• Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.356-365
• /
• 2024

The study was conducted in the Terie River between January and April 2022. The objectives of the study were to assess the fish species composition, determine the length-weight relationship and condition factor and assess the water quality of the river using international water quality guideline for aquatic life. Gillnets with different mesh sizes, 4, 6, 8 and 10 cm were used to collect fish specimens in both dry and wet seasons. Immediately after capture, the total length (TL) and total weight (TW) of each individual were measured in centimeters and grams, respectively, and their relationship was determined using the power function. The physicochemical water quality parameters were analyzed using standard procedures and wagtech portable water quality Kits and Secchi Disk apparatus. A total of 667 fish specimens were collected from the Terie River, 410 and 257 in dry and wet seasons respectively. A total of six fish species, Oreochromis niloticus, Labeobarbus intermedius, Labeobarbus nedgia, Labeobarbus beso, Clarias gariepinus, and Ramius loti were recorded. For length-weight relationship and condition factor analysis, more abundant fish species (O. niloticus and L. intermedius) which were found in both seasons were selected. The length and weight relationship of L. intermedius were TW = 0.0073TL^3.04 in dry and TW = 0.0337TL^2.59 in we season indicated isometric and negative allometric growth respectively. While O. niloticus showed negative allometric growth, TW = 0.096TL^2.44 and TW = 0.0335 TL^2.76 in dry and wet seasons, respectively. The mean Fulton condition factor (FCF) of L. intermidus were 0.85 ± 0.03 and 0.94 ± 0.25 in dry and wet seasons, respectively. The FCF of O. niloticus was 1.70 ± 0.13 and 1.73 ± 0.12 in dry and wet seasons respectively. Except for ammonia, the physicochemical water quality parameters were with the permissible limit for aquatic life and are suitable for fishes Terie River. The river has commercially important fish specimens that could be used for food security and livelihood improvement. However, there is very limited fishing activity in the river due to less awareness on the value of fishes. Therefore, sustainable fishery development should be done in the river.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.31-48
• /
• 2004

Dental caries taking place with milk teeth affects eruption of permanent teeth adversely, and thus, it is very important to prevent dental caries from taking place with a child in maintaining his/her physical, mental and emotional health. In this study as conducted to obtain basic data to be required for development of a program for letting preschool children form a habitual life for oral health and right dietary life, a total 172 children aged 5 years and 6 years were selected from children who lived in Hwasung-si, Kyunggi-do and attended preschools (childrens houses) located there with the consent of their guardians. Then, the weight length index (WLI) and blood components of each child were analyzed, and each relation between the weight length index (WLI) and dental caries of milk teeth and between blood components and dental caries of milk teeth was comparatively examined, and thereby, the following results were obtained. When the dmf rate of each group according to the obesity was examined, it was found to be 87.50% in the under-weight group, 71.20% in the normal weight group and 83.87% in the overweight group. And when the dmft rate of each group was examined, it was found to be 48.43% in the under-weight group, 37.10% in the normal weight group and 47.17% in the overweight group. Also, when the dmft index of each group was examined, it was found to be 3.9 in the under-weight group, 3.0 in the normal weight group and 3.8 in the overweight group. That is to say, the under-weight group and the overweight group having an abnormal weight were found to be higher in all of the dmf rate, the dmft rate and the dmft index than the normal weight group. It could be, therefore, known that normal weight should be maintained in order to prevent dental caries of milk teeth. And, it is thought that a right dietary life habit ensuring intake of balanced nutrients should be formed for maintenance of a normal weight. As a result of examining the relation between nutrient components in blood and dental caries of milk teeth, in the case of children with no dental caries, inorganic nutrient components of blood had a tendency to be a little higher, but no statistical significance was observed therein. Meanwhile, it was found that there was a relation between blood type and the dmft index.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.2
• /
• pp.37-46
• /
• 2013

Purpose : The purpose of the research was to analyze foot pressure, foot temperature, and correlation between foot pressure and foot temperature to grasp impact on foot pressure and body temperature distribution chart depending on functional difference of leg length. Method : After measuring leg length, put 15 students whose functional difference of leg length was over 10mm to difference group and 15 students whose functional difference of leg length was under 5mm to normal group and categorize soles of foot into 6 sections of hallux head, 1st metatarsal head, 2-4 metatarsal head, 5 metatarsal head, lateral heel, and then measure by foot pressure analyzer to analyze characteristic of pressure distribution and classify into front of the lower leg, back of the lower leg, soles of foot and measure by body temperature analyzer to analyze by checking body temperature. Result : Weight difference depending on foot pressure and body temperature was bigger when functional difference of leg length was bigger, and it could be confirmed that foot pressure and body temperature of short leg side were higher than those of short leg side. Thus, if difference exists in leg length, weight load on short leg side increases which results in higher foot pressure and body temperature, therefore enabling an assumption that mechanical problem will occur in short leg. Conclusion : When functional leg length inequality, weight bearing and pressure was getting high as a result, temperature was getting high in short leg.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2006

Minimum weight design of laminated composite panel under combined loading was studied using linear and nonlinear deformation theories and by closed-form analysis and finite difference energy methods. Various buckling load factors are obatined for laminated composite panels with rectangular type longitudinal stiffeners and various longitudinal length to radius ratios, which are made from Carbon/Epoxy USNl25 prepreg and are simply-supported on four edges under combined loading, and then for them, minimum weight design analyses are carried out by the nonlinear search optimizer, ADS. This minimum weight design analyses are constructed with various process such as the simple design process, test simulation process and sensitivity analysis. Subseguently, the buckling mode shapes are obtained by buckling and minimum weight analyses.

• Journal of Life Science
• /
• v.15 no.1 s.68
• /
• pp.132-135
• /
• 2005

This experiment was performed to obtain the basic information on heterosis and heterobeltiosis of quantitative characters in the eggplant by crossing of varieties. The heterosis and heterobeltiosis were estimated in Fl generation. The results were as follows, based on the graphical analysis, the characters, plant height, stem diameter, fruit weight, leaf length, leaf width, and fruit number per plant(yield) were assumed to inherit dominance, and fruit length and fruit diameter were found to inherit incomplete dominance. The degree of positive heterosis of plant height, stem diameter, fruit weight, fruit length, fruit diameter, leaf length, leaf width, and fruit diameter, leaf width, leaf length, fruit weight, and stem diameter showed negative heterobeltiosis.

• Korean Journal of Ecology and Environment
• /
• v.57 no.2
• /
• pp.111-122
• /
• 2024

Zooplankton biomass is essential for understanding the quantitative structure of lake food webs and for the functional assessment of biotic interactions. In this study, we aimed to propose a biomass (dry weight) estimation method using the body length of cyclopoid copepods. These copepods play an important role as omnivores in lake zooplankton communities and contribute significantly to biomass. We validated several previously proposed estimation equations against direct measurements and compared the suitability of prosomal length versus total length of copepods to suggest a more appropriate estimation equation. After comparing the regression analysis results of various candidate equations with the actual values measured on a microbalance-using the coefficient of variation, mean absolute error, and coefficient of determination-it was determined that the Total Length-DW exponential regression equation [W=0.7775×e^2.0183L; W (㎍), L (mm)] could be used to calculate biomass with higher accuracy. However, considering practical issues such as the morphological similarity between species and genera of copepods and the limitations of classifying copepodid stages, we derived a general regression equation for the pooled copepod community rather than a species-specific regression equation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.11
• /
• pp.99-103
• /
• 1972

In order to clarify the relationship between the characters and the influence of each character on the yield of perilla, correlation coefficients and path coefficients were calculated. The results obtained are summarized as follows; 1. A highly significant positive correlation was found between stem length and stem diameter, number of pods per plant, stem weight, respectively. Number of internodes showed also significant positive correlation , with number of pods per plant, stem weight, respectively as well as the relationship between number of valid branches and number of pods per plant. On the other hand, a significant negative correlation was appeared between number of valid branches and l000-grain weight as well as the relationship between number of pods per plant and l000-grain weight. 2. It seemed to be clear that stem weight, number of pods per plant, l000-grain weight, number of valid branches and stem diameter have direct and positive influence on the yield of perilla. 3. Indirect influence was observed between stem length and stem weight, between number of valid branches and number of pods per plant, and between number of pods per plant and stem weight, respectively. 4. It may be concluded that the yield of perilla is positively correlated with stem length, number of valid branches, number of pods per plant, l000-grain weight and stem weight.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1515-1520
• /
• 2012

Insulin-like growth factor binding protein-3 (IGFBP-3) gene is important for regulation of growth and development in mammals. The present investigation was carried out to study DNA polymorphism by PCR-RFLP of IGFBP-3 gene and its effect on fibre traits of Chinese Inner Mongolian cashmere goats. The fibre traits data investigated were cashmere fibre diameter, combed cashmere weight, cashmere fibre length and guard hair length. Four hundred and forty-four animals were used to detect polymorphisms in the hircine IGFBP-3 gene. A 316-bp fragment of the IGFBP-3 gene in exon 2 was amplified and digested with HaeIII restriction enzyme. Three patterns of restriction fragments were observed in the populations. The frequency of AA, AB and BB genotypes was 0.58, 0.33 and 0.09 respectively. The allelic frequency of the A and B allele was 0.75 and 0.25 respectively. Nucleotide sequencing revealed a C>G transition in the exon 2 region of the IGFBP-3 gene resulting in R158G change which caused the polymorphism. Least squares analysis revealed a significant effect of genotypes on cashmere weight (p<0.0001), cashmere fibre length (p<0.001) and hair length (p<0.05) of the animals. The effect of genotypes on cashmere fibre diameter was not statistically significant (p>0.05). The animals of AB and BB genotypes showed higher cashmere weight, cashmere fibre length and hair length than the animals possessing AA genotype. These results suggested that polymorphisms in the hircine IGFBP-3 gene might be a potential molecular marker for cashmere weight in cashmere goats.

• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.305-312
• /
• 2021

Background: Butterflies make an important part for plant-pollinator guild. These are nectar feeder or occasionally pollen feeder and thus proboscis of the butterfly species are considered as one of the most important variable in relation to the collection of food from plants. In butterfly-plant association, nectar source is principally determined by quality of nectar, corolla length, and nectar quantity. For the butterfly, nectar uptake is determined by proboscis length because flowers with long corolla restrict butterfly species containing shorter proboscis. Empirical studies proved that butterfly species with high wing loading visit clustered flowers and species with low wing loading confined their visit to solitary or less nectar rich flowers. The present study tries to investigate the flower preference of butterfly species from Lycaenidae family having very short proboscis, lower body length, lower body weight and wing span than the most species belonging from Nymphalidae, Pieridae, Papilionidae, and Hesperiidae. Results: Butterflies with shorter proboscis cannot access nectar from deeper flower. Although they mainly visit on less deeper flower to sucking nectar, butterflies with high wing loading visits clustered flowers to fulfill their energy requirements. In this study, we demonstrated flower choice of seven butterfly species belonging to Lycanidiae family. The proboscis length maintains a positive relationship with body length and body weight. Body length maintains a positive relationship with body weight and wing span. Wing span indicate a strong positive relationship with body weight. This study proved that these seven butterfly species namely Castalius rosimon (CRN), Taracus nara (TNA), Zizinia otis (ZOT), Zizula hylax (ZHY), Jamides celeno (JCE), Chilades laius (CLA), and Psuedozizeeria maha (PMA) visit frequently in Tridax procumbens (TPR), Ocimum americanum (OAM) and Syndrella nodiflora (SNO). The species do not visit Lantana camara (LCA) and Catharanthus roseus (CRO) plants. Conclusion: The present study proved that butterfly species visits frequently in Tridax procumbens (TPR), Ocimum americanum (OAM) but less frequently in Syndrella nodiflora (SNO). So, that study determined the butterfly species helps in pollination of these herbs that in turn helps the conservation of these butterfly species.

• Journal of the East Asian Society of Dietary Life
• /
• v.4 no.1
• /
• pp.1-18
• /
• 1994

This study is designed to delve into the measuring systems of different periods so as to help with more exact representations of cultures of different periods. The basis of the measuring system in china stems from the huangjong (Huangzhong : the yellow bell) of the period of Huangdi, the length of the bell being the width of 90 black millet grains. Do (Du : width) ; 1 bun=the width of one black millet grain, 1 Chon=10 Buns, 1 Chuk=10 Chons, 1 Jang=10 Cheoks, 1 In=10 Jangs. Ryang (Lyang : volume) ; 1 Yak=the weight of 1,200 grains in the yellow bell, 1 Hab=2 Yaks, 1Seung=10 habs, 1 Du=10 Seungs, 1 Gok=10 Dus. Hyung (Hung : weight) ; 12 Jus=the weight of 1 Yak, 1Yang=24 Jus are equal 1 Hab in weight, 1 Geun=16 Ryangs, 1 Jo=30 Geuns, 1 Seo=4 Jo. In the era of Eun (In) it was decided that the 9-chon length of the Yellowbell shall be 1 Cheok. The Cheok of Ju was set at 4/5 of the length of the yellow bell. The Cheok of Ju breaks into Yongjocheok, Joryegicheok, Pogeumcheok. Yongjocheok, arising from Rohbancheok of the Ju period, is part of Gokcheok also used as a measuring tool for wooden works. The Han cheok has the same length as the yellow bell. The Sang Cheok is 4/5 of the length of the yellow bell. The Tang Cheok was originally the same as the Sang cheok but became longer and longer to be the Long cheok (31.3cm). The length-measuring system used in the three-nation era of Korea includes the gijeom cheil (35.52cm), Ju cheok (25.45cm), sunje Cheok (23.5cm), the Long Tang Cehok (29.706 cm), making 10 Bun 1 Chon and 10 Chon 1 Cheok. The volume-measuring system(Seung) was 198.81 ㎤ before 681 BC in the shilla Dynasty and was 596.42 ㎤ after that. In the seventh year of Kng Munjong of the Koryo dynasty the standard measuring system with the Long Tang Cheok as its basis was adopted, and the standard volume-measuring tools were used under the name of Migok, Daesodugok, Mijangdu, (29.706 cm), making 10 Bun 1 Chon and 10 Chon 1 Cheok. The volume-measuring system(Seung) was 198.81㎤ before 681 BC in the shilla dynasty and was 596.42 ㎤ after that. In the seventh year of King Munjong of the Koryo dynasty the standard measuring system with the Long Tang Cheok as its basis was adopted, and the standard volume-measuring tools were used under the name of Migok, Daesodugok, Kijangdu, Habseung and gokseok. The 1 Seung volumes of theses toolas were 596,447,927 and 1053㎤, respectively. were called Migok, Daesodugok, Mijangdu, Habseung and Gokseok, being respectively 596,447,927, 1053 ㎤, respectively. In the Chosun Dynasty the length of the Yeongjocheos was 27.6 cm or 31.220 in the Sejong era, 29.8 from Heonjong through Gojong, and 30.3 cm after the 6th year of King Kwangmu, and the volume of Du(Mal) also changed like 4.121 or 5.964, 5.187, 23.08 $\ell$, and the 1-Jeonjung also changed like 2.66 or bout 4, 3.45, 3.75 in line with the changes of the length system.