• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.936-943
• /
• 2009

In this study, a risk assessment model based on the ETA (Event Tree Analysis) and FTA (Fault Tree Analysis) is developed according to the procedure of hazard analysis and risk assessment in order to estimate the risk quantitatively. The FTA technique is applied to estimate the branch probability (frequency) and the ETA technique is applied to estimate the consequence for each branch path on the ET (Event Tree). A risk assessment model is developed by the combination of those ETA and FTA. In addition, the reliability and the validity of the risk assessment model are verified by comparing the risk estimated through the developed model with the actual equivalent fatality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2246-2255
• /
• 1997

Gardner proposed an algorithm for timing recovery of BPSK/QPSK signals based on zero-crossing detection technique. When Gardner's method is applied to multi-level PAM signals, it suffers from increased timing jitter due to self noise. To alleviate this problem, an improved algoritjm is proposed in this paper. The timing function is modified so that it zero point at the transition of PAM signals, that results in remarkable reduced timing jitter. The performance of the proposed algorithm is analyzed and compared to that of Garner's one. Finally, analytical results are verified by computer simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.620-628
• /
• 2014

This paper describes the analysis results of channel characteristics in the operating area of satellite OTM (On-The-Move) terminal. The communication channel between the Koreasat-5 and OTM terminal on a test car was measured and recorded in downtown of Daejeon, using the received beacon signal of around 20 GHz. And the measurement data were statistically analyzed and then compared with highway and national road environments. The statistical evaluation of satellite channel was conducted by using probability density function and Markov model and then presented average connection duration(ACD), average fade duration(AFD), and level crossing rate(LCR) of downtown environment.

• Smart Structures and Systems
• /
• v.16 no.3
• /
• pp.555-577
• /
• 2015

In the work at hand, the development of a morphing flap, actuated through shape memory alloy load bearing elements, is described. Moving from aerodynamic specifications, prescribing the morphed shape enhancing the aerodynamic efficiency of the flap, a suitable actuation architecture was identified, able to affect the curvature. Each rib of the flap was split into three elastic elements, namely "cells", connected each others in serial way and providing the bending stiffness to the structure. The edges of each cell are linked to SMA elements, whose contraction induces rotation onto the cell itself with an increase of the local curvature of the flap airfoil. The cells are made of two metallic plates crossing each others to form a characteristic "X" configuration; a good flexibility and an acceptable stress concentration level was obtained non connecting the plates onto the crossing zone. After identifying the main design parameters of the structure (i.e. plates relative angle, thickness and depth, SMA length, cross section and connections to the cell) an optimization was performed, with the scope of enhancing the achievable rotation of the cell, its ability in absorbing the external aerodynamic loads and, at the same time, containing the stress level and the weight. The conceptual scheme of the architecture was then reinterpreted in view of a practical realization of the prototype. Implementation issues (SMA - cells connection and cells relative rotation to compensate the impressed inflection assuring the SMA pre-load) were considered. Through a detailed FE model the prototype morphing performance were investigated in presence of the most severe load conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.815-821
• /
• 1994

Short-term fading in a mobile radio channel is mainly caused by multipath reflected wave by local scatterers or natural obstacles surrounding a mobile unit. In this paper, we analyze probability density function(PDF), level crossing rate(LCR) and widths and depths of fades for the measured field strength data in Seoul and Daejeon areas. As a result, the satatistical distribution of signal variations within any small area with the constant mean value becomes the Rayleigh distribution The variation of fade depths is small regardless of the environment such as urban, suburban. etc. However, the variation of fade widths is large with the change of circumstantial structures and environment. the maximum level crossing rate is obtained near the mean value.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.475-480
• /
• 2005

Information of the maximum Doppler frequency enable to optimize many channel-adaptive techniques and radio resource management methods for mobile radio communication systems. In this paper, we propose two maximum Doppler frequency estimators which are based on the level crossing rate(LCR) and the covariance function (COV). To eliminate the effect of additive noise, we analyze the conditions for the estimators independent of the signal-to-noise ratio(SNR) and implement the conditions with a simple downsampling process. The proposed methods achieve good SNR-independent performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.347-358
• /
• 1998

The possibility of modeling the complex and diversified radio environment using Rician channel has been considered. The signals received in Rician channel have been simulated using the computer simulator. The PDF(Probability Density Function of the Envelope amplitude), PSD(Power Spectral Density), LCR(Level Crossing Rate), ADF(Average Duration of Fades) and BER(Bit Error Rate) of the simulated signal have been compared with those of theory. They were shown to be in good agreement.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1291-1295
• /
• 2004

This paper proposed a new approach for endpoint detection of isolated speech, which proves to significantly improve the endpoint detection performance. The proposed algorithm relies on the root mean square energy (rms energy), zero crossing rate and spectral characteristics of the speech signal where the Euclidean distance measure is adopted using cepstral coefficients to accurately detect the endpoint of isolated speech. The algorithm offers better performance than traditional energy-based algorithm. The vocabulary for the experiment includes English digit from one to nine. These experimental results were conducted by 360 utterances from a male speaker. Experimental results show that the accuracy of the algorithm is quite acceptable. Moreover, the computation overload of this algorithm is low since the cepstral coefficients parameters will be used in feature extraction later of speech recognition procedure.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.254-261
• /
• 2004

Recently because of high-speed operation of trains, railway crossings become more and more hazardous components among the whole ones of railway system. It is desirable to remove all the railway crossings for reducing fatalities at railway crossings. it is impossible to eliminate all the crossings for unrealistic investment, so it should be considered to construct multi-level crossings by the order of priority. In this paper operation conditions, various hazard factors on the train accident at domestic railway crossings and foreign cases of risk-based safety assessment models are reviewed and then necessary record data that be added and modified, some essential considerations for developing railway crossing safety assessment software program are proposed.