• Journal of Korea Game Society
• /
• v.15 no.4
• /
• pp.169-178
• /
• 2015

Providing various levels of difficulty of game play is one of important considerations in game development. In this paper, we propose a method for obtaining the challenges that will be placed on the track of an one-player car driving game. Herein challenges denote obstacles on the track, and the level of difficulty is represented by an estimated time needed for driving one lap of the track. In the proposed method, the problem for finding challenge placement is modeled as an IP(Integer Programming) one, and then LP relaxation and Simultaneous Annealing are employed to find a solution. To the experiment with the proposed method, we can obtain challenge placements to approximately meet given target driving times. Also, after practically driving on the track where those obtained challenges are being placed, it is seen that the average driving times approximate the target driving times of those challenge placements. Our method can allow game play with various levels of difficulty so that the users' interest and the level of immerse are expected to be raised.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.737-744
• /
• 2007

It need estimation model who is efficient and estimate correctly organization's information security level to achieve effectively organization's information security target. Also, estimate class information security level for this and need reformable estimation indicator or standard and estimation methodology of information security systems that application is possible should be studied in our country. Therefore many research centers including ISO are preparing the measuring and evaluating method for network duality. This study will represent an evaluating model for network security based on checklist. In addition, we propose ah measuring and evaluating method for network performance. The purpose of two studies is to present the evaluating procedure and method for measuring security of network on set workwill be identified and a measuring method and procedure will be proposed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.42-46
• /
• 2023

Purpose The reference range described in Adrenocorticotropic Hormone reagent used in our laboratory is 10-60 pg/mL at 8 a.m. to 10 a.m., and 6-30 pg/mL at 8 p.m. to 10 p.m. However, in the case of outpatients, blood is mainly collected between 10 a.m. and 6 p.m., accounting for 57.8% of the total. Therefore, This study is intended to help make a more accurate diagnosis by reevaluating the reference range provided by the manufacturer of the Adrenocorticotropic Hormone reagent and setting split-timed reference range. Materials and Methods The patients collected blood before 10 a.m. were group A (68 people), and the patients collected blood after 10 a.m. were set to group B (80 people). A T-test was performed between groups to test their significance. And it was confirmed whether it was necessary to set the gender classification as a subgroup. The method of setting the reference range was calculated by the Bayesian's method and the Hoffmann's method. Results The reference range of Group A was 8.6 to 60.6 pg/mL by the Bayesian's method, and the Hoffmann's method was 3.6 to 61.3 pg/mL. The reference range of Group B was 6.9 to 50.5 pg/mL when applying the Bayesian's method, and the Hoffmann method's was 2.3 to 48.9 pg/mL. Conclusion This study was concluded that it was necessary to set the split-timed reference range. Through this study, the later the blood collection time, the lower the level of Adrenocorticotropic Hormone, indicating that blood collection time is important for patients with clinical significance. If a large number of subjects are selected and supplemented in the future, it is believed that systematic and accurate reference range can be set.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.387-390
• /
• 2000

This paper proposes an efficient and accurate power estimation method for Application Specific Instruction set Processors (ASIPs). Proposed method takes advantage of the data types of variables in application program to be executed on the ASIP. According to the experimental results, the efficiency of proposed method was more than 1000 times as high as that of conventional RTL based power estimation method, and the estimation error was within 10% compared to a conventional gate-level accurate power estimation method

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.671-678
• /
• 2021

In a previous study, technology protection levels were set on a qualitative basis. That study lacked quantitative standards, so here, we conduct a study to complement the previous study and to present an objective standard. This paper provides a method of setting a technical protection level that applies statistical analysis. To set the technology protection level, statistical analysis of six technical survey items is performed first. Second, the technical survey items are analyzed by AHP to quantify the opinions of experts in order to derive weights for each technical survey item. Finally, by using the normal distribution scatter map and median calculation method, the technology protection level is selected in three stages using the final detailed factor technology score reflecting the weight. The technology protection level methodology developed through this study is the first methodology with objectivity that can evaluate defense technology by level. If this methodology is applied in practice, it is believed that it will provide a scientific and quantitative technology value judgment criterion when setting the technology protection level in the future.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.158-161
• /
• 2008

In the line array roll set (LARS) process, the initial plate is progressed into the final shape in a stepwise or pathwise manner according to the basic principle of the incremental forming process. The deformation proceeds simultaneously in the longitudinal and transverse directions. It was found that the curvature level of the formed plates in the previous study was well over the curvature required in shipyards. This fact shows that the LARS method has considerable potential for shipbuilding applications. In this study, several experiments with the LARS system is carried out fur manufacturing of plates with large curvatures. The bulbs at a stem and stern among ship hull plates correspond to these plates. Furthermore, the qualities of formed plates are evaluated according to the types of roll arrangements through experimental and numerical analyses.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.257-261
• /
• 1997

Patents often serve as leading indicators of technological change. This patenting activity reflected R&D (Research & Development) of new technology. The purpose of this study is to set up a forecasting model that anticipate the number of domestic patent applications and the number of patents granted relating to R&D inputs (R&D expenditure, R&D manpower) at the level of three industrial sectors in Korea : electrical-electronic, machinery, chemical etc. In this study, forecasting models were used trend extrapolation and a set of regressions. Both Theil's inequality coefficient and MAE(Mean Absolute Error) were utilized to test the precision of predicted value. The patent data and the R&D data were based on Indicators of Industrial Technology data throught 1980 to 1996. The major results obtained in this study are as follows (1) The regression model is more useful for forecasting the trends of the number of patent applications and patents granted than the trend extrapolation method. (2) The variance of Theil's inequality is smaller in patent applications than in patent granted.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1307-1311
• /
• 2004

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. They can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module an optimal design technique and horizontal split die were investigated for determining appropriate dimensions of components of multi-former die set. It is constructed that the proposed method can be beneficial for improving the tool life of die set at practice.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.96-105
• /
• 1992

A study on the construction of a CAD/CAM system operated by 16 Bit PC basic language, for machining sculptured surface of die, was carried out. The system consists of 2 steps i.e., process for geometric modelling by wire frame and process for machining data generation. Geometric modelling for sculptured surface is made by the point data fitting, parallel sweeping, normal sweeping and linear connection of cross section curve. Machining data are gained by cutter off-set of geometric model data and machining carried out by DNC. This system is to be proved enough for rough cutting by actual machining experiment. But, for becoming a high level system, another method of cutter off-set has to be regarded and system must be reconstructed by another program language.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.9
• /
• pp.1267-1271
• /
• 2002

The conformation dependences of basis set superposition errors (BSSE) for 1,2-difluoroethane (DFE) and 1,2-dimethoxyethane (DME) molecules have been estimated using counterpoise method at the Moller-Plesset second order perturbation (MP2) level of theory with various basis sets, assuming that all BSSE dependences on conformations are due to the change in CC bond. The BSSE on the energy differences between eclipsed and gauche forms of DFE are in the range of 0.2-1.2 kcal/mol and those between local minima, gauche and anti forms, are less than 0.2 kcal/mol. For the larger DME molecule, the BSSE differences between local minima are still less than 0.4 kcal/mol, but may not be ignored compared to the energy differences of 0.2-3.0 kcal/mol between conformers.