Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A SMA-based morphing flap: conceptual and advanced design

  • Received : 2014.03.30
  • Accepted : 2015.03.28
  • Published : 2015.09.25
⟨ Previous Next ⟩

Abstract

In the work at hand, the development of a morphing flap, actuated through shape memory alloy load bearing elements, is described. Moving from aerodynamic specifications, prescribing the morphed shape enhancing the aerodynamic efficiency of the flap, a suitable actuation architecture was identified, able to affect the curvature. Each rib of the flap was split into three elastic elements, namely "cells", connected each others in serial way and providing the bending stiffness to the structure. The edges of each cell are linked to SMA elements, whose contraction induces rotation onto the cell itself with an increase of the local curvature of the flap airfoil. The cells are made of two metallic plates crossing each others to form a characteristic "X" configuration; a good flexibility and an acceptable stress concentration level was obtained non connecting the plates onto the crossing zone. After identifying the main design parameters of the structure (i.e. plates relative angle, thickness and depth, SMA length, cross section and connections to the cell) an optimization was performed, with the scope of enhancing the achievable rotation of the cell, its ability in absorbing the external aerodynamic loads and, at the same time, containing the stress level and the weight. The conceptual scheme of the architecture was then reinterpreted in view of a practical realization of the prototype. Implementation issues (SMA - cells connection and cells relative rotation to compensate the impressed inflection assuring the SMA pre-load) were considered. Through a detailed FE model the prototype morphing performance were investigated in presence of the most severe load conditions.

Keywords

References

  1. Advisory Council for Aviation Research and Innovation in Europe, ACARE http://www.acare4europe.org/sites/acare4europe.org/files/attachment/SRIA%20Volume%201.pdf
  2. Ameduri, S., Brindisi, A., Tiseo, B., Concilio A. and Pecora, R. (2013), "Optimization and integration of shape memory alloy (SMA)-based elastic actuators within a morphing flap architecture", J. Intell. Mat. Syst. Str., 23(4) 381-396. https://doi.org/10.1177/1045389X11428672
  3. Carruthers, A.C., Walker, S.M., Thomas, A.L.R. and Taylor, G.K. (2010), "Aerodynamics of aerofoil sections measured on a free-flying bird", J. Aerospace Eng., 224(8), 855-864.
  4. Concilio, A. and Ameduri, S. (2013), "Influence of structural architecture on linear shape memory alloy actuator performance and morphing system layout optimization", J. Intell. Mat. Syst. Str., 1045389X13517306, first published on-line, December 31, 2013.
  5. Daniele, E., De Fenza, A. and Della Vecchia, P. (2012), "Conceptual adaptive wing-tip design for pollution reductions", J. Intell. Mat. Syst. Str., 23(11), 1197-1212. https://doi.org/10.1177/1045389X12445030
  6. Dimino, I. and Concilio, A. (2013), "An adaptive control system for wing TE shape control", Proceedings of the SPIE International Conference on Smart Structures, San Diego, California, March.
  7. Grigorie, T.L., Popov, A.V., Botez, R.M., Mamou, M. and Mebarki, Y. (2011a), "On-off and proportional-integral controller for a morphing wing. part 1: actuation mechanism and control design", J. Aerospace Eng., 226(2), 131-145.
  8. Grigorie, T.L., Popov, A.V., Botez, R.M., Mamou, M. and Mebarki, Y. (2011b), "On-off and proportional- integral controller for a morphing wing. part 2: control validation - numerical simulations and experimental tests", J. Aerospace Eng., 226(2), 146-162.
  9. Langbein, S. and Welp, E.G. (2009), "One-module actuators based on partial activation of shape memory components", J. Mater. Eng.Perform., 18(5-6), 711-716. https://doi.org/10.1007/s11665-009-9383-0
  10. Lesieutre, G.A., Browne, J.A. and Frecker, M.I. (2011), "Scaling of performance, weight, and actuation of a 2-d compliant cellular frame structure for a morphing wing", J. Intell. Mat. Syst. Str., 22(10), 979-986. https://doi.org/10.1177/1045389X11412641
  11. Maheri, A. and Isikveren, A.T. (2011), "Design of a single-dof kinematic chain using hybrid GA-pattern search and sequential GA", J. Mech. Eng. Sci., 226(6), 1634-1643.
  12. Mcknight, G., Doty, R., Keefe, A., Herrera, G. and Henry, C. (2010), "Segmented reinforcement variable stiffness materials for reconfigurable surfaces", J. Intell. Mat. Syst. Str., 21(17), 1783-1793. https://doi.org/10.1177/1045389X10386399
  13. Nadar, A., Khan, R., Jagnade, P., Limje, P., Bhusari, N. and Singh, K. (2013), "Design and analysis of multi-section variable camber wing", Int. J. Mech. Eng. Robot., 1(1), 122-128.
  14. Olympio, K.R. and Gandhi, F. (2010), "Flexible skins for morphing aircraft using cellular honeycomb cores", J. Intell. Mat. Syst. Str., 21(17), 1719-1735. https://doi.org/10.1177/1045389X09350331
  15. Pecora, R., Amoroso, F., Magnifico, M. and Concilio, A. (2013), "Design and experimental validation of a morphing wing flap device", Proceedings of the 6th ECCOMAS Conference on Smart Structures and Materials, SMART2013, Turin, Italy, June.
  16. Smart Intelligent Aircraft Structures, SARISTU, http://www.saristu.eu
  17. Stanewsky, E. (2001), "Adaptive wing and flow control technology", Prog. Aerosp. Sci., 37(7), 583-667. https://doi.org/10.1016/S0376-0421(01)00017-3
  18. Tomassetti, G., Ameduri, S. and Carozza, A. (2011), "Innovative streamline-flow preserving actuation strategies for wing airfoil nose", Int. J. Struct. Integrity, 2(4), 437- 457. https://doi.org/10.1108/17579861111183939
  19. Wildschek, A., Havar, T. and Plotner, K. (2010), "An all-composite, all-electric, morphing trailing edge device for flight control on a blended-wing-body airliner", J. Aerospace Eng., 224(1), 1-9.
  20. Zhao, J.S., Ye, L., Chu, F. and Dai, J.S. (2012),"Synthesis and static analysis of the deployable frame for a morphing wing", J. Mech. Eng. Sci., 227(3), 565-579.

Cited by

  1. Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing vol.30, pp.2, 2017, https://doi.org/10.1016/j.cja.2017.02.001
  2. Electro-Actuation System Strategy for a Morphing Flap vol.6, pp.1, 2015, https://doi.org/10.3390/aerospace6010001