• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.398-410
• /
• 1982

Summer crops grown in uplands are greatly diversified and show a large variation in difference with year and location in Korea. The principal factor for the variation is weather, in which precipitation and temperature play a leading role and such a weather factors as wind, sun lights also influence production of the summer crops. Since artificial control of weather conditions as a main stress factor for crop production is almost impossible, it must be minimized only by an improvement of cultivation techniques and crop improvement. Precipitation plays a role as one of the most important factor for production of the summer crops and it is considered in two aspects, drought and excess moisture. This country, which belongs to monsoon territory, necessarily encounter one of this stress almost every year, even though the level is different. Therefore, the facilities for both drought and excess moisture are required, but actually it is not easy to complete for them. On this account, crops tolerant to drought, excess moisture and pests should be considered for establishing summer crops. For the districts damaged habitually every season, adequate crops should be cultured and appropriate method of planting, drainage and weed control should be applied diversely. Injuries by temperature is mainly attributed to lower temperature particularly in late fall and early spring, although higher temperature often causes some damages depending upon the kind of crops. Sometimes, lower temperature in summer season playa critical role for yield reduction in the summer crops. However, certain crops are prevented to some extent from this kind of stress by improving varieties tolerant to cold, hot weather or early maturing varieties. As is often the case, control of planting time or harvesting is able to be a good management for escaping the stress. Lodging, plant diseases and pests are considered as a direct or indirect damage due to weather stress, but these are characters able to be overcome by means of crop improvement and also controlled by other suitable methods. In addition, polytical supports capable of improving constitution of agriculture into modern industry is urgently required by programming of data for the damages, establishment of damage forecasting and compensation system.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.2
• /
• pp.135-151
• /
• 2007

The purpose of this study was to examine the work environments of dental hygienists, to find out about what problems there were with their work environments and ultimately to help improve their work environments. It's basically intended to pave the way for furthering the welfare and interests of dental hygienists. The subjects in this study were dental hygienists who were selected by random sampling from among the members of Korean Dental Hygienists Association. Approximately 20 percent of the members each were selected from every region across the nation, and their work environments were investigated in consideration of the kind of their workplaces, service area, career and field of duties. As for the demographic characteristics of the dental hygienists investigated, there were differences between those who worked in the field of health care and the clinical workers. More of the former were older and married, and the former was ahead of the latter in career and education as well. Regarding working hours and leave of absence by kind of workplace, the number of regular average holidays was different according to their place of employment. Dental hospitals(6.66 days) and dental clinics(6.81 days) gave their employees less days off on the whole, whereas public dental clinics(19.29 days) granted the dental hygienists the longest leave of absence. Also, there was a broad gap in the number of regular average holidays among different regions in the nation. The dental hygienists who worked in Gangweon province enjoyed the longest holidays(10.88 days), while those on Jeju Island took the shortest vacation(4.46 days). Concerning monthly mean pay by place of employment, those who worked in public dental clinics were paid the best, and the dental hospital employees received the smallest pay. Their monthly mean pay significantly varied with the kind of their workplaces. As to connections between service area and pay level in the event of the dental hygienists with a four-year career, those who served in Seoul were paid the best(1,820,800 won), followed by Gyeonggi province(1,795,800 won), Gyeongsang province(1,604,200 won), metropolitan cities(1,424,800), Gangweon province(1,300,000 won) and Jeolla province(1,016,700 won). In regard to the starting pay in the different areas, the starting pay was largest in Seoul(1,501,800 won) and smallest in Jeolla province(904,000 won). Concerning work environments by place of employment, the dental hygienists in public dental clinics, general hospitals and university hospitals were far older than the others, and the career of the former was much larger than that of the latter. As to the number of regular leave of absence, public dental clinics, general hospitals and university hospitals were different from dental hospitals and clinics in that regard as well. Concerning monthly pay, public dental clinics paid their employees the best, and dental hospitals and clinics were ahead in terms of pay raise. But the reason seemed that public dental clinics and general hospitals increased the pay of their employees based on a fixed wage system and according to a fixed rate at the same time. As for relations between career and work environments, the pay of the dental hygienists differed with their career. The amount and rate of pay raise were largest for those whose career was between four years and less than six years, and smallest for those whose career was between seven years and less than nine years. The above-mentioned findings of the study suggested that in order to give dental hygienists better treatment, pay and welfare benefits should urgently be improved, and that it's required to take actions to boost their job satisfaction. Besides, they should be given more chances to receive education or to take training courses in pursuit of self-development, and how to narrow gaps in work environments among different regions or fields should carefully be considered.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.229-255
• /
• 2005

The Korea Development Bank promoted a total outsourcing for IT operation in 1999 for the first time in the banking industry. The Korea Development Bank became the center of public attention because the most banks were unwilling to take an outsourcing with external sources for the reason of financial operation accidents, securities, and threats of strikes. After the introduction of the total IT outsourcing, the Korea Development Bank has continuously diagnosed the problems of the IT outsourcing and adopted various proper complements for the enhancement of the IT outsourcing. As the result of the enhancement, the IT outsourcing of the Korea Development Bank marched into the joint liability operation period after going through the outsourcing operation period and the co-operation period. The joint liability operation which is the most leading outsourcing system which is adopted by the Korea Development Bank for the first time in the banking industry. Through the joint liability operation, the Korea Development Bank could accept the most up-to-date IT, concentrate internal manpower on the core capability, and secure flexibility of manpower. Also, the bank changed the relationship between the bank and the external sources from the one-sided relationship between a producers and a consumer to the joint liability relationship on which both sides are responsible for the operation, and could integrate the internal capacity with the professional know-how of the external IT outsourcing company. In this paper, we testified the soundness and validity for the worries of banks about the total IT outsourcing with external sources. And, we arranged the advantages and outcomes of the total IT outsourcing with external sources compared to the IT outsourcing with internal sources. Moreover, we expect that we can improve the closed financial IT outsourcing industry structure and raise the world competitive power of domestic IT outsourcing companies by correcting wrong ideas on the IT outsourcing with external sources.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.287-293
• /
• 2010

Purpose: This study evaluated the effect of polishing techniques on surface roughness of polymethyl methacrylate (PMMA), as well as the influence of light-cured surface glaze and subsequent brushing on surface roughness. Materials and methods: A total of 60 PMMA specimens ($10{\times}10{\times}5\;mm$) were made and then divided into 6 groups of 10 each according to the polymerization methods (under pressure or atmosphere) and the surface polishing methods (mechanical or chemical polishing) including 2 control groups. The mechanical polishing was performed with the carbide denture bur, rubber points and then pumice and lathe wheel. The chemical polishing was performed by applying a light-cured surface glaze ($Plaquit^{(R)}$; Dreve-Dentamid GmbH). Accura $2000^{(R)}$, a non-contact, non-destructive, optical 3-dimensional surface analysis system, was used to measure the surface roughness (Ra) and 3-dimensional images were acquired. The surface roughness was again measured after ultrasonic tooth brushing in order to evaluate the influence of brushing on the surface roughness. The statistical analysis was performed with Mann-Whitney test and t-test using a 95% level of confidence. Results: The chemically polished group showed a statistically lower mean surface roughness in comparison to the mechanically polished group (P = .0045) and the specimens polymerized under the atmospheric pressure presented a more significant difference (P = .0138). After brushing, all of the groups, except the mechanically polished group, presented rougher surfaces and showed no statistically significant differences between groups. Conclusion: Although the surface roughness increased after brushing, the chemical polishing technique presented an improved surface condition in comparison to the mechanical polishing technique.

• Journal of Nutrition and Health
• /
• v.36 no.9
• /
• pp.898-907
• /
• 2003

Antioxidative function of uncooked powdered food (Sangsik) was evaluated in rats consuming nutritionally unbalanced diet including 1％ cholesterol, high proportion of animal lipids (lard : soybean oil : 8 . 2) , sub-optimal levels of vitamin and mineral mixture along with 0.5% ethanol in drinking water. The uncooked powdered food tested in the present study was a mixture composed of 42 kinds of plant foods (cereals, legumes, seaweeds, vegetables, and fruits) supplemented with vitamins and minerals, and dietary fiber. Control rats were fed the semi-purified diet based on the AIN-93G composition, and nutritionally unbalanced rats were divided into 3 groups, and fed one of the following diets with 0.5% ethanol in drinking water for 5 weeks : unbalanced control diet (UC) ,20% Sangsik powder supplemented diet (S20), and 40% Sangsik powder supplemented diet (S40) . Food efficiency ratio was significantly higher in rats fed S40 compared to the value for rats fed UC (p < 0.05). Hepatic level of thiobarbituric acid reactive substances (TBARS) was significantly lower in rats fed UC compared to that for control rats (p < 0.05) , and was not influenced by dietary supplementation of the Sangsik powder. Hepatic superoxide dismutase (SOD) activity was significantly higher in rats fed UC compared to that for control rats (p < 0.05) , and significantly reduced in rats fed S20 or S40 compared to the value for unbalanced control rats. Feeding unbalanced control diet significantly reduced the ratio of hepatic GSH-Px ＋ catalase/SOD activities compared to the value for control rats, and this decrease in the ratio of antioxidant enzyme activities was reversed by adding the Sangsik powder to the diet at 20% (p <0.05) . Based on the results of antioxidant enzyme activities, feeding uncooked powdered diet appears to provide a favorable environment for body's antioxidative defense mechanism. Serum levels of Fe and Cu were significantly lower in rats fed the Sangsik powder supplemented diets compared to the value for unbalanced control rats (p < 0.05) , and levels of Se, Mn, and Zn were also tended to be decreased by dietary supplementation of the Sangsik powder. These results postulate the possibility that ingredients used in the uncooked powdered food may decrease the bioavailability of trace elements in rats.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.4 s.63
• /
• pp.857-874
• /
• 1998

The objective of this study is to collect the opinions on the present condition and the improvement directions of urban health centers from and to make a comparison. Samples were drawn from the various sources of a district in seoul. 53 persons involved in district health's administration(the Members of a District Parliament, the senior officials of a District office, village chief) and 84 health center workers were surveyed with anonymous postal questionaires and 427 district private medical personnels with postal questionaires and 625 users of a health center with direct questionaires, from November 18 to 25, 1996. Additionally, 12,151 households were surveyed with self-reported questionaires including priorities on special district health services of health center, from September 1 to 7, 1996. The major findings were as follows : 1) Although the persons involved in district health administration tend to put lower priority on health service over other community activities, they well acknowledged the importance of health center. But health center workers strongly acknowledged the importance of both health service and heath center. 2) As to the level of human resoureces, equipments and ammenities of Health Center commpared with private medical institute, the persons involved in district health's administration and health center workers responded that health center was higher in following order : 54.9%, 41.6%, 36.5% and 88.0%, 80.7%, 44.1%. 3) Concerning the priorities of health center's improvement, the persons involved in district health's administration replied in the order of reinforcement of proffesional health workers (43.3%), improvement of equipments and ammenities(28.3%), and the health center workers replied in the order of reconstruction of organization(24.1%), public health education and promotion(22.8%), reinforcement of proffesional health workers(21.0%). 4) Both the persons involved in district health's administration and health center workers replied that Ministry Health and Welfare, District office, health center were essential as the most critical organizations in the activation of Health Center's Function. 5) Persons involved in district health's administration and health center workers chose, as the most important health center's Function, medical treatment and prevention of infectious disease, and prevention of acute and chrone disease control and special district health service, respectively. Both Groups replied that fammily planning and parasite control are no longer in need. 6) As the future health service requiring reinforcement, every human resources parties considered health conselling, health line, sex education as the most imortant elements in public health education. Concerning the reinforement of other health services such as medical checkup and visiting nurses, every human resources parties showed more than 80% approval rate, but for oriental medical care service, the private medical personels showed relatively low approval rate(52.9%). Therefore the planning for reinforcement of health center's function requires the reflection of human resources party's opinion and the implication of system which can control and combine the differences in party's opinions.

• Journal of Animal Science and Technology
• /
• v.50 no.1
• /
• pp.33-44
• /
• 2008

The purpose of this study was to estimate the genetic parameters and trend of Landrace and Yorkshire pigs, which were raised on private farms from 1999 to 2005 and tested for their reproductive performance by the Korea Animal Improvement Association. Prior to analysis, records without pedigree or having value with larger than±3×standard deviation for the Total number of born were excluded. The effects of breed and environmental factors were estimated with least square method(Harvey, 1979), and estimation of breeding values and genetic parameters were performed on the data of 1’st litter only with GIBBSF90(Misztal, 2001) which was programmed according to Gibbs Sampling method based on Bayesian Inference by Gianola and Fernando(1986), Jensen(1994) and others. Gibbs sampling was performed 50,000 times for each parameter, and the first 5000 samples were regarded as those in burn-in period and thus, excluded for post hoc analysis. Total number of born and total number of accident were statistically significant(p<0.01) for the breed, farrowing year, farrowing season and parity effects, and the number born alive at birth was statistically significantp<(0.01) for the breed, farrowing year, farrowing season and parity effects. No particular trend was observed in the genetic and phenotypic improvement of the total number of born and number born alive at birth before 2001, when the piglet registration system started, but the tendencies of increasing for the total number of born and number born alive and decreasing for the total number of accident were observed since 2001. Somewhat higher heritability estimates of our study seems to be attributed to the situations that first parity records with poor farrowing performances were used in the analyses and it was impossible to obtain accurate reproductive performance due to the absence of criteria for record keeping at the level of individual farms.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.23-33
• /
• 2005

Agricultural sciences field in South Korea has many strong points such as numerous researchers, establishment of research infra-structure, excellence in research competitiveness and high technological level. However, there are also many weaknesses including insufficient leadership at related societies and institutes, deficiency of the next generation research group, and insufficiency in research productivity. There are many opportunities including increasing the importance of the biotechnological industry, activating international cooperation researches, and exploring the multitude of possible research areas to be studied. However, some threats still exist, such as pressure from the government of developed countries to open the agricultural market, the decrease of specialized farms, and intensification for researches to gratify economic and social demands. To encourage research activities in the agricultural sciences field in Korea, the following actions and systems are required: 1) formulation of a mid- and a long-term research master plan, 2) development of a database on the man power in related fields, 3) activation of top-down research topics, and associated increase of individual research grants, 4) development of special national programs for basic researches in agricultural sciences, 5) organization of a committee for policy and planning within the related societies, and 6) system development for the fair evaluation of the research results.

• Journal of Nutrition and Health
• /
• v.42 no.3
• /
• pp.213-220
• /
• 2009

Studies on the relationship between blood fatty acids and the risk of breast cancer have not yielded definite conclusions. The role of fatty acids in the development and progression of breast cancer is unclear. We conducted a case-control study to determine serum phospholipid fatty acid composition in benign breast tumor and breast cancer. Subjects consisted of 27 benign breast tumor and 68 breast cancer patients, and 28 matched controls. The levels of fatty acids were measured by gas chromatography. Higher arachidonic and palmitic acids were observed in breast cancer patients as compared with control and benign breast tumor patients. The percentage of total saturated fatty acids in breast cancer was higher than in control and benign breast tumor patients. The level of stearic acid was lower in benign breast tumor and breast cancer patients. Saturation index, the ratio of stearic to oleic acid, was lower in benign breast tumor and breast cancer patients compared to the control. Moreover, stearic acid was negatively and arachidonic acid was positively correlated with the cancer stage. In conclusion, our results support that serum phospholipid compositions of specific fatty acids are associated with the risk of benign breast tumor as well as breast cancer. Further studies are necessary to investigate mechanisms linked to the breast cancer etiology.