• 공업화학
• /
• 제16권5호
• /
• pp.689-692
• /
• 2005

스피넬계 $LiMn_2O_4$를 양극 활물질로 사용하는 리튬이온전지의 전기화학적 성능을 향상시키기 위하여 서로 상이한 입자크기를 가지는 Super P Black 및 $Vulcan^{(R)}$ XC-72R을 사용한 이성분계 전도성물질을 제조하였다. 이렇게 이성분계 전도성물질을 사용하여 제조되어진 $LiMn_2O_4$ 전지 시스템은 충 방전 동안의 비용량 및 사이클 수명의 관점에서 특성 평가되었다. 결과적으로 Super P Black 및 $Vulcan^{(R)}$ XC-72R이 3:7의 비율로 구성되어진 이성분계 전도성물질을 사용하였을 때의 전지가 우수한 전기화학적 성능을 보여주었으며 이는 적절한 조합의 ionic diffusion rate와 electric contact에 의해 제어되어졌기 때문인 것으로 여겨진다.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.65-68
• /
• 2012

Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• 전기화학회지
• /
• 제16권3호
• /
• pp.169-176
• /
• 2013

현재 이차전지에서 사용중인 양극활물질은 구조 안정성이 높은 층상구조(Layered Structure)의 리튬 금속 산화물(Solid State Lithium Oxide Compounds)이 주로 사용된다. 최근에는 리튬이차전지의 성능향상을 위해서 음극활물질과 전해질 사이의 계면뿐만 아니라, 양극활물질과 전해질 사이의 계면에 관한 연구가 활발히 진행되고 있으며, 이러한 계면의 연구를 위해서는 음극활물질 뿐만 아니라, 양극활물질의 표면에 관한 연구도 선행적으로 이루어져야 하는 상황이다. 대표적인 리튬금속 산화물질인 니켈산리튬($LiNiO_2$)과 코발트산리튬($LiCoO_2$)은 서로 매우 유사한 구조를 갖는 층상구조의 양극활물질이다. 코발트산리튬이 다양한 실험적, 이론적 연구가 진행된 반면에, 니켈산 리튬은 실험적 연구에 비해서 이론적 연구가 부족하다. 따라서, 본 연구에서는 니켈산리튬의 X-선 회절계 측정 결과(XRD data)에 나오는9개의 표면 방향을 범밀도함수이론(Density Functional Theory)을 이용하여 니켈산리튬 표면의 표면 에너지를 계산하였다. 니켈산리튬의 X-선 회절계 측정 결과(XRD data)에서는 (003), (104), (101), (110) 결정 등등이 순차적으로 주요하게 존재하는 것으로 확인되었다. 그러나 시뮬레이션을 이용한 각각의 표면 에너지 계산 결과, X-선 회절계 측정 결과와 다른 순서로 안정한 표면 에너지가 나타나는 결과를 얻었다. 따라서 에너지적으로 안정한 표면이자, X-선 회절계에서 주요하게 나타나는 (104)와 (101) 방향의 니켈산리튬 표면이 많이 노출되어 Li 이온의 충방전시 리튬의 삽입 탈리에 영향을 줄 것으로 예상된다.

• Applied Microscopy
• /
• 제47권2호
• /
• pp.77-83
• /
• 2017

Drastic development of ubiquitous devices requires more advanced batteries with high specific capacitance and high rate capability. Large-area microstructure characterization across the stacks of cathode, electrolyte and anode might reveal the origin of the instability or degradation of batteries upon cycling charge. In this study, sample preparation methods to observe the cross-section view of the electrodes for battery in SEM and several imaging tips are reviewed. For an accurate evaluation of the microstructure, ion milling which flats the surface uniformly is recommended. Pros and cons of cross-section polishing (CP) with Ar ion and focused ion beam (FIB) with Ga ion were compared. Additionally, a modified but new cross-section milling technique utilizing precision ion polishing system (PIPS) which can be an alternative method of CP is developed. This simple approach will make the researchers have more chances to prepare decent large-area cross-section electrode for batteries.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.627-628
• /
• 2005

In recent years, the rapid growth of portable electronic device market requires higher density characteristics of batteries. The speed at which portability and mobility is advancing hinges much on the battery. What is important is this energy source that engineers design handled devices around the battery, rather than the other way around. Much improvement has been made in reducing the power consumption of portable devices. Currently, the most popular secondary battery is Li-ion battery. Li-ion has won the limelight and become the most prominent battery. This paper reviews the prospect and future of the Li-ion battery.

• Journal of Electrochemical Science and Technology
• /
• 제5권2호
• /
• pp.37-44
• /
• 2014

The $Li-O_2$ battery has been attracting much attention recently, due to its very high theoretical capacity compared with Li-ion chemistries. Nevertheless, several studies within the last few years revealed that Li-ion derived electrolytes based on alkyl carbonate solvents, which have been commonly used in the last 27 years, are irreversibly consumed at the $O_2$ electrode. Accordingly, more stable electrolytes are required capable to operate with both the Li metal anode and the $O_2$ cathode. Thus, due to their favorable properties such as non volatility, chemical inertia, and favorable behavior toward the Li metal electrode, ionic liquid-based electrolytes have gathered increasing attention from the scientific community for its application in $Li-O_2$ batteries. However, the scale-up of Li-$O_2$ technology to real application requires solving the mass transport limitation, especially for supplying oxygen to the cathode. Hence, the 'LABOHR' project proposes the introduction of a flooded cathode configuration and the circulation of the electrolyte, which is then used as an oxygen carrier from an external $O_2$ harvesting device to the cathode for freeing the system from diffusion limitation.

• 한국지능시스템학회논문지
• /
• 제23권3호
• /
• pp.214-219
• /
• 2013

본 논문에서는 모델의 불확실성을 갖는 RC 배터리 모델의 State-of- Charge(SOC)를 추정하기 위한 강인한 고이득 관측기를 설계한다. 일반적으로 SOC를 추정하기 위해 사용하는 RC 배터리 모델은 실제 배터리 셀과 정확하게 일치하지 않고 거기에 따른 모델의 불확실성이 존재하게 된다. 이렇게 불확실성이 존재할 때 그 영향을 최소화하고 보다 정확한 SOC를 추정할 수 있는 강인한 관측기를 설계하는 것이 중요하다. 본 논문에서는 실제 배터리 셀과 RC 배터리 모델 사이에 모델 불확실성이 존재하더라도 정확한 SOC추정을 위하여 강인한 고이득 관측기를 설계한다. 하지만 이러한 강인한 고이득 관측기는 높은 이득으로 발생하는 튐 현상(peaking phenomenon)과 출력 측정오차에 민감하게 반응하여 발생하는 진동(perturbation)이 존재하는 단점이 있다. 그래서 이를 보완하기 위해 슬라이딩 모드 기법을 사용하여 강인한 고이득 관측기를 설계한다. 마지막으로 성능 검증을 위하여 선형 관측기, 고이득 관측기를 이용한 SOC 추정결과를 비교한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.294-294
• /
• 2007

Spinel cathode material $LiMn_2O_4$ is currently studied as a promising cathode material for lithium ion secondary batteries for future applications because of it is low cost, easy to be prepared and capable to be operated in high voltage range. However as a cathode material, $LiMn_2O_4$ performs a poor capacity retention which leads to short cycle life. In this study, stoichiometric $LiMn_2O_4$ was synthesized with granulation method with ion substitution to stabilize its structure and niobium doping to improve its conductivity. These well-mixed powders were calcined at $850^{\circ}C$ for 6 hours and its properties were investigated. Correlations of dopant and electrochemical properties were examined as well.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 전지기술 심포지움
• /
• pp.153-166
• /
• 1998

Lithium ion Batteries commercially available since the early nineties in Japan are going to be more and more important for portable electronic devices and even EV applications. Today several companies around the world are working hard to join to market for Lithium secondary batteries. Based on the growing interest for commercial use of batteries also the materials have to be reviewed in order to meet large scale production needs. The requirements especially for electrolytes for lithium batteries are extremely high. The solvents and the lithium salts should be of highest purity. So the supply of these chemicals including packaging, transportation and storage but also the handling in production are critical items in this field. Frolic impurities are very critical for LiPF6 based electrolytes. The influence of water is tremendous. But also the other protic impurities like alcoholes are playing an Important role for the electrolyte quality. The reaction of these species with LiPF6 leads to formation of HF which further reacts with cathode materials (spinel) and anode. To understand the role of the protic impurities more clearly the electrolyte was doped with such compounds and was analyzed for protic impurities and HF. These results which directly show the relation between impurities and quality will be presented and discussed. In addition several investigations on different packaging materials as well as methods to analyze and handle the sensititive material will be addressed. These questions which are only partly discussed in literature so far and never been investigated systematically cover some of the key parameters for understanding of the battery chemicals. This investigation and understanding however is of major importance for scientist and engineers in the field of Lithium ion and Lithium polymer batteries.