• Journal of Korean Society of Rural Planning
• /
• v.18 no.1
• /
• pp.17-28
• /
• 2012

Functional mismatch and thought and plan-less material use of recently built boundary barriers in rural areas should greatly degrade their amenity value as one of linear villagescapes, but, their present state-of-art basically necessary for problem-solving had never surveyed up to now. From this point of view, this study tried to investigate present stock quantities and qualities of boundary barriers in rural areas by sample studies on 21 case villages(7 types ${\times}$ 3 cases) and comparative analysis between the planned or improved and nots. Wall type was absolutely dominated in the structural terms, of which more than half was used cement block as building material and, therefore, grey-colored. More than half of total barrier length were fully shielded, while relatively partially shielded in the mountainous villages in open space and 'Cultural villages' with closed housing structures. Free standing style of barriers was shown along over two thirds of their total length, although not more than half in planned reclaimed villages. Especially, because of one-sided wall type structure, mismatched over-shieldness and poorer maintenance condition of the boundary barriers in peri-urban villages, there should be provided with very intensive improvement efforts for amenity barriers.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.230-235
• /
• 2000

The extrusion process for long-length multi-filaments of BSCCO 2223 superconductor tape has been investigated with aids of Finite Element Method and experimental inspection. Since the arrangement of filaments in matrix material has characteristic of rotational symmetry, a 2-dimensional commercial FEM package, DEFORM-2D, was adopted to simulate extrusion process with different variables such as hardness of sheath material, lengths of each filament and arrangement. From the FEM analysis, since the inner filaments move faster than the outer one, distribution of filaments is needed to be optimized. In the case of pure Ag matrix, undesirable non-uniform distribution of filament was obtained due to low hardness of sheath material. Dummy sample(brass (sheath) and talc powder(filament)), however, which has relatively high hardness of sheath material, had been produced with desirable results. Therefore, it is necessary to optimize hardness of sheath material, extrusion temperature and billet design.

• Health Policy and Management
• /
• v.25 no.1
• /
• pp.31-39
• /
• 2015

Background: The purpose of this study is comparison of the results between regression and multi-level analysis to find out factors influencing outcome indicators (in-hospital death, length of stay, and medical charges) of stroke patients. Methods: By using patient sample data of Health Insurance Review & Assessment Service, patients admitted with stroke were selected as survey target and 15,864 patients and 762 hospitals were surveyed. Results: For the results of existing regression analysis and multi-level analysis, models were assessed through model suitability index value and as a result, the value of results of multi-level analysis decreased compared to the results of regression, showing it is a better model. Conclusion: Factors influencing in-hospital death of stroke patients were analyzed and as a result, intra-class correlation (ICC) was 13.6%. In factors influencing length of stay, ICC was 11.4%, and medical charges, ICC was 17.7%. It was found that factors influencing the outcome indicators of stroke patients may vary in every hospital. This study could carry out more accurate analysis than existing research findings through analysis of reflecting structure at patient level and hospital level factors and analysis on random effect.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.3
• /
• pp.161-163
• /
• 2002

Apoptosis has been hypothesized to be involved in the pathogenesis in schizophrenia. A large number of genes are known to mediate the apoptotic process; Apo-1/Fas (CD95) is a well-known example of such genes. In the present study, MvaI restriction fragment length polymorphism, a polymorphic marker present within the Apo-1/Fas gene, was examined in a population consisting of 226 control subjects and 110 schizophrenia patients, all of them Korean in ethnicity. No statistically significant difference in the genotypic distribution and allelic frequencies was observed between the control and the schizophrenia patient group. To find out the precise effect of Apo-1/Fas gene polymorphisms on the susceptibility to schizophrenia, further studies are warranted to investigate possible involvement of other polymorphisms with a larger sample population.

• BMB Reports
• /
• v.39 no.5
• /
• pp.607-617
• /
• 2006

A novel calcium-dependent protein kinase gene (designated as IiCPK2) was cloned from tetraploid Isatis indigotica. The full-length cDNA of IiCPK2 was 2585 bp long with an open reading frame (ORF) of 1878 bp encoding a polypeptide of 625 amino acid residues. The predicted IiCPK2 polypeptide included three domains: a kinase domain, a junction domain (or autoinhibitory region), and a C-terminal calmodulin-like domain (or calcium-binding domain), which presented a typical structure of plant CDPKs. Further analysis of IiCPK2 genomic DNA revealed that it contained 7 exons, 6 introns and the length of most exons was highly conserved. Semi-quantitative RT-PCR revealed that the expression of IiCPK2 in root, stem and leaf were much higher in tetraploid sample than that in diploid progenitor. Further expression analysis revealed that gibberellin ($GA_3$), NaCl and cold treatments could up-regulate the IiCPK2 transcription. All our findings suggest that IiCPK2 might participate in the cold, high salinity and GA3 responsive pathways.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.1-6
• /
• 1996

To simulate the characteristics of magnetic exchange coupling at the interface of MR/TbCo thin films, the directions of magnetizations were calculated by minimizing energy in the films. Newton method and Gauss-Seidel method were used. The width of M-H curve increased with TbCo anisotropy constant, and with the thickness of the transition region of TbCo layer. Hysteresis loop width became extremely narrow (less than 10 Oe of coercivity), when the TbCo transition region length was $400\;\AA$. Also the hysteresis loop of films with low interfacial exchange coupling constant was similiar to that of short transition region length. When interfacial exchange coupling constant was 1/100 of perfect coupling, hysteresis loop showed a coercivity of less than 10 Oe. Comparing the measured hysteresis loop of a fabricated sample with that of simulated one, exchange coupling con¬stant could be estimated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.211-220
• /
• 1994

The purpose of this study was to analyze the foot type by cluster analysis for footwear. The sample size for the study was 200 college womens between age 19 and 23 in Pusan urban area. There were measured 17 items of the foot for factor analysis and cluster analysis. The result was as follows : 1. 1'here were 9 items selected by factor analysis. 2.'rho cluster analysis of the foot must be analyzed by direct and indirect measurement indivisually. 3. The cluster analysis of the direct measurement ; Cluster 1 : 1'he foot length is all much the same to mean value of this age group and the items of width and circumference are relatively small to other clusters. Cluster 2 ; The foot length is relatively small to other clusters and the items of width and circumference are all much the same to mean value of this age group. Cluster 3 ; The foot sine Is relatively large to other clusters. 4. The cluster analysis of indirect measurement ; Cluster 1 ; The (cot print angle is high find Metatarso-Phalanx angle is transformed Cluster 2 ; The foot print angle is low and Melatarso-Phalanx angle is normal. Cluster 3 : Tho foot print angle Is middle and Metatarso-Phalanx angle is all the mush same to mean value of this age group. Cluster 4 . The foot print angle Is the most value and Metatarso-Phalanx angle is normal.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.64-70
• /
• 2006

The purpose of this study is to investigate the somatotype variation & satisfaction with the fit of ready-to-wear for overweight women. For this study, questionnaires were administered to 154 overweight women in Andong & Daegu areas. Employing a sample of 116 data were analyzed by using F-test. And 10 overweight women's brands were analyzed for sizing system of women's ready-to-wear. The results were as follows: In the satisfaction with the somatotype variation of overweight women, length items increased and girth items decreased with aging. At neck, bust, waist, hip and sleeve circumferences, satisfaction with the fit of ready-to-wear decreased with aging. Correlation for somatotype variation & satisfaction with the fit of ready-to-wear was significantly positive. And main sizing system of overweight women' s ready-to-wear brands was size 99 & 105 cm(bust)-90 cm (waist)-110 cm(hip), and its sizing intervals was almost existed in range of 5 cm-7 cm. There were various sizing systems in overweight women's ready-to-wear brands, and it raised a problem of consumer's dissatisfaction.

• Journal of Forest and Environmental Science
• /
• v.40 no.1
• /
• pp.35-42
• /
• 2024

The Japanese larch (Larix kaempferi [Lamb.] Carriere) is a major timber species in Korea. However, studies on bucking rates and merchantable logs of this species are insufficient in South Korea. To bridge these gaps, in this study, the bucking rate of Japanese larch (Larix kaempferi [Lamb.] Carriere) was computed and the number of long logs and merchantable log volumes were analyzed. Sample trees were bucked according to the log grade for trading, and collected from a forest field in Gangwon Province. The bucking rate of all Japanese larch logs was >89%. The highly profitable 2-4 logs of 3.6 m length from trees with ≤30 cm diameter at breast height (DBH) and 5-6 logs with ≥34 cm DBH were produced. The bucking rate of long logs was >84%; thus, Japanese larch was found to be suitable for the supply of high-grade timber. Additionally, to follow reasonable wood supply plans, merchantable volume tables were offered based on 3.6 m-long number of logs and small-end diameter classes. Understanding the proportion of merchantable log volumes, bucking rates, and the number of long and short logs has large-scale applications in practical forestry.

• Journal of Korean Society for Quality Management
• /
• v.40 no.2
• /
• pp.186-198
• /
• 2012

Since Duncan(1956) first proposed an economic design of $\bar{X}$-control charts, most of the succeeding works on economic design of control charts assumed the exponential failure model like Duncan. Hu(1984), however, assumed a more versatile Weibull failure model to develop an economic design of $\bar{X}$-control charts and Banerjee and Rahim(1988) further improved Hu's design by changing the assumption of fixed-length sampling intervals to variable-length ones. In this article we follow the approach of Banerjee and Rahim(1988) but include a pair of warning limits inside the control limits in order to search for a failure without stopping the process when the sample mean falls between warning and control limits. The computational results indicate that the proposed model gives a lower cost than Banerjee and Rahim's model unless the early failure probability of a Weibull distribution is relatively large. The reduction in cost is shown to become larger as the cost of production loss outweighs the cost of searches for a failure.