012

Two single crystals of fully dehydrated partially $Li^+$-exchanged zeolite X were prepared by the exchange of Na-X, $Na_{92}Si_{100}Al_{92}O_{384}$ (Si/Al = 1.09), with $Li^+$ using aqueous 0.1 M $LiNO_3$ at 293 (crystal 1) and 333 K(crystal 2), followed by vacuum dehydration at 623 K and $1{\times}10^{-6}$ Torr for 2 days. Their structures were determined by single-crystal synchrotron X-ray diffraction techniques in the cubic space group $Fd{\overline{3}}$ at 100(1) K. Their structures were refined using all intensities to the final error indices (using the 1281 and 883 reflections for which ($F_o$ > $4{\sigma}(F_o)$) $R_1/R_2$ = 0.075/0.244 and 0.074/0.223 for crystals 1 and 2, respectively. Their compositions are seen to be ${\mid}Li_{86}Na_6{\mid}[Si_{100}Al_{92}O_{384}]$-FAU and ${\mid}Li_{87}Na_5{\mid}[Si_{100}Al_{92}O_{384}]$-FAU, respectively. In crystal 1, 17 $Li^+$ ions per unit cell are at site I', 15 another site I', 30 at site II, and the remaining 16 at site III; 2 $Na^+$ ions are at site II and the remaining 4 at site III'. In crystal 2, 32 and 30 $Li^+$ ions per unit cell fill sites I' and II, respectively, and the remaining 25 at site III'; 2 and 3 $Na^+$ ions are found at sites II and III', respectively. The extent of $Li^+$ exchange increases slightly with increasing ion exchange temperature from 93% to 95%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.252-254
• /
• 2002

In this study, polyurethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte, and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/MCF cells were also prepared and their performances depending on discharge currents and temperatures were evaluated. ionic conductivity of the gel polymer electrolyte with PUA at room temperature and -20$^{\circ}C$ was ca. 4.5 x 10$\^$-3/ S/cm and 1.7${\times}$10$\^$-3/ S/cm, respectively. GPE was stable electrochemically up to 4.5 V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/MCF cell showed a good high-rate and a low-temperature performance.

• 한국산학기술학회논문지
• /
• 제18권8호
• /
• pp.1-7
• /
• 2017

본 논문은 퍼스널 모빌리티에 사용되는 360 Wh급 리튬이온 배터리 팩의 성능 및 안정성 확보를 위하여 리튬이온 배터리 팩의 열전달 특성에 관하여 상용수치해석 프로그램인 ANSYS v17.0의 CFX를 이용하여 수치적으로 연구하였다. 이를 위하여 퍼스널 모빌리티에 사용되는 360 Wh급 리튬이온 배터리 팩의 배터리 셀 배열을 4가지 경우로 변경하고, 배터리 셀 홀더에 사용되는 재질과 배터리 팩 케이스에 사용되는 재질을 각각 Polypropylene, Aluminium, Magnesium alloy로 변경하였다. 그 결과 배터리 평균 온도는 배터리 셀 배열이 Model 2 일 때 가장 낮게 예측되었으며, 배터리 셀 홀더와 배터리 팩 케이스 재질 변경에 따른 배터리 평균 온도는 대부분의 경우 Aluminium 일 때 가장 낮게 예측되었다. 퍼스널 모빌리티에 사용되는 360 Wh급 리튬이온 배터리 팩의 열전달 성능은 배터리 셀 배열과 배터리 팩 케이스 재질에 많은 영향을 받았으며, 배터리 셀 배열 Model 2와 배터리 팩 케이스 재질이 Aluminium 일 때 가장 높았다.

• 산업기술연구
• /
• 제42권1호
• /
• pp.7-12
• /
• 2022

High nickel layered oxide cathodes are gaining increasing attention for lithium-ion batteries due to their higher energy density and lower cost compared to LiCoO₂. However, they suffer from the formation of residual lithium on the surface in the form of LiOH and Li₂CO₃ on exposure to ambient air. The residual lithium causes notorious issues, such as slurry gelation during electrode preparation and gas evolution during cell cycling. In this review, we investigate the residual lithium issues through its impact on cathode slurry instability based on deformed polyvinylidene fluoride (PVdF) as well as its formation and reduction mechanism in terms of inherently off-stoichiometric synthesis of high nickel cathodes. Additionally, new analysis method with anhydrous methanol was introduced to exclude Li⁺/H⁺ exchange effect during sample preparation with distilled water. We hope that this review would contribute to encouraging the academic efforts to consider practical aspects and mitigation in global high-energy-density lithium-ion battery manufacturers.