• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.825-832
• /
• 1995

The effect of loading variables and temperature on fatigue crack growth rate in SA508 Cl.3 nuclear pressure vessel steel was investigated in air environment Crack growth rate tests on compact tension specimen of thickness 12mm were conducted by using sinusoidal waveform. The crack length was monitored by compliance method. Test conditions were at 0.1 and 0.5 of load ratio, at 1 and 10 Hz of loading frequency, and at room temperature to 40$0^{\circ}C$. At the lower temperatures, the fatigue crack propagation was not affected by the frequency and temperature, while at the higher temperatures above 12$0^{\circ}C$, fatigue crack growth rate increased with decreasing loading frequency and increasing temperature. This accelerated fatigue crack propagation was associated with the increase of oxidation rate at the ahead of crack tip. Fatigue crack growth rate increased with in-creasing the load ratio. The effect of load ratio was more significant at the lower temperature, while the dependence on load ratio decreased with increasing temperature. The sensitivity of load ratio to temperature can be explained by crack closure with the oxidation process.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.4
• /
• pp.257-262
• /
• 2015

In this paper, the split-ring DGS resonator is proposed and its equivalent circuit are analyzed to design the low pass filter. Compared with the conventional dumbell DGS cell, this structure has a flat fluctuation in low frequency range and a sharp slop at edge frequency. The out-band suppression of the SRR-DGS cell can be improved by placing the open stubs on the conductor line which operates as parallel capacitances. Making use of equivalent circuit analytical method, the characteristics of the improved SRR DGS cell are investigated and applied to design compact low pass filter, which has a low in-band loss, sharp slop and high suppression of more than 35dB within a wide out-band frequency range. The dependence of the transmission characteristic on the dimension of a split ring, such as side-length and split-gap, is analyzed in detail. In addition, an improved SRR DGS cell model with open stubs loaded on the conductor line is then presented to improve the out-band suppression. By using the equivalent-circuit analytical method, an S-band microstrip low-pass filter with perfect low-pass characteristic and high out-band suppression is designed and fabricated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.409-416
• /
• 2017

In order that multiple wideband RF transmitters which have mission to deliver essential information to aircraft operate at the same time, RF transmitter has a variable sub-carrier frequency to modulate the signal. In case of exposure to weak environment, Wide-band RF transmitter is designed to check component of transmitter that includes antenna BIT to increase system reliability. Normally, Antenna BIT measure the reflection RF power of antenna to check system condition. However, Antenna BIT has a difference that depends on testing frequency to use the long RF cable which is located between the power amp and the antenna. The periodic phenomenon of the reflected antenna power are theoretically explained about dependence on the RF cable length. Based on presented result, suggested measurement methods is effectively able to be applied to diagnosis system condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.576-576
• /
• 2013

Recently, diagnostics of plasma becomes more important due to requirement of precise control of plasma processing based on measurement of plasma characteristics. The Langmuir probe has been used for the diagnostics but it has an inevitable uncertainty and error sources such as incorrect tip length and RF noise. Instead of the Langmuir probe, various diagnostic methods have been developed and researched. The cutoff probe is promising one for plasma density using microwaves and resonance phenomenon at the plasma frequency. The cutoff probe has various advantages as follows; (i) it is simple and robust, (ii) it uses few assumptions, and (iii) it is free from deposition by reactive gas. However, the cutoff probe also has uncertainty and error sources such as gap between tips, tip length, direction of tip plane, and RF noise. In this study, the uncertainty and error sources in manufacturing both probes and in diagnostics process were analyzed via comparative experiment at various discharge conditions. Furthermore, to reveal the user dependence of both probes, three well trained Ph. D students made the Langmuir probe and the cutoff probe, respectively, and it were analyzed. Thought this study, it is established that reliability and validity of the Langmuir probe and the cutoff probe related with not only the intrinsic characteristics of probes but also probe user.

• Korean Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.45-51
• /
• 1993

The purpose of this study is to provide some information for the proper education on clothing wearing habits so that the education may be performed in the direction of social needs according to the social change and in the direction of the needs and interest of the high school girl students in their adolescence by being conscious of the influence of clothing on the high school girl students. I have used questionaire as an instrument of measurement. The length of the time of survey is from February 11, 1991 to February 28. The subjects are 544 first grade girl students of general high schools in Cheong-Ju, Choong-Ju, and Je-Cheon. The analysis of the data includes frequency, percentage, average person's Correlation Program, t-test, ANOVA, Scheffe's test. The conclusion of this study is as follows: The first, it is shown that (l)students's interest in the design and fashion of clothing is significantly related to the socio-anthropological and socio-psychological factors such and the education level of their fathers, the education level of their mothers, monthly income of their homes, the clothing habits of their home economics teachers, the subjects which they are interested in, their average scholoary achievements, their religious background, and whether they have boy friends or not, etd. (2)students' interest in purchasing of clothing is significantly related to the socio-anthropological and socio-psychological factors such as the education level of their fathers, the education level of their mothers, monthly income of their homes, the clothing habits of their home economics teachers, the subjects which they are interested in, their average scholoary achievements, and whether they have boy friends or not, etc. (3)students' interest in the social-psyclological aspect is significantly related to the socio-anthropological and socio-psychological factors such as their living area, the clothing habits of their home economics teachers, etc. (4)students' interest in the clothing construction is significantly related to only the clothing habits of their home economics teachersl. (5)students' interest in the clothing management is significantly related to the socio-anthropological and socio-psychological factors such as the education level of their parents, the age of their mothers, their religious background, and their sisters. The second, as for the interest of the high school girl students in clothing, it has been shown that those who wear school uniforms tend to have more interest than those who wear free-choice clothes in such areas as shopping, the construction, and management. As for the other two areas, that is, disign and fashion, and the interest in socio-psychological dependence there has been little meaningful difference between the two groups, while the uniform group has shown more interest than the other group. The third, the interest of hish school students in clothing is considered to be most seriously influenced by their socio-psychological dependence out of five areas of interest. It has been shown that the proportion of the content dealing with clothing wearing life in the high school home economics texbooks in relatively small, especially in such areas as socio-psychological dependence, shopping, management, and design and fashion except in construcion.

• Journal of the Korean earth science society
• /
• v.30 no.1
• /
• pp.69-80
• /
• 2009

We investigate the dependence of star formation rate and Active Galaxy Nuclei (AGN) frequency on the bar properties, especially the bar strength, using SDSS DR6. To better represent the bar strength, we divided the bars into 6 classes according to their length and axial ratios. There seems to be a fairly good correlation between the star formation rate derived from $H{\alpha}$ emission lines and the bar strength, whereas there is no apparent correlation between the AGN activity and the bar strength. We interpret that the former correlation is due to the dependence of bar-driven gas inflow on the strength of bar. The lack of correlation between AGN and bar properties suggests that the accretion of gas onto a supermassive black hole (SMBH) is regulated by the interplay between the bar and SMBH. The frequency of AGN seems to be dependent on the background density but the star formation rate does not. It suggests that star formation is a localized phenomenon that is mostly determined by the gas density in a galaxy, while AGN activity is more closely related to the host property such as mass and luminosity that are thought to be dependent on the environment through the density-luminosity relation.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.553-560
• /
• 2004

In this experiment, a three dimensional structure analysis was carried out to examine the surface defects of semiconductor made artificially on known scale. It was investigated the three dimensional imaging according to the sample depth and the thermal diffusivity as well as the carrier transport properties. The thermal diffusivity measurement of the intrinsic GaAs semiconductor was also analyzed by the difference of frequency-dependence photoacoustic signals from the sample surface of different conditions. Thermal properties such as thermal diffusion length or thermal diffusivity of the Si wafer with and without defects on the surface were obtained by interpreting the frequency dependence of the PA signals. As a result, the photoacoustic signal is found to have the dependency on the shape and depth of the defects so that their structure of the defects can be analyzed. This method demonstrates the possibility of the application to the detection of the defects, cracks, and shortage of circuits on surface or sub-surface of the semiconductors and ceramic materials as a nondestructive testing(NDT) and a nondestructive evaluation(NDE) technique.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.97-102
• /
• 2000

Subband coding is to divide the signal frequency band into a set of uncorrelated frequency bands by filtering and then to encode each of these subbands using a bit allocation rationale matched to the signal energy in that subband. The actual coding of the subband signal can be done using waveform encoding techniques such as PCM, DPCM and vector quantizer(VQ) in order to obtain higher data compression. Most researchers have focused on the error in the quantizer, but not on the overall reconstruction error and its dependence on the filter bank. This paper provides a thorough analysis of subband codecs and further development of optimum filter bank design using vector quantizer. We compute the mean squared reconstruction error(MSE) which depends on N the number of entries in each code book, k the length of each code word, and on the filter bank coefficients. We form this MSE measure in terms of the equivalent quantization model and find the optimum FIR filter coefficients for each channel in the M-band structure for a given bit rate, given filter length, and given input signal correlation model. Specific design examples are worked out for 4-tap filter in 2-band paraunitary filter bank structure. These optimum paraunitary filter coefficients are obtained by using Monte Carlo simulation. We expect that the results of this work could be contributed to study on the optimum design of subband codecs using vector quantizer.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.147-153
• /
• 2016

The lightning protection of information and communication facilities is very important factor to improve a reliability of the action of these equipment. Especially the transient potential rise of ground electrode being injected with the lightning current is to be a basic data of the dielectric strength for both power and communication facilities so that more accurate analysis should be required. The transient potential rise can be calculated from the ground impedance and the ground impedance is strongly dependent upon the shape of the ground electrode and the frequency-dependence of soil. The Debye's equation which is able to calculate the characteristics of dielectrics is used to analyze the frequency-dependent of soil. Also, the method to calculate the transient potential rise from the ground impedance is specified in this paper. In order to analyze the transient potential rise resulting from calculations with Debye's equation, TLM(transmission line method) and case of ${\rho}$(resistivity)-constant are simulated, respectively. The length of a horizontal ground electrode is 30 m and simulations were performed at 10, 100, $1000{\Omega}{\cdot}m$ with the standard lightning current waveform. In result, the transient potential rise of horizontal ground electrode calculating with Debye's equation is lower than it of other models.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.55-59
• /
• 2007

Co-based amorphous magnetic wire with a diameter of $125{\mu}m$ and a length of 40 mm was used as an inner conductor of a coaxial cable to construct a magnetic sensor. Sensor characteristics was measured up to 3 GHz with applied up to 60 Oe by using network analyzer. Frequency dependence of impedance for this sensor was very close to the impedance resonant pattern of transmission line and 250 MHz was obtained as a 1/4 wavelength without external magnetic field. Large impedance change was measured in the magnetic field range between 0 Oe and 1 Oe, which was influenced by permeability change of magnetic amorphous wire. Because ${\Delta}Z/{\Delta}H$ value of $300{\Omega}/Oe$ was obtained at 0.1 Oe, this coaxial cable with amorphous wire can be useful as a magnetic sensor.