• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2014

Using a level set method and topological derivatives, a topological shape optimization method that is independent of an initial design is developed for linearly elastic structures. In the level set method, the initial domain is kept fixed and its boundary is represented by an implicit moving boundary embedded in the level set function, which facilitates to handle complicated topological shape changes. The "Hamilton-Jacobi(H-J)" equation and computationally robust numerical technique of "up-wind scheme" lead the initial implicit boundary to an optimal one according to the normal velocity field while minimizing the objective function of compliance and satisfying the constraint of allowable volume. Based on the asymptotic regularization concept, the topological derivative is considered as the limit of shape derivative as the radius of hole approaches to zero. The required velocity field to update the H-J equation is determined from the descent direction of Lagrangian derived from optimality conditions. It turns out that the initial holes are not required to get the optimal result since the developed method can create holes whenever and wherever necessary using indicators obtained from the topological derivatives. It is demonstrated that the proper choice of control parameters for nucleation is crucial for efficient optimization process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.52-58
• /
• 2006

Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.1-7
• /
• 2016

As new information and communication technologies evolve, security threats are also becoming increasingly intelligent and advanced. In this paper, we analyze the time series data continuously entered through a series of periods from the network device or lightweight IoT (Internet of Things) devices by using the statistical technique and propose a system to detect abnormal behaviors of the device or abnormality based on the analysis results. The proposed system performs the first level abnormal detection by using previously entered data set, thereafter performs the second level anomaly detection according to the trust bound configured by using stored time series data based on time attribute or group attribute. Multi-level analysis is able to improve reliability and to reduce false positives as well through a variety of decision data set.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.255-261
• /
• 2016

Korean Power System are operating a load shedding system to prevent voltage instability phenomenon caused by severe line contingencies. In order to apply the load shedding scheme should be selected a location, amount, delay time. Current load shedding system is load shedding amount that has been calculated in the steady-state analysis to load shed the total amount in first level, load shedding amount calculated in advance, it is possible to perform an unnecessary load shedding. In this paper, set a multi-level load shedding control strategy step-by-step selection of load shedding amount for the prevention of excessive load shedding. In addition, through a voltage resilience analysis of the power system by applying motor load ratio and sensitivity parameter to selection the multi level load shedding ratio and delay time. For this reason, to take advantage of the limit data of interchange power, by utilizing interface power flow data to set a multi-level load shedding control strategy for the stabilization of the Korean Power System.

• Journal of computational fluids engineering
• /
• v.20 no.1
• /
• pp.16-25
• /
• 2015

The present study investigates the sloshing phenomena in a two-dimensional rectangular tank at a low filling level by using a level set method based on finite volume method. The code validations are performed by comparing between the present results and previous numerical and experimental results, which gives a good agreement. Various excitation frequencies and excitation amplitude of the 30% filling height tank have been considered in order to observe the dependence of the sloshing behavior on the excitation frequency and amplitude. Regardless of excitation amplitude, the maximum value of wall pressure occurs when the excitation frequency reaches the natural frequency. The time sequence of free surface and corresponding streamlines for excitation frequencies have been presented to analysis the variation of wall pressure according to time, which contributes to explain the double peaks in the time variation of wall pressure.

• Korean Journal of Veterinary Service
• /
• v.24 no.2
• /
• pp.117-126
• /
• 2001

To ensure the safety of domestic livestock products, the government made it obligatory to enforce the hazard analysis critical control point(HACCP) in all domestic slaughterhouses. Under the HACCP, most of the hazards generated in slaughterhouses are bio-hazards, especially pathogenic bacteria. In order to reduce to the pathogenic bacteria, critical control point (CCP) is established and controled in the process of slaughter. A study was carried out to measure the level of bacterial contamination of swine carcass in 6 slaughterhouses selected. As a result, the aerobic plate counts(cfu/$\textrm{cm}^2$) of all samples was $10^2$-10 in average, except slaughterhouse C. The level of the aerobic plate counts on the surface of lower loin in slaughterhouse C was $10^4$ and it was considered that slaughterhouse C should set the process of manual transport of carcass as the CCP. Escherichia coli level was the highest in middle line cut surface. Especially, E coli level of slaughterhouses C and D were about 6.5- and 3.0-fold higher than that of other 4 slaughterhouses. Thus, it was considered that the slaughterhouses C and D should set the process of the entrails treatment as the CCP. The air contamination was measured at two point in a slaughterhouse. The air contamination level was 4-13 times higher than that of the standard Japanese slaughterhouses.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1575-1579
• /
• 1999

Embedded processors often accommodate two instruction sets, a standard instruction set and a compressed instruction set. With the compressed instruction set, code size can be reduced while instruction count (and consequently execution time) can be increased. To achieve code size reduction without significant increase of execution time, this paper proposes a new compressed instruction set architecture, called TOE (Two Operations Execution). The proposed instruction set format includes the parallel bit that indicates an instruction can be executed simultaneously with the next instruction. To add the parallel bit, TOE instruction format reduces the destination register field. The reduction of the register field limits the number of registers that are accessible by an instruction. To overcome the limited accessibility of registers, TOE adapts non-homogeneous register partition in which registers are divided into multiple subsets, each of which are accessed by different groups of instructions. With non-homogeneous registers, each instruction can access only a limited number of registers, but an entire program can access all available registers. With efficient non-homogeneous register allocator, all registers can be used in a balanced manner. As a result, the increase of code size due to register spills is negligible. Experimental results show that more than 30% of TOE instructions can be executed in parallel without significant increase of code size when compared to existing Thumb instruction set.

• MALSORI
• /
• no.35_36
• /
• pp.145-155
• /
• 1998

This study intended to determine the most appropriate POS(Part of Speech) sets for predicting prosodic boundary strength efficiently. We used 3-level POB bets which Kim(1997), one of the authors, has devised. Three POS sets differ from each other according to how much grammatical information they have: the first set has maximal syntactic and morphological information which possibly affects prosodic phrasing, and the third set has minimal one. We hand-labelled 150 sentences using each of three POS sets and conducted perception test. Based on the results of the test, stochastic language modeling method was used to predict prosodic boundary strength. The results showed that the use of each POS set led to not too much different efficiency in the prediction, but the second set was a little more efficient than the other two. As far as the complexity in stochastic language modeling is concerned, however, the third set may be also preferable.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.16 no.1
• /
• pp.31-49
• /
• 2012

In this paper, we propose a very efficient method which reconstructs the high resolution surface from a set of unorganized points. Our method is based on the level set method using adaptive octree. We start with the surface reconstruction model proposed in [20]. In [20], they introduced a very fast and efficient method which is different from the previous methods using the level set method. Most existing methods[21, 22] employed the time evolving process from an initial surface to point cloud. But in [20], they considered the surface reconstruction process as an elliptic problem in the narrow band including point cloud. So they could obtain very speedy method because they didn't have to limit the time evolution step by the finite speed of propagation. However, they implemented that model just on the uniform grid. So they still have the weakness that it needs so much memories because of being fulfilled only on the uniform grid. Their algorithm basically solves a large linear system of which size is the same as the number of the grid in a narrow band. Besides, it is not easy to make the width of band narrow enough since the decision of band width depends on the distribution of point data. After all, as far as it is implemented on the uniform grid, it is almost impossible to generate the surface on the high resolution because the memory requirement increases geometrically. We resolve it by adapting octree data structure[12, 11] to our problem and by introducing a new redistancing algorithm which is different from the existing one[19].

• Physical Therapy Korea
• /
• v.23 no.1
• /
• pp.55-64
• /
• 2016

Background: The International Classification of Functioning, Disability, and Health-core set (ICF-core set) for children and youth (CY) with cerebral palsy (CP) provides a useful conceptual framework and a guide for health care planning and measuring the changes brought by interventions across a multitude of dimensions from body functions to personal activities, social participation, and environmental factors for them. Objects: This single case study was reported to illustrate the use of a goal directed approach in applying the ICF-core set for CY with CP from a physical therapist perspective. Methods: An eleven year old boy with spastic CP, Gross Motor Function Classification System (GMFCS) level V, and his mother participated in an evaluation of his functioning state. The intervention goal was set through an interview using the ICF-core set, Canadian Occupational Performance Measure (COPM) and Goal Attainment Scale (GAS). Physical therapy was carried out on an outpatient basis using a goal directed approach for 30 min, 1 time/week during 12 weeks and the boy's gross motor function was assessed using the Gross Motor Function Measure (GMFM)-66 version (item set 2) before and after the intervention. Results: As measured by the boy's mother, the COPM score showed a meaningful clinical change (performance=mean 3.5, satisfaction=mean 2.5) and the T-score of GAS changed 34.4 after the goal directed approach. The GMFM-66 (item set 2) score changed from 31.8 to 38.7 and evaluation using the ICF-core set displayed improvement in 6 items of activity level between before and after the intervention. Conclusion: The ICF-core set for CY with CP is useful for understanding the overall functioning of CY with this condition and provides an opportunity to share and integrate information and opinions from different disciplines. We consider it as a useful tool in the universal language for the therapy and education of CY with CP.