• 연구논문집
• /
• s.23
• /
• pp.155-164
• /
• 1993

A drawing technique which use only fine curves and dashed lines is widely adopted in banknotes and post stamps printing. Engraving of the curves and lines are traditionally performed by hand skill which provides low productivity in printing. As an effort for higher productivity and quality, a drawing automation method which can easily produce NC codes and drawings for a mechanical or chemical engraving is proposed. An initial work shows that it is possible to draw a portrait by contolling the width and length of predetermined fine lines according to the gray scale at the end points of each line. User interface functions of a commercial CAD system are heavily employed to exploit the presented method.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.1
• /
• pp.67-73
• /
• 1998

A bacterial strain that excretes hemolysins and proteases into the growth medium was isolated from sea water and designated as KYJ 961. A nearly complete nucleotide sequence of a 16S ribosomal RNA gene from the isolate was determined following the isolation and cloning of amplified genes. On the basis of the 16S ribosomal DNA sequence data, and morphological, chemotaxonomic, and physiological characteristics, strain KYJ 961 was classified as a strain of Bacillus cereus.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.4
• /
• pp.232-239
• /
• 1991

Caboxymethyl cellulase (CMCase) I was purified from the induced culture filtrate of Penicllium verruculosum F-3 by ammonium sulfate precipitation, DEAE-Sephadex A-50 chromatography and Bio-gel P-150 filtration. The purified enzyme was assumed to be a glycoprotein consisting of 8.5% carbohydrate and having a molecular weight of 70.000 in SDS-polycrylamide gel electrophoresis (SDS-PAGE). The purified enzyme-specific anti-CMCase I IgG was obtained by rabbit immunization and protein A-sepharose CL-4B chromatography. The fungal poly($A^+$) RNA was isolated from the total RNA of the mycelium grown under cellulase induction conditions by oligo(dT)-cellulosse chromatography. The translation products in vitro were prepared by translating the isolated poly ($A^+$) RNA in rabbit reticulocyte lysate and analyzed by SDS-PAGE and fluorography. Of the translation products, CMCase I was identified by the immunoprecipitation against anti-CMCase I IgG.

• Journal of Astronomy and Space Sciences
• /
• v.6 no.2
• /
• pp.109-117
• /
• 1989

A total of 266 photoelectric observations(91 in V, 93 in B, and 82 in U) for an eclipsing binary, ZZ Cnc, has been secured by using the 61-cm reflector and an uncooled iP21 photomultiplier phototube of Yonsei University Observatory during 4 years from March 1984 to May 1988. One time of minimum light, JD 2446887.534 is obtained. Although Kim et al.(1988) suggested the possibility of the period change, the present study shows that the orbital period of ZZ Cnc should be constant. According in a reasonable interpretation of the eclipse light curves. Min I = JD Hel 2446887.574+25d.5944E $pm$2 $pm$2 may be useflul as new light elements for future observations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1305-1307
• /
• 2007

We show that the electrical properties of organic thinfilm transistors(OTFTs) can be enhanced by controlling the morphology of interface between screen printed electrodes and gate dielectrics. Modified surface of the insulator layer($SiO_2$) affect on the interface energy of electrode on $SiO_2$ layer. Contact angle measurement and FT-IR spectrum shows that the interface is properly modified. OTFTs device with high efficiency has been realized through modification of interface layer.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.927-929
• /
• 2001

Induction Motor fed by PWM inverter generates the sound and the vibration because of harmonic current and magnetic force characteristics. This paper is investigated the harmonic frequency and noise characteristics of the current and the torque of the induction motor when the input voltage is excited as the sine wave or PWM wave. The performance characteristics of induction motor is analyzed by the F.E.M and the theoretical method.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.630-632
• /
• 1999

본 논문에서는 3차원 공간에서의 물체의 위치와 이동을 인식하는 방법을 소개하고자 한다. 특히 물체의 인식에 있어서 많은 시간을 요하는 이미지 처리 부분을 적은 계산량으로 Image Matching을 구현하려 하였으며, Stereo Vision으로 인식하게 될 고정된 위치로부터의 거리계산으로 기준위치를 인식하고, 움직이는 물체는 비교적 간단한 Filtering을 이용하여 인식할 수 있게 하였다. Image Processing으로부터 얻어지는 데이터들로 움직이는 물체의 방향을 설정하고 이를 통하여, 이동 로봇과의 충돌의 가능성을 파악할 수 있게 하는 방법을 소개하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.353-354
• /
• 2006

계통운영 보조서비스는 전력계통의 안정성 확보, 전기품질 유지 및 전력거래 활성화를 위한 필수적인 서비스이다. 계통운영보조서비스의 비용요소는 연료비, 운영유지비, 자본비용, 기회비용으로 구분된다. 이의 적정비용규모를 산정하여 보조서비스 제공자에게 보상함으로써 전력의 공급안정성 화보에 크게 기여할 수 있게 된다. 여기서는 국내 전력시장에서 연료비와 운영유지비 측면에서 적정비용규모를 산정하고 현재 운용중인 시장규칙과 비하여 개선방안을 제시한다.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.136-138
• /
• 2006

Recently, network systems are widely used in several areas, and some considerable attentions have been directed to the Networked Control System(NCS). In NCS, network-induced delays are inevitable, and they sometimes degrade the performance of networked control systems to be a source of potential instability. In this paper, We proposes a compensation method for networked control system subject to network-induced delays by using a simple method, which is based on a sort of predictive strategy. To evaluate its feasibility and effectiveness, a real-time NCS for a rotary inverted pendulum is implemented via an Ethernet. Based on the experimental results. we show that the proposed simple method can be a practical and feasible solution to NCS design.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.1037-1040
• /
• 1998

In this research a fault-tolerant and bumpless switching control is proposed for boiler systems used in the power plants. Firstly, three operating points are selected to control the nonlinear boiler through the full operational range, and the $H_{\infty}$ loop shaping controller and the model-based predictive controller(MBPC) are designed. To prevent the windup and bump problems which are caused by the actuator saturation and the controller switching, an anti-windup and bumpless transfer technique is adopted to the $H_{\infty}$ loop shaping controller. Also the constrained gain-scheduling technique is applied to MBPC to achieve the same objective. Secondly, the fault-tolerant control technique is proposed to continue the control action without stopping the boiler operation even in case of some faults. Through various simulation studies, the performances of the proposed control techniques are demonstrated.