• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1047-1054
• /
• 2005

The purpose of this study is the understanding to changes in the characteristic of soil structure and classification, atterberg limits, undrained shear strength and consolidation of clayey soil dependent on pH of soil pore water. A series of tests including consistency tests, uniaxial compressive tests, vane tests and oedometer tests are performed on. The test results indicated that pH changes in the soil pH resulted in changes in the soil structure and classification, stress-strain behavior. Specially, when pH is conditioned to 7, liquid limit, undrained shear strength and preconsolidation pressure are the largest.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1562-1571
• /
• 2005

The use of geogrid for SRW systems and bridge abutment has increased rapidly over the past 10 years in Korea. The concept of segmental retaining walls and reinforced soil is very old and for example The Ziggurats of Babylonia(i.e. Tower of Babel) were built some 2,500 to 3,000 years ago using soil reinforcing methods very similar to those described in current design. Modern SRW(Semental Retaining Wall) units were introduced in 1960's as concrete crib retaining wall systems. In this paper, the friction properties between segmental concrete units and geogrid are investigated by performing various tests.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.678-683
• /
• 2004

The most popular consolidation tester is a standard consolidatiion tester, which performs consolidation using the step load weight. However this apparatus is used to obtain only the vertical consolidation coefficient. Therefore the purpose of this study is to develope the horizontal consolidation cell for a horizaontal consolidation coefficient. Various size of tests have been peroformed to investigate the effect of scale effect. From the test results, it has turned out that this horizontal consolidation cell has a good function for a horizontal consolidation coefficient.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.469-474
• /
• 2004

본 연구는 유류로 오염된 지반을 개선하는데 초음파를 사용한다는 점에 초점을 둔다. 초음파의 원리는 고체의 재료가 음파의 좋은 전도체라는 사실에 근거를 두고 있다. 초음파에 의한 정화는 초음파의 적용에 의해 재료의 표면이 변화되고 그것에 의해 오염물질이 제거된다는 것을 의미한다. 본 연구에서는 초음파의 지속, 간극률, 초음파력, 입자의 크기와 유속율 같은 초음파 취급에 영향을 끼치는 요소들을 고려하여, 초음파를 쓴 것과 쓰지 않은 오염된 흙을 다룬 결과를 비교 분석하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.890-896
• /
• 2004

This study is intended as an investigation of the EK remediation characteristics of natural soil with treatment time under unsaturated conditions. EK tests are performed under the voltage gradient of 1V/cm, the degree of saturation of 82.8%, and the installing of cation exchange membrane. It was found from the results that the acid front is initially transported at 0.75cm/day and then continuously degreased until the transport velocity of the acid front is balanced to the velocity of the base front. The residual lead concentration indicated the maximum value at the treatment time of lOdays, then the increasing of treatment time largely decreases the concentration within the sample though electromigration than electroosmosis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.978-985
• /
• 2004

Geogrid may be damaged during its installation in the filed. The installation damage mainly depends on two factors, which are materials used and construction activities. Materials relate to geogrid and soils, and construction activities are mainly related to installation of geogrid and compaction of soils. This paper describes the results of a series of field tests, which were conducted to assess the installation damage of the various geogrids according to different fill materials. After field installation damage tests, the change in tensile strength of geogrids was determined from wide width tensile tests using both damaged and undamaged specimens.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.372-379
• /
• 2004

The model tests were conducted to assess the behavior characteristics of geogrid reinforced earth walls according to various surcharge loads and reinforcement spacing. The models were built in the box having dimension, 100cm tall, 140cm long, and 100cm wide. The reinforcement used was geogrid(tensile strength 2.26t/m). Decomposed granite soil(ML) was used as a backfill material. The LVDTs were installed on the model retaining walls to obtain the displacements of the facing. In the results, the maximum displacement of facing and tensile strain of geogrid was measured at 0.7H(H is wall height) from the bottom of reinforced wall.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.826-829
• /
• 2006

In order to increase the transmittance of panel, in process of FFS TFT-LCD, fine patterning process which is adopted to the optimum passivation(PVX) hole was applied fine metal line patterning process and was made with optimum efficiency of liquid crystal by using space/bar size control of pixel electrode. We fabricated 2.03" mobile FFS devices with fine patterning process. Further, this technology will be applied to the basis of other process for higher PPI or higher aperture ratio technology.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.416-428
• /
• 1999

A user-interactive pixel design tool for high-quality TFT-LCDs is realized and used to explore the sensitivity of the various array and device parameters for optimizing pixel design. In this tool, the Thompson cable equation and gradual-channel approximation were used for the gate time delay and TFT current modeling respectively. With this tool, each capacitance element, and TFT and array dimensions can be optimized under given design specifications. The electrical characteristics such ascharging ratio, gate time delay, pixel voltage level-shift, and holding ratio can be analyzed. The sensitivity analysis of those design parameters were executed and presented.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.330-332
• /
• 2002

There are a lot errors and little accuracy when calculating the grounding resistance with the transposition methods in the equivalent surface of hemisphere electrode. Therefore we should calculate the grounding resistance by using the mesh factor. In this paper, we would estimated the grounding value of mesh electrode with water tank model & estimation method using the reduced scale ratio of mesh electrode based on the theory of model electrode & proportional factor according to the reduced scale ratio. And also we have confirmed the accuracy of the empirical formula of model electrode by using by regression analysis.