• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.195-198
• /
• 2003

The accuracy of automatic speech recognition system depends on the presence of background noise and speaker variability such as sex, intonation of speech, and speaking rate. Specially, the speaking rate of both inter-speaker and intra-speaker is a serious cause of mis-recognition. In this paper, we propose the compensation method of the speaking rate by the ratio of each vowel's length in a phrase. First the number of feature vectors in a phrase is estimated by the information of speaking rate. Second, the estimated number of feature vectors is assigned to each syllable of the phrase according to the ratio of its vowel length. Finally, the process of feature vector extraction is operated by the number that assigned to each syllable in the phrase. As a result the accuracy of automatic speech recognition was improved using the proposed compensation method of the speaking rate.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.317-322
• /
• 2018

We use edge detection technique for the input image to extract the entire edges of the object in the image and then select only the edges that construct the outline of the object. By examining the positional relation between these pixels composing the outline, a simplified version of the outline of the object in the input image is generated by removing unnecessary pixels while maintaining the condition of connection of the outline. For each pixel constituting the outline, its direction is calculated by examining the positional relation with the next pixel. Then, we group the consecutive pixels with same direction into one and then change them to a line segment instead of a point. Among those line segments composing the outline of the object, a line segment whose length is smaller than a predefined minimum length of acceptable line segment is removed by merging it into one of the adjacent line segments. As a result, an outline composed of line segments of over a certain length is obtained through this process.

• The Journal of the Korean dental association
• /
• v.10 no.3
• /
• pp.155-158
• /
• 1972

As a factor of dentistry, the form of the tooth especially the size plays an important part. And in orthodontics the relation between the tooth size, arch length and the basal arch is regarded important, and it is closely related to the extraction and retension probolem in treatment planning. The auther's study of the mesio-distal crown diameters of permanent teeth, width and length of the dental arch and basal arch from the cast of 50 men and 53 women who could be measured clerly, among 102 men and 107 women regarded as the normal occlusion showed the followings. 1. Table 1 and table 2 showed the measurement of the mesio-distal maximum width of the permanent teeth, width and length of the dental arch and basal arch of the upper and lower dentitions. 2. Men's mesio-distal width of the teeth, arch length and arch width of the upper and the lower dentition, basal arch width and basal arch length are larger than those of wonen's 3. We compared the Koreans with the American white. Upper central incisors, upper first molars and lower second premolars of the latter were larger than those of the former. And the Koreans's rest tooth of the rest were comparatively larger.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.841-847
• /
• 2011

Testosterone acts to protect the heart as a male hormone. If it is secreted suitably, health, but too less it will have an bad influence in organs of the body. In particular, when normal levels of testosterone secretion is less, arteriosclerosis will be increased risk of heart diseases. According to the amount of testosterone is influenced difference in the ring finger length of male. Therefore, we organize groups of subjects in heart diseases and normal who measure these groups' length of the ring finger and index finger. With this in mind, we carried out analysis of interrelationship in length of the ring finger and heart diseases through cross-comparison analysis in this paper.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.1-11
• /
• 2004

Predicting the arch length discrepancy by simply comparing the available arch perimeter with tooth materials is merely a 2-dimensional analysis of the teeth movement. However, the real teeth movement takes place 3-dimensionally and is affected by various factors such as, the arch fen the curve of Spee and the axis of the incisors. The purpose of this study is to clarify the relationship between the decrease in the arch perimeter and the horizontal positional change of the incisors after extraction of the 1st bicuspids, for more analytic evaluation of the arch length discrepancy at pre-treatment model analysis stage. In addition to that to evaluate the effect of the curve of Spee, teeth axis to the basal plane, and the incisional crowding to the treatment outcome. All patients were treated at the department of orthodontics, dental hospital, Yonsei university. Inclusion criteria for patients selection were as follows. $\cdot$ Angle classification I malocclusion with bialveolar protrusion $\cdot$ Extraction of 4 1st bicuspids $\cdot$ No tooth anomaly or prosthesis $\cdot$ No abnormal attrition $\cdot$ No ectopically erupted teeth $\cdot$ Angle classification I canine and molar relationship $\cdot$ Less than 3mm of crowding Model analysis of the above patients was performed and the following conclusions were obtained. 1. When the intercanine distance was maintained, the available space for the distal movement of the mandibular incisors after the extraction of the 4 1st bicuspids was larger than the space provided by the extraction of the 4 1st bicuspids. However the difference was less than 1mm. The more tapered the anterior arch form, the larger the difference. 2. Compared to the situation in which the intercanine distance was maintained, when the intercanine distance was expanded to meet the width of the Posterior teeth, the incisors could move about 3mm more distally. 3. The positional difference of the incisal tip was insignificant whether the central incisors were moved by tipping or bodily movement. 4. When the anterior crowding was solved without changing the intercanine distance, the larger the anterior arch length was, the more the anterior movement of the incisors. 5. When the curve of Spee was levelled, the increase in the arch perimeter was less than half of the deepest curve of Spee.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.268-277
• /
• 2008

Authors evaluated 1171 patients at the department of Pediatric Dentistry in Kyoungpook National University Hospital through clinical records and radiographs. And the following features were studied ; age, sex distribution, number of mesiodens per patients, cause of discovery of mesiodens, location, status of eruption, shape and orientation of crown, complication, dental age of adjacent upper incisor tooth at the time of surgical extraction of mesiodens and the relationship between the resolution rate of complication after extraction of mesiodens and the dental age of adjacent upper incisor tooth, length of diastema, the eruption status of lateral incisor and the crowding status of premaxilla. The followings are the results : 1. The cause of discovery of mesiodens were as follows ; delayed eruption of the permanent incisors in 13.8%, midline diastema in 11.6%, radiographs taken for other reasons in 23.4% and for caries treatment in 15.1%. 2. Complication due to the presence of mesiodens did not occur in 36.8%, delayed eruption of adjacent teeth was observed in 16.1%, midline diastema in 34.4%, rotation in 8.8%, displacement in 2.4%, and crowding in 1.0% of all evaluated patients. 3. As for the dental age of adjacent upper incisor tooth at the time of surgical extraction of mesiodens, below 1/3 of total root length were observed in 3.5%, $1/3{\sim}1/2$ of total root length in 19.9%, $1/2{\sim}2/3$ of total root length in 54.7% and over 2/3 in 21.9% of all evaluated patients. 4. Resolution rate of delayed eruption after the extraction of mesiodens was significant higher in the group with the root length below 1/2. Resolution rate of midline diastema was significant higher in the group with diastema width below 3mm and with non-crowding of adjacent upper incisor teeth.

• Journal of Oral Medicine and Pain
• /
• v.26 no.2
• /
• pp.147-156
• /
• 2001

The purpose of this study was to identify the difference of vertical movement of mandible according to Angle's molar relationship and by skeletal factors affect to vertical movement of mandible. 172(age ranged from 20 to 30) subjects who go to college within territory of Kwangju city without any experience of temporomandibular disorder, extraction and orthodontic treatment. were selected for this study. The subjects were classified into class I(male:30, female:49), class II(male:18, female:24) and class III(male:18, female:33) according to Angle's molar relationship. The distance was measured between incisal edge of maxillary and mandibular central incisor and between bottom of central fossa of maxillary and mandibular 1st molar with ruler. The arch length and width were measured on the diagnostic cast. Cephalometrics were taken and then traced. Landmarks were identified and analyzed. 1. Maximal interincisal opening of male is larger than that of female in class I, class II and class III. Among each group maximal interincisal distance is the largest in class III. Maximal intermolar distance of male is superior to that of female in class I, class II, and class III, but there is no siginficant difference among them. 2. On maximal opening movement of Angle's classification class I and class II, total mandibular length, mandibular ramal length, madibular inferior border length and upper arch width were important variables and facial length, upper arch length and lower arch length had negative relationship to that. On maximal opening movement of Angle's class III, the upper arch length, the lower arch length and anterior facial length were important variables especially when compared with class I and II, and upper arch width had negative relationship. These results suggest that maximal opening movement is affected by facial morphology in all classes, but each group is affected by different facial skeletal variables. Accordingly, facioskeletal variables might be considered as diagnosis and treatment to improve the amount of mouth opening.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.506-511
• /
• 2004

Biometrics is getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry has been used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. Hence, it can be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. However, during experimentation, it was discovered that length measured from the tip of the finger was not a reliable feature. Hence, we propose a new technique based on Genetic Algorithm for extraction of the center of nail bottom, in order to use it for the length feature.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.381-388
• /
• 2009

This paper proposes a denoising method for the contour edges and crease edges of silhouette obtained from 3D scanned data of stone cultural heritages. It is often the case that the silhouette involves noise in the form of short-length line segments, due to rough surfaces of stone cultural heritages, weathering, and technical difficulties arising in data acquisition. Thus the removal of the short-length line segments from the contour edges and crease edges can result in a clear and accurate silhouette. An efficient computational algorithm is introduced to count the continuity of line segments; edges having not more than 3 line segments are removed. It has been verified that the new method is more effective than threshold-based silhouette extraction methods for stone heritages. Our method is applicable for various other data which are deteriorated by short-length line segments.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.32-40
• /
• 2007

In this paper, the crease extraction method is proposed to improve the accuracy of feature extraction within the fingerprint image. First of all, for each pixel in fingerprint image, it calculates the average grey level and variance to determine if the current pixel composes the crease, and estimates the direction of crease. Secondly, once the direction of every pixel in crease candidate area is estimated, it is decomposed into 8 different images, depending on their direction. The properties of crease consists of the length of the crease candidate area, the correspondence between the crease direction and the pixel distribution direction, the difference between the ridge direction and the pixel distribution direction, and finally the grey level of the candidate pixels. The proposed method finally extracts the crease from the crease clusters estimated from directional images. In conclusion, applying the proposed method improved the accuracy of overall feature extraction by 91.4% by accurately and precisely extracting the crease from fingerprint image.