• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.55-62
• /
• 1990

In this paper, another method for system reliability analysis, called the extended incremental load method, is introduced. The method is an extension of the conventional incremental load method and has been developed aiming at evaluating the probability of system failure(or system reliability) of continuous structures such as floating offshore structures under the multiple loading condition, more realistically considering the post-ultimate behaviour of failed components and directly using the strength formulae of principle components in a structure with employing the modified safety margin equation proposed herein in the system analysis. The method has been applied to the Hutton TLP operated in the Hutton field in the North Sea and a certain variant of the design using the TLP Rule Case Committee type improved strength models. System failure probability and corresponding system reliability indices are derived for a more economical and efficient design. The redundancy characteristics are also addressed. The TLP forms are shown to possess high reserve strength and system safety.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.337-342
• /
• 2016

A spudcan is mounted on the lower leg of the jack-up rig, a device for preventing a rollover of a structure and to support the structure in a stable sea floor. At the time of inserting the surface of the spud can to penetrate when the sand layer is stable and smoothly pulled to the clay layer, and at that time of recovery when uploading the spud can is equipped with a water injection device. In this study, it is significant to optimize the shape of pipelines holes for water injection device and it was set in two kinds of shape, the oval and round. Interpretation of the subject into the site of Gulf of Mexico offshore Wind Turbine Installation Vessels (WTIV) was chosen as a target platform. Using the ANSYS Workbench commercial programs, optimal design was conducted. The results of this study can be applied to the hole-shaped design of various marine structures.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.197-211
• /
• 2016

Loulan was an ancient kingdom located on the northeast of the Taklamakan Desert, a diverging point between the north and south of Silk Road, on the east of the current Turpan, from the 2nd century BC and the 7th century A.D, absorbing and propagating culture of both sides through active trade. Meanwhile, as many previous research investigations suggest the early trade between Korea and the countries bordering on Western China, characteristics of Loulan costume have been found to have similarity to those of ancient Korean costume. Also, it can be compared to costume in other surrounding regions. Therefore, it is a highly valuable region in researching ancient costume. This study examined the historical background of Loulan and its relationship with ancient Korea, analyzed the clothes found in historic sites of Louland and Niya, and compared costume elements of Loulan and those of Korea. The result of the study shows that first, the Loulan Jeogori was based on the Jikryeonggyoim, with Chaksu, narrow sleeves and the length coming between below the chest and above the bottom, and the line decoration and waist belt were very similar to Korean costumes, as well as the Banryeong, curved collar and Bansu, short sleeves. Second, the types of pants included Gunggo, characterized by closed bottom and many creases, and Daegugo, wide-leg trousers, which are very similar in shape to the Korean Shilla lay sculpture, Stele To Martyr Yi Ch'a-don, Yangjikgongdo and Wangheedo. Third, in accessories as well, the Jowu stuck on the Gwanmo is similar in the shapes to Korean costume.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.87-96
• /
• 2014

Objective: The present study is intended to objectively classify upper- & lower-body sitting strategies and identify the effects of gender and OPL type on the sitting strategies. Background: A sitting strategy which statistically represents comfortable driving posture can be used as a reference posture of a humanoid in virtual design and evaluation of a driver's seat. Although previous research has classified sitting strategies for driving postures in various occupant package layout (OPL) types, the existing classification methods are not objective and the factors affecting sitting strategies have not been identified. Method: Forty drivers' preferred driving postures in three different OPL types (coupe, sedan, and SUV) were measured by a motion capture system. Next, the measured driving postures were classified by K-means cluster method. Results: Sitting strategies of upper-body were classified as erect (33%), slouched (41%), and reclined (26%) postures, and those of lower-body were classified as knee bent (42%), knee extended (32%), and upper-leg lifted (26%) postures. Significant differences at ${\alpha}$ = 0.05 in the upper-body sitting strategy by gender and lower-body sitting strategy by OPL type were found. Application: Both the classified sitting strategies and the identified factors would be of use in ergonomic seat design and evaluation.

• Journal of the Korean Society of Costume
• /
• v.57 no.9
• /
• pp.110-123
• /
• 2007

This study is purposed to analyze the characteristics of different images of Hollywood movie costumes centering on the costumes of actresses who are the fashion leaders creating fashions especially focusing on those in 1930s. The scope of this study covers the movie costumes selected from the movies ranging from 1930 to 1939 centering on the Hollywood movies produced and released by large movie distributors and the movie costumes of heroins that exerted great influences on the culture and clothing history of 1930s were examined. As for the methods of study, visual data and image data including movies were collected through related dissertations, articles in journals, internet sites relating to movies and photos and we have analyzed each of the characteristics of the movie costumes appearing in each image. The result of this study is as follows. Firstly, ethnic images were the reflection of orientalism that was popular in the fashion of the age with the purpose of highlighting the exotic appearances of the actresses and were the cases where the characters of the actresses had to be expressed in ethnic styles due to the spatial backgrounds of movie works. Secondly, glamorous images were highlighting the appeals of plump breasts, shoulder lines and the bodies constricted in the middle and the Hollywood movie costumes in 1930s. The smooth and flowing silhouettes of the heroins of the age were mainly long and slim patterns and female's images were expressed by highlighting the beauty of leg lines or especially by halter neck evening dresses that exposed backs and covered breasts. Thirdly, mannish images reflected tough images of males in order to further highlight the reality of the characters of the heroins of the age pursuant to the emergence of the opinions advocating the equality between men and women.

• Journal of the Korean Society of Costume
• /
• v.62 no.3
• /
• pp.84-95
• /
• 2012

The purpose of this study is to provide basic data reflecting body characteristics for production of briefs by classifying lower body types of women in their 40s, 50s and 60s. The results are as follows: First, measurements for height-related items decreased while the measurements for width and depth items increased with age. However, 'hip width' and 'hip depth' items showed no significant differences among the age groups. In addition, no visible differences appeared in the length items among the age groups but 'waist to hip' and 'outside leg' lengths showed decreasing values according to age. Second, four factors were established from the factor analysis: 'obesity level around waist and abdomen', 'vertical length of the lower body', 'thickness and obesity level of lower limbs', and, 'size and shape of buttocks'. Lastly, cluster analysis resulted in the classification of the four factors mentioned above. Type 2 appeared the most, representing women in their 40s~60s. Type 1(n=257) was referred as 'slender with a short lower body', Type 2(n=443) as 'plump with short lower body', Type 3(n=224) as 'slender with long lower body', and Type 4(n=199) as 'obese around abdomen and lower limbs'.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.498-508
• /
• 2016

The purpose of this study is to develop an aesthetic and functional bicycle wear for new senior women in their 50s and 60s. Based on the results of the survey, we developed bicycle wear that is friendly to bicycling posture and reflects the preference of new senior women. The results are as followed: First, emphasis is placed on the simple and functional design of the experimental wear consisting of jacket and pants. Jacket is different from the color scheme with the armhole princess line in order for the waistline to look slim. Pants are designed to hold the leg muscles tightly in order to help reduce the muscle fatigue on the bicycle ride. Second, cutting lines and coloring materials are used for the wearer to look slim and the safety of the wearer is planned to secure by inserting the reflective material along the cutting lines on the bicycle ride. Third, the pattern of the experimental wear is designed in consideration of the riding motion of the bicycle. Jacket is designed to have back length longer than front length as compared to the bicycle wears available on the market. Sewing lines in the armpit are designed to be eliminated in order to move the arms smoothly on the ride. Pants are designed to minimize the seam line in consideration of the movement of muscles and ligaments and the experimental wear is produced by combining the material with the functions of cool comfort and stretch.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.4
• /
• pp.210-217
• /
• 2019

Objective: This study was conducted to compare the immediate effect of hamstring stretching techniques of static stretching, proprioceptive neuromuscular facilitation (PNF) hold-relax and PNF irradiation on the hamstring muscle. Design: Three-group pretest-posttest design. Methods: Fifty-one subjects with shortened hamstrings were randomly assigned to the static stretching group (n=17), PNF hold-relax group (n=17), and the PNF irradiation group (n=17). All subjects performed an active knee extension (AKE) test to assess for the lower extremity with a shortened hamstring. The static stretching group performed stretches by lifting their leg to the maximum extent (3 times, 30 seconds). The PNF hold-relax group performed maximal isometric contraction against the experimenter's resistance (3 times, 10 seconds). The PNF irradiation group performed maximum isometric contraction against the experimenter's resistance toward the direction of the body (5 times, 5 seconds). The pre and post-tests measured range of motion (ROM), pressure pain thresholds (PPT) and muscle tone. Results: There were significant differences in ROM and PPT between pre and post intervention in each group (p<0.05). There was a significant difference only in the ROM among groups (p<0.05). Post-hoc analysis showed that the changes in ROM occurred in the order of the PNF hold-relax group, static stretching group and PNF irradiation group (p<0.05). Conclusions: The findings of this study suggest that the PNF irradiation technique may improve ROM and may be used to improve ROM similar to other stretching techniques. Therefore, the PNF irradiation technique could be included in stretching programs and can be used as a suitable stretching method depending on the situation.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.4
• /
• pp.225-233
• /
• 2019

Objective: The purpose of this study was to examine the possible effects of incorporating short-term slow-abdominal respiration (SAR) into an exercise program, on balance and the cardiac-related autonomic nervous system (ANS). Design: Cross-over repeated measures design. Methods: Fifteen young and healthy adults were randomly assigned into two groups (7 in the C-R group, 8 in the R-C group), each of which carried out both control sequence (C) and respiration-experiment sequence (R) in the inverse order. In the C sequence, the subjects performed passive exercises and a general exercise program (P-GEP). In the R sequence, the subjects received a short-term SAR training session and then performed the respiration incorporated general exercises program (R-RGEP). Before and after both C and R sequences, the length and the area of the displacement of the center of pressure (COP) and heart rate variability parameters were measured. Results: The total length of the COP displacement in the left single-leg-standing condition showed a significantly greater reduction after R-RGEP in the respiration-experiment sequence than after the P-GEP in the control sequence (p<0.05). The mean heart rate was significantly reduced only after R-RGEP in the respiration-experiment sequence (p<0.05) Conclusions: The slow-abdominal-respiration, trained in a simple manner and integrated into the exercise program in a single session, showed partially positive immediate effects on balance stabilization. The decrease in heart rate indicated possible involvement of the parasympathetic ANS activation in the stability, although it is not enough to decide whether it is purely due to the controlled respiration.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.196-202
• /
• 2006

In this study the swimwear pattern focused on a typical middle-aged women's body was developed and discussed. To determine the characteristics of a typical middle-aged women's body, their actual bust were cast. According to a generated flattened body surface shell, the right side of pattern was designed considering stretching ratio of swimwear materials as shown in the figure 3. Special features of the developed swimwear pattern are a bust dart, a particularly designed lining, a power-net, and a brassiere-cup. Against a commercial swimwear pattern, the darts were applied to bust area considering its volume. The lining was attached on the entire right side except brassiere part, and power-net was added twice on belly and hip part. As a result, silhouette and body shape were improved. The new brassiere-cup was designed and made to satisfy the middle-aged women's demand about their bust volume. Swimwear fitting test was performed, and it was evaluated. The developed swimwear rated activity, body support, entire silhouette, pressure, comfortable fitting, suitability with body figure, nudity higher by comparison with a commercial swimwear, as shown in the Table 6. Specially the developed swimwear satisfied future customers about a bust, a hip, a waist, a belly area, which the middle-aged women are not confident. Reducing exposure of an armhole and upper leg area, it also satisfied them. New developed swimwear pattern will provide useful reference to swimwear businesses targeting middle-aged women.